LANCOM-GS-2352P-MIB DEFINITIONS ::= BEGIN IMPORTS DisplayString,MacAddress FROM SNMPv2-TC MODULE-COMPLIANCE,OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF ifIndex FROM RFC1213-MIB enterprises,MODULE-IDENTITY,OBJECT-TYPE,NOTIFICATION-TYPE,Counter32,Counter64,IpAddress FROM SNMPv2-SMI InetAddress FROM INET-ADDRESS-MIB MacAddress FROM BRIDGE-MIB; lancom-systems MODULE-IDENTITY LAST-UPDATED "202002190000Z" ORGANIZATION "LANCOM Systems GmbH." CONTACT-INFO "Adenauerstrasse 20 / B2, 52146 Wuerselen, Germany Email: info@lancom.de TEL: +49 (0)2405 49936 0 FAX: +49 (0)2405 49936 99" DESCRIPTION "The MIB module is for LANCOM Systems" ::= { enterprises 2356 } switchingSystems OBJECT IDENTIFIER ::= { lancom-systems 800 } gigabitEthernetSwitches OBJECT IDENTIFIER ::= { switchingSystems 3 } lancomGS2352P OBJECT IDENTIFIER ::= { gigabitEthernetSwitches 2353 } gs2352pSystem OBJECT IDENTIFIER ::= { lancomGS2352P 1 } gs2352pSystemInformation OBJECT IDENTIFIER ::= { gs2352pSystem 1 } gs2352pModelName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 1 } gs2352pBIOSVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 2 } gs2352pFirmwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 3 } gs2352pHardwareMechanicalVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 4 } gs2352pSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 5 } gs2352pHostMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 6 } gs2352pConsoleBaudrate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 7 } gs2352pRAMSize OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 8 } gs2352pFlashSize OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 9 } gs2352pBridgeFDBSize OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 10 } gs2352pTransmitQueue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 11 } gs2352pMaximumFrameSize OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 12 } gs2352pCPULoad OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 13 } gs2352pFanSpeed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 17 } gs2352pACPower OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 18 } gs2352pTemperature OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 19 } gs2352pSystemDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 21 } gs2352pLocation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 22 } gs2352pContact OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 23 } gs2352pDeviceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 24 } gs2352pSystemDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 25 } gs2352pSystemUptime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 26 } gs2352pSystemIPv4Address OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 27 } gs2352pSystemIPv4SubnetMask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 28 } gs2352pSystemIPv4Gateway OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 29 } gs2352pIPv6LinkLocalAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 30 } gs2352pIPv6Address OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 31 } gs2352pIPv6Prefix OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 32 } gs2352pIPv6Gateway OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pSystemInformation 33 } gs2352pLargestFreeMemBlock OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Largest free memory block in Kb" ::= { gs2352pSystemInformation 1500 } gs2352pMemFree OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Free memory in Kb" ::= { gs2352pSystemInformation 1501 } gs2352pSystemTime OBJECT IDENTIFIER ::= { gs2352pSystem 2 } gs2352pSystemTimeManual OBJECT IDENTIFIER ::= { gs2352pSystemTime 1 } gs2352pSystemTimeManualClockSource OBJECT-TYPE SYNTAX INTEGER {useLocal(0),useNTP(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0 : Use Local Settings, 1 : Use NTP Server." ::= { gs2352pSystemTimeManual 1 } gs2352pSystemTimeManualLocaltime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the system time of the device. The input format is 'Year-Month-Day Hour:Minute:Second'. ex: 2011-01-01 05:43:05 means 2011/1/1 - 05:43:05 . The value range: Year : 2010 - 2090, Mouth : 1 - 12, Day : 1 - 31, Hour : 0 - 23, Minute : 0 - 59, Sec : 0 - 59." ::= { gs2352pSystemTimeManual 2 } gs2352pSystemTimeManualTimeZoneOffset OBJECT-TYPE SYNTAX INTEGER(-720..780) MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the NTP Time Zone. The value range is between -720 and 780 (minutes)." ::= { gs2352pSystemTimeManual 3 } gs2352pSystemTimeManualDaylightSavings OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0 : Disable, 1 : Enable." ::= { gs2352pSystemTimeManual 4 } gs2352pSystemTimeManualTimeSetOffset OBJECT-TYPE SYNTAX Integer32(1..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Daylight Saving Time. The value range is between 1 and 1440 (minutes), Default : 60 (minutes)." ::= { gs2352pSystemTimeManual 5 } gs2352pSystemTimeManualDaylightSavingsType OBJECT-TYPE SYNTAX INTEGER { byDates(0), recurring(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0 : By dates, 1 : Recurring." ::= { gs2352pSystemTimeManual 6 } gs2352pSystemTimeManualDaylightSavingsBydatesFrom OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Start time of By dates Daylight Savings. The input format is 'Year-Month-Day Hour:Minute'. ex: 2011-01-01 05:43 means 2011/1/1 - 05:43 . The value range: Year : 2010 - 2090, Mouth : 1 - 12, Day : 1 - 31, Hour : 0 - 23, Minute : 0 - 59." ::= { gs2352pSystemTimeManual 7 } gs2352pSystemTimeManualDaylightSavingsBydatesTo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the End time of By dates Daylight Savings. The input format is 'Year-Month-Day Hour:Minute'. ex: 2011-01-01 05:43 means 2011/1/1 - 05:43 . The value range: Year : 2010 - 2090, Mouth : 1 - 12, Day : 1 - 31, Hour : 0 - 23, Minute : 0 - 59." ::= { gs2352pSystemTimeManual 8 } gs2352pSystemTimeManualDaylightSavingsRecurringDayFrom OBJECT-TYPE SYNTAX INTEGER { sunday(0), monday(1), tuseday(2), wednesday(3), thursday(4), friday(5), saturday(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Daylight Saving Time Day From. 0 : Sun, 1 : Mon, 2 : Tue, 3 : Wed, 4 : Thu, 5 : Fri, 6 : Sat." ::= { gs2352pSystemTimeManual 9 } gs2352pSystemTimeManualDaylightSavingsRecurringWeekFrom OBJECT-TYPE SYNTAX INTEGER{ firstWeek(1), secondWeek(2), thirdWeek(3), fourthWeek(4), listWeek(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Daylight Saving Time Week From. 1 : first week, 2, 3, 4, 5 : last week" ::= { gs2352pSystemTimeManual 10 } gs2352pSystemTimeManualDaylightSavingsRecurringMonthFrom OBJECT-TYPE SYNTAX INTEGER { jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Daylight Saving Time Month From. 1 : Jan, 2 : Feb, 3 : Mar, 4 : Apr, 5 : May, 6 : Jun, 7 : Jul, 8 : Aug, 9 : Sep, 10 : Oct, 11 : Nov, 12 : Dec." ::= { gs2352pSystemTimeManual 11 } gs2352pSystemTimeManualDaylightSavingsRecurringTimeFrom OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Start time of By dates Daylight Savings. The input format is 'Hour:Minute'. ex: 05:43. The value range: Hour : 0 - 23, Minute : 0 - 59." ::= { gs2352pSystemTimeManual 12 } gs2352pSystemTimeManualDaylightSavingsRecurringDayTo OBJECT-TYPE SYNTAX INTEGER { sunday(0), monday(1), tuseday(2), wednesday(3), thursday(4), friday(5), saturday(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Daylight Saving Time Day To. 0 : Sun, 1 : Mon, 2 : Tue, 3 : Wed, 4 : Thu, 5 : Fri, 6 : Sat." ::= { gs2352pSystemTimeManual 13 } gs2352pSystemTimeManualDaylightSavingsRecurringWeekTo OBJECT-TYPE SYNTAX INTEGER{ firstWeek(1), secondWeek(2), thirdWeek(3), fourthWeek(4), listWeek(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Daylight Saving Time Week To. 1 : first week, 2, 3, 4, 5 : last week" ::= { gs2352pSystemTimeManual 14 } gs2352pSystemTimeManualDaylightSavingsRecurringMonthTo OBJECT-TYPE SYNTAX INTEGER { jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Daylight Saving Time Month To. 1 : Jan, 2 : Feb, 3 : Mar, 4 : Apr, 5 : May, 6 : Jun, 7 : Jul, 8 : Aug, 9 : Sep, 10 : Oct, 11 : Nov, 12 : Dec." ::= { gs2352pSystemTimeManual 15 } gs2352pSystemTimeManualDaylightSavingsRecurringTimeTo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Start time of By dates Daylight Savings. The input format is 'Hour:Minute'. ex: 05:43. The value range: Hour : 0 - 23, Minute : 0 - 59." ::= { gs2352pSystemTimeManual 16 } gs2352pSystemTimeNTP OBJECT IDENTIFIER ::= { gs2352pSystemTime 2 } gs2352pSystemTimeNTPTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PSystemTimeNTPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pSystemTimeNTP 1 } gs2352pSystemTimeNTPEntry OBJECT-TYPE SYNTAX GS2352PSystemTimeNTPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pSystemTimeNTPIndex } ::= { gs2352pSystemTimeNTPTable 1 } GS2352PSystemTimeNTPEntry ::= SEQUENCE { gs2352pSystemTimeNTPIndex Integer32, gs2352pSystemTimeNTPServerIPType INTEGER, gs2352pSystemTimeNTPServer DisplayString, gs2352pSystemTimeNTPCurrentMode INTEGER } gs2352pSystemTimeNTPIndex OBJECT-TYPE SYNTAX Integer32(1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION " The index of the ntp entry. " ::= { gs2352pSystemTimeNTPEntry 1 } gs2352pSystemTimeNTPServerIPType OBJECT-TYPE SYNTAX INTEGER { ipv4(0), ipv6(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Default: 0, 0 : IPv4, 1 : IPv6." ::= { gs2352pSystemTimeNTPEntry 2 } gs2352pSystemTimeNTPServer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the NTP Time Server1. You can use the IP address or domain name." ::= { gs2352pSystemTimeNTPEntry 3 } gs2352pSystemTimeNTPCurrentMode OBJECT-TYPE SYNTAX INTEGER { empty(0), active(1), edit(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " 0: Empty 1: Active 2: Edit 3: Delete" ::= { gs2352pSystemTimeNTPEntry 4 } gs2352pSystemTimeNTPRequestInterval OBJECT-TYPE SYNTAX INTEGER(60..999999999) MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the NTP Request Interval. Default : 86400. The value range is between 60 and 999999999 (seconds)." ::= { gs2352pSystemTimeNTP 2 } gs2352pSystemTimeNTPTriesNumber OBJECT-TYPE SYNTAX INTEGER(0..999999999) MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the NTP Number of tries. Default : 4. The value range is between 0 and 999999999." ::= { gs2352pSystemTimeNTP 3 } gs2352pSystemAccount OBJECT IDENTIFIER ::= { gs2352pSystem 3 } gs2352pSystemAccountUsers OBJECT IDENTIFIER ::= { gs2352pSystemAccount 1 } gs2352pSystemAccountUserCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create a user account" ::= { gs2352pSystemAccountUsers 1 } gs2352pSystemAccountUsersTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PSystemAccountUsersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pSystemAccountUsers 2 } gs2352pSystemAccountUsersEntry OBJECT-TYPE SYNTAX GS2352PSystemAccountUsersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pUserIndex } ::= { gs2352pSystemAccountUsersTable 1 } GS2352PSystemAccountUsersEntry ::= SEQUENCE { gs2352pUserIndex Integer32 , gs2352pUserName DisplayString, gs2352pPassword DisplayString, gs2352pUserPrivilegeLevel Integer32 , gs2352pAccountUserRowStatus INTEGER } gs2352pUserIndex OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pSystemAccountUsersEntry 1 } gs2352pUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Please use a combination of letters, numbers and underscores" ::= { gs2352pSystemAccountUsersEntry 2 } gs2352pPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Please use ASCII printable code except Quotation mark, Colon (punctuation), Less-than sign, Greater-than sign, At sign, Question mark and Space (punctuation)" ::= { gs2352pSystemAccountUsersEntry 3 } gs2352pUserPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "default:1 User privilege level range : 1 - 15" ::= { gs2352pSystemAccountUsersEntry 4 } gs2352pAccountUserRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), edit(3), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION " 1: active 2: notInservice 3: edit 4: destroy 5: undo" ::= { gs2352pSystemAccountUsersEntry 5 } gs2352pSystemAccountUsersSuperUserPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Super-User Password" ::= { gs2352pSystemAccountUsers 1500 } gs2352pSystemAccountEnforcePasswordRules OBJECT-TYPE SYNTAX INTEGER { yes(0), no(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : Do not enforce rules 1 : enforce rules" ::= { gs2352pSystemAccountUsers 1501 } gs2352pSystemAccountPrivilegeLevel OBJECT IDENTIFIER ::= { gs2352pSystemAccount 2 } gs2352pAccountPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 1 } gs2352pAggregationPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 2 } gs2352pDiagnosticsPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 3 } gs2352pEasyportPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 9 } gs2352pGARPPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 10 } gs2352pGVRPPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 11 } gs2352pIPPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 12 } gs2352pIPMCSnoopingPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 13 } gs2352pLACPPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 14 } gs2352pLLDPPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 15 } gs2352pLLDPMEDPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 16 } gs2352pLoopProtectPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 17 } gs2352pMACTablePrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 18 } gs2352pMVRPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 22 } gs2352pMaintenancePrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 24 } gs2352pMirroringPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 25 } gs2352pPortsPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 27 } gs2352pPrivateVLANsPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 28 } gs2352pQoSPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 29 } gs2352pSFlowPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 30 } gs2352pSMTPPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 31 } gs2352pSNMPPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 32 } gs2352pSecurityPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 33 } gs2352pSingleIPPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 34 } gs2352pSpanningTreePrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 35 } gs2352pSystemPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 36 } gs2352pTrapEventPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 37 } gs2352pUPnPPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 38 } gs2352pVCLPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 39 } gs2352pVLANsPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 41 } gs2352pVoiceVLANPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 42 } gs2352pPOEPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2352pSystemAccountPrivilegeLevel 43 } gs2352pIP OBJECT IDENTIFIER ::= { gs2352pSystem 4 } gs2352pIPv4 OBJECT IDENTIFIER ::= { gs2352pIP 1 } gs2352pIPv4Configured OBJECT IDENTIFIER ::= { gs2352pIPv4 1 } gs2352pIpv4DHCPClient OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default:0 0: disable 1: enable" ::= { gs2352pIPv4Configured 1 } gs2352pIPv4Address OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { gs2352pIPv4Configured 2 } gs2352pIPv4Mask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { gs2352pIPv4Configured 3 } gs2352pIPv4Gateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { gs2352pIPv4Configured 4 } gs2352pIPv4VLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "default:1" ::= { gs2352pIPv4Configured 5 } gs2352pIPv4DNSServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { gs2352pIPv4Configured 6 } gs2352pIPv4DNSProxy OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0:disable, 1:enable " ::= { gs2352pIPv4Configured 7 } gs2352pIPv4Current OBJECT IDENTIFIER ::= { gs2352pIPv4 2 } gs2352pIpv4CurrentDHCPClient OBJECT-TYPE SYNTAX INTEGER { none(0), renew(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default:0 0: none (for read) 1: renew" ::= { gs2352pIPv4Current 1 } gs2352pIPv4CurrentAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pIPv4Current 2 } gs2352pIPv4CurrentMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pIPv4Current 3 } gs2352pIPv4CurrentGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pIPv4Current 4 } gs2352pIPv4CurrentVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "default:1" ::= { gs2352pIPv4Current 5 } gs2352pIPv4CurrentDNSServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pIPv4Current 6 } gs2352pIPv6 OBJECT IDENTIFIER ::= { gs2352pIP 2 } gs2352pIPv6Configured OBJECT IDENTIFIER ::= { gs2352pIPv6 1 } gs2352pIpv6AutoConfiguration OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default:0 0: disable 1: enable" ::= { gs2352pIPv6Configured 1 } gs2352pIpv6Address OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { gs2352pIPv6Configured 2 } gs2352pIpv6Prefix OBJECT-TYPE SYNTAX Integer32(1..128) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 96" ::= { gs2352pIPv6Configured 3 } gs2352pIpv6Gateway OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { gs2352pIPv6Configured 4 } gs2352pIPv6Current OBJECT IDENTIFIER ::= { gs2352pIPv6 2 } gs2352pIpv6CurrentAutoConfiguration OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "default:0 0: disable 1: enable" ::= { gs2352pIPv6Current 1 } gs2352pIpv6CurrentAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pIPv6Current 2 } gs2352pIpv6CurrentLinkLocalAddress OBJECT-TYPE SYNTAX DisplayString(SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pIPv6Current 3 } gs2352pIpv6CurrentPrefix OBJECT-TYPE SYNTAX DisplayString(SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pIPv6Current 4 } gs2352pIpv6CurrentGateway OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pIPv6Current 5 } gs2352pSyslog OBJECT IDENTIFIER ::= { gs2352pSystem 5 } gs2352pSyslogConf OBJECT IDENTIFIER ::= { gs2352pSyslog 1 } gs2352pServerMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2352pSyslogConf 1 } gs2352pServerAddress1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { gs2352pSyslogConf 2 } gs2352pServerAddress2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { gs2352pSyslogConf 3 } gs2352pSyslogLevel OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 6 (Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pSyslogConf 4 } gs2352pSyslogDetailedInfo OBJECT IDENTIFIER ::= { gs2352pSyslog 2 } gs2352pSyslogDetailedInfoClear OBJECT-TYPE SYNTAX INTEGER { none(0), clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Clear Syslog" ::= { gs2352pSyslogDetailedInfo 1 } gs2352pSyslogDetailedInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PSyslogDetailedInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pSyslogDetailedInfo 2 } gs2352pSyslogDetailedInfoEntry OBJECT-TYPE SYNTAX GS2352PSyslogDetailedInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pSyslogDetailedInfoIndex } ::= { gs2352pSyslogDetailedInfoTable 1 } GS2352PSyslogDetailedInfoEntry ::= SEQUENCE { gs2352pSyslogDetailedInfoIndex Integer32, gs2352pSyslogDetailedInfoLevel DisplayString, gs2352pSyslogDetailedInfoTime DisplayString, gs2352pSyslogDetailedInfoMessage DisplayString } gs2352pSyslogDetailedInfoIndex OBJECT-TYPE SYNTAX Integer32(1..1024) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pSyslogDetailedInfoEntry 1 } gs2352pSyslogDetailedInfoLevel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSyslogDetailedInfoEntry 2 } gs2352pSyslogDetailedInfoTime OBJECT-TYPE SYNTAX DisplayString(SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSyslogDetailedInfoEntry 3 } gs2352pSyslogDetailedInfoMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSyslogDetailedInfoEntry 4 } gs2352pSnmp OBJECT IDENTIFIER ::= { gs2352pSystem 6 } gs2352pSnmpConf OBJECT IDENTIFIER ::= { gs2352pSnmp 1 } gs2352pGetCommunityMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the get-community mode of the SNMP. default : 1, 0: disable, 1: enable. " ::= { gs2352pSnmpConf 1 } gs2352pGetCommunity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the get-community of the SNMP." ::= { gs2352pSnmpConf 2 } gs2352pSetCommunityMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the set-community mode of the SNMP. default : 1, 0: disable, 1: enable. " ::= { gs2352pSnmpConf 3 } gs2352pSetCommunity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the set-community of the SNMP." ::= { gs2352pSnmpConf 4 } gs2352pGetCommunityConfTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PGetCommunityConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show get-community of the SNMP. " ::= { gs2352pSnmpConf 5 } gs2352pGetCommunityConfEntry OBJECT-TYPE SYNTAX GS2352PGetCommunityConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pCommunityConfIndex } ::= { gs2352pGetCommunityConfTable 1 } GS2352PGetCommunityConfEntry ::= SEQUENCE { gs2352pCommunityConfIndex Integer32, gs2352pCommunityConfGetCommunity DisplayString } gs2352pCommunityConfIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " index, range : 1 - 5. " ::= { gs2352pGetCommunityConfEntry 1 } gs2352pCommunityConfGetCommunity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Get/Set the get-community of the SNMP." ::= { gs2352pGetCommunityConfEntry 2 } gs2352pTrapHostConfTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PTrapHostConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of trap host entry. The numbers of entries are given by the value of gs2352pTrapHostConfNumber." ::= { gs2352pSnmpConf 6 } gs2352pTrapHostConfEntry OBJECT-TYPE SYNTAX GS2352PTrapHostConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the entry information for trap host." INDEX { gs2352pTrapHostConfIndex } ::= { gs2352pTrapHostConfTable 1 } GS2352PTrapHostConfEntry ::= SEQUENCE { gs2352pTrapHostConfIndex Integer32, gs2352pTrapHostConfVersion INTEGER, gs2352pTrapHostConfIPType INTEGER, gs2352pTrapHostConfIP DisplayString, gs2352pTrapHostConfPort Integer32, gs2352pTrapHostConfCommunity DisplayString, gs2352pTrapHostConfSeverityLevel INTEGER, gs2352pTrapHostConfSecurityLevel INTEGER, gs2352pTrapHostConfAuthPtc INTEGER, gs2352pTrapHostConfAuthPassword DisplayString, gs2352pTrapHostConfPrivPtc INTEGER, gs2352pTrapHostConfPrivPassword DisplayString, gs2352pTrapHostConfCurrentMode INTEGER } gs2352pTrapHostConfIndex OBJECT-TYPE SYNTAX Integer32(1..6) MAX-ACCESS not-accessible STATUS current DESCRIPTION " The index of the trap host entry. " ::= { gs2352pTrapHostConfEntry 1 } gs2352pTrapHostConfVersion OBJECT-TYPE SYNTAX INTEGER { snmpv2c(2), snmpv3(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The version of the Trap PDU. Version : 2(SNMPv2c), 3(SNMPv3)" ::= { gs2352pTrapHostConfEntry 2 } gs2352pTrapHostConfIPType OBJECT-TYPE SYNTAX INTEGER { ipv4(4), ipv6(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Server IP Type. Default: 4, 4 : IPv4, 6 : IPv6." ::= { gs2352pTrapHostConfEntry 3 } gs2352pTrapHostConfIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This is the IP of the trap host." ::= { gs2352pTrapHostConfEntry 4 } gs2352pTrapHostConfPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the receiving-port number of the trap host. range : 1 - 65535." ::= { gs2352pTrapHostConfEntry 5 } gs2352pTrapHostConfCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The community/security name for the trap PDU." ::= { gs2352pTrapHostConfEntry 6 } gs2352pTrapHostConfSeverityLevel OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Severity Level. 0 : Emerg, 1 : Alert, 2 : Critical, 3 : Error, 4 : Warning, 5 : Notice, 6 : Info, 7 : Debug." ::= { gs2352pTrapHostConfEntry 7 } gs2352pTrapHostConfSecurityLevel OBJECT-TYPE SYNTAX INTEGER { noAuthNoPriv(1), authNoPriv(2), authPriv(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Security Level, NoAuthNoPriv, AuthNoPriv, and AuthPriv. 1 : NoAuthNoPriv, 2 : AuthNoPriv, 3 : AuthPriv. Privacy protocol will be configured as 'DES' automatically if security level is 3(AuthPriv)." ::= { gs2352pTrapHostConfEntry 8 } gs2352pTrapHostConfAuthPtc OBJECT-TYPE SYNTAX INTEGER { md5(1), sha(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication Protocol, there are SHA and MD5 supported presently. 1 : MD5, 2 : SHA." ::= { gs2352pTrapHostConfEntry 9 } gs2352pTrapHostConfAuthPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication Password, is used for authenticating. The return value is always '********'. If the authentication protocol is MD5, the length of password should be 8 ~ 32 characters. If the authentication protocol is SHA, the length of password should be 8 ~ 40 characters." ::= { gs2352pTrapHostConfEntry 10 } gs2352pTrapHostConfPrivPtc OBJECT-TYPE SYNTAX INTEGER { des(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the Privacy Protocol, which is used in AuthPriv. Only supports DES. An empty string will be returned if the security level is not 3(AuthPriv). 1 : DES." ::= { gs2352pTrapHostConfEntry 11 } gs2352pTrapHostConfPrivPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The password is Privacy Key. The return value is always '********'. This Key must be more than 8 characters, and less than 32 characters." ::= { gs2352pTrapHostConfEntry 12 } gs2352pTrapHostConfCurrentMode OBJECT-TYPE SYNTAX INTEGER { empty(0), active(1), edit(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "0:Empty, 1:Active mode, 2:Edit mode, 3:Delete." ::= { gs2352pTrapHostConfEntry 13 } gs2352pSnmpSystem OBJECT IDENTIFIER ::= { gs2352pSnmp 2 } gs2352pSnmpState OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the state of the SNMP. default : 1, 0: disable, 1: enable. " ::= { gs2352pSnmpSystem 1 } gs2352pSnmpEngineID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Engine ID of the SNMP. An SNMP engine's administratively-unique identifier." ::= { gs2352pSnmpSystem 2 } gs2352pSnmpCommunities OBJECT IDENTIFIER ::= { gs2352pSnmp 3 } gs2352pSnmpCommunitiesCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create entry" ::= { gs2352pSnmpCommunities 1 } gs2352pSnmpCommunitiesTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PSnmpCommunitiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create SNMPv1/v2 Communities entry." ::= { gs2352pSnmpCommunities 2 } gs2352pSnmpCommunitiesEntry OBJECT-TYPE SYNTAX GS2352PSnmpCommunitiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pSnmpCommunitiesIndex } ::= { gs2352pSnmpCommunitiesTable 1 } GS2352PSnmpCommunitiesEntry ::= SEQUENCE { gs2352pSnmpCommunitiesIndex Integer32, gs2352pSnmpCommunitiesCommunity DisplayString, gs2352pSnmpCommunitiesUserName DisplayString, gs2352pSnmpCommunitiesSourceIP IpAddress, gs2352pSnmpCommunitiesSourceMask IpAddress, gs2352pSnmpCommunitiesRowStatus INTEGER } gs2352pSnmpCommunitiesIndex OBJECT-TYPE SYNTAX Integer32(1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pSnmpCommunitiesEntry 1 } gs2352pSnmpCommunitiesCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 32 characters describing Community." ::= { gs2352pSnmpCommunitiesEntry 2 } gs2352pSnmpCommunitiesUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 32 characters describing User Name. " ::= { gs2352pSnmpCommunitiesEntry 3 } gs2352pSnmpCommunitiesSourceIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " SNMP access source ip. " ::= { gs2352pSnmpCommunitiesEntry 4 } gs2352pSnmpCommunitiesSourceMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " SNMP access source address mask. " ::= { gs2352pSnmpCommunitiesEntry 5 } gs2352pSnmpCommunitiesRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy 5: undo" ::= { gs2352pSnmpCommunitiesEntry 6 } gs2352pSnmpUsers OBJECT IDENTIFIER ::= { gs2352pSnmp 4 } gs2352pSnmpUsersCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create entry" ::= { gs2352pSnmpUsers 1 } gs2352pSnmpUsersTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PSnmpUsersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create SNMPv3 users entry." ::= { gs2352pSnmpUsers 2 } gs2352pSnmpUsersEntry OBJECT-TYPE SYNTAX GS2352PSnmpUsersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pSnmpUsersIndex } ::= { gs2352pSnmpUsersTable 1 } GS2352PSnmpUsersEntry ::= SEQUENCE { gs2352pSnmpUsersIndex Integer32, gs2352pSnmpUsersUserName DisplayString, gs2352pSnmpUsersSecurityLevel INTEGER, gs2352pSnmpUsersAuthenticationProtocol INTEGER, gs2352pSnmpUsersAuthenticationPassword DisplayString, gs2352pSnmpUsersPrivacyProtocol INTEGER, gs2352pSnmpUsersPrivacyPassword DisplayString, gs2352pSnmpUsersRowStatus INTEGER } gs2352pSnmpUsersIndex OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pSnmpUsersEntry 1 } gs2352pSnmpUsersUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 32 characters describing User Name." ::= { gs2352pSnmpUsersEntry 2 } gs2352pSnmpUsersSecurityLevel OBJECT-TYPE SYNTAX INTEGER { noauthnopriv(1), authnopriv(2), authpriv(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " 1: No authentication and no privacy. 2: Authentication and no privacy. 3: Authentication and privacy. " ::= { gs2352pSnmpUsersEntry 3 } gs2352pSnmpUsersAuthenticationProtocol OBJECT-TYPE SYNTAX INTEGER { none(0), md5(1), sha(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 0: None. 1: MD5. 2: SHA " ::= { gs2352pSnmpUsersEntry 4 } gs2352pSnmpUsersAuthenticationPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Authentication Password, is used for authenticating. The return value is always '********'. If the authentication protocol is MD5, the length of password should be 8 ~ 32 characters. If the authentication protocol is SHA, the length of password should be 8 ~ 40 characters. " ::= { gs2352pSnmpUsersEntry 5 } gs2352pSnmpUsersPrivacyProtocol OBJECT-TYPE SYNTAX INTEGER { none(0), des(1), aes(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 0: None. 1: DES. 2: AES This is the Privacy Protocol, which is used in AuthPriv. An empty string will be returned if the security level is not 3(AuthPriv) " ::= { gs2352pSnmpUsersEntry 6 } gs2352pSnmpUsersPrivacyPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " The password is Privacy Key. The return value is always '********'. This Key must be more than 8 characters, and less than 32 characters. " ::= { gs2352pSnmpUsersEntry 7 } gs2352pSnmpUsersRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy 5: undo" ::= { gs2352pSnmpUsersEntry 8 } gs2352pSnmpGroups OBJECT IDENTIFIER ::= { gs2352pSnmp 5 } gs2352pSnmpGroupsCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create entry" ::= { gs2352pSnmpGroups 1 } gs2352pSnmpGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PSnmpGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create SNMPv3 groups entry." ::= { gs2352pSnmpGroups 2 } gs2352pSnmpGroupsEntry OBJECT-TYPE SYNTAX GS2352PSnmpGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pSnmpGroupsIndex } ::= { gs2352pSnmpGroupsTable 1 } GS2352PSnmpGroupsEntry ::= SEQUENCE { gs2352pSnmpGroupsIndex Integer32, gs2352pSnmpGroupsSecurityModel INTEGER, gs2352pSnmpGroupsSecurityName DisplayString, gs2352pSnmpGroupsGroupName DisplayString, gs2352pSnmpGroupsRowStatus INTEGER } gs2352pSnmpGroupsIndex OBJECT-TYPE SYNTAX Integer32(1..14) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pSnmpGroupsEntry 1 } gs2352pSnmpGroupsSecurityModel OBJECT-TYPE SYNTAX INTEGER { v1(1), v2c(2), usm(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " 1: v1. 2: v2c. 3: usm." ::= { gs2352pSnmpGroupsEntry 2 } gs2352pSnmpGroupsSecurityName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 32 characters describing User Name." ::= { gs2352pSnmpGroupsEntry 3 } gs2352pSnmpGroupsGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 32 characters describing Group Name." ::= { gs2352pSnmpGroupsEntry 4 } gs2352pSnmpGroupsRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy 5: undo" ::= { gs2352pSnmpGroupsEntry 5 } gs2352pSnmpViews OBJECT IDENTIFIER ::= { gs2352pSnmp 6 } gs2352pSnmpViewsCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create entry" ::= { gs2352pSnmpViews 1 } gs2352pSnmpViewsTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PSnmpViewsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create SNMPv1/v2 Views entry." ::= { gs2352pSnmpViews 2 } gs2352pSnmpViewsEntry OBJECT-TYPE SYNTAX GS2352PSnmpViewsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pSnmpViewsIndex } ::= { gs2352pSnmpViewsTable 1 } GS2352PSnmpViewsEntry ::= SEQUENCE { gs2352pSnmpViewsIndex Integer32, gs2352pSnmpViewsName DisplayString, gs2352pSnmpViewsType INTEGER, gs2352pSnmpViewsOIDSubtree DisplayString, gs2352pSnmpViewsRowStatus INTEGER } gs2352pSnmpViewsIndex OBJECT-TYPE SYNTAX Integer32(1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pSnmpViewsEntry 1 } gs2352pSnmpViewsName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 32 characters describing view Name." ::= { gs2352pSnmpViewsEntry 2 } gs2352pSnmpViewsType OBJECT-TYPE SYNTAX INTEGER { included(1), excluded(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: included, An optional flag to indicate that this view subtree should be included. 2: excluded, An optional flag to indicate that this view subtree should be excluded." ::= { gs2352pSnmpViewsEntry 3 } gs2352pSnmpViewsOIDSubtree OBJECT-TYPE SYNTAX DisplayString (SIZE (1..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The OID defining the root of the subtree to add to the named view." ::= { gs2352pSnmpViewsEntry 4 } gs2352pSnmpViewsRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy 5: undo" ::= { gs2352pSnmpViewsEntry 5 } gs2352pSnmpAccess OBJECT IDENTIFIER ::= { gs2352pSnmp 7 } gs2352pSnmpAccessCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create entry" ::= { gs2352pSnmpAccess 1 } gs2352pSnmpAccessTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PSnmpAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create SNMPv3 Access entry." ::= { gs2352pSnmpAccess 2 } gs2352pSnmpAccessEntry OBJECT-TYPE SYNTAX GS2352PSnmpAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pSnmpAccessIndex } ::= { gs2352pSnmpAccessTable 1 } GS2352PSnmpAccessEntry ::= SEQUENCE { gs2352pSnmpAccessIndex Integer32, gs2352pSnmpAccessGroupName DisplayString, gs2352pSnmpAccessSecurityModel INTEGER, gs2352pSnmpAccessSecurityLevel INTEGER, gs2352pSnmpAccessReadViewName DisplayString, gs2352pSnmpAccessWriteViewName DisplayString, gs2352pSnmpAccessRowStatus INTEGER } gs2352pSnmpAccessIndex OBJECT-TYPE SYNTAX Integer32(1..14) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pSnmpAccessEntry 1 } gs2352pSnmpAccessGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 32 characters describing Group Name." ::= { gs2352pSnmpAccessEntry 2 } gs2352pSnmpAccessSecurityModel OBJECT-TYPE SYNTAX INTEGER { any(0), v1(1), v2c(2), usm(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " 0: any. 1: v1. 2: v2c. 3: usm." ::= { gs2352pSnmpAccessEntry 3 } gs2352pSnmpAccessSecurityLevel OBJECT-TYPE SYNTAX INTEGER { noauthnopriv(1), authnopriv(2), authpriv(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " 1: No authentication and no privacy. 2: Authentication and no privacy. 3: Authentication and privacy. " ::= { gs2352pSnmpAccessEntry 4 } gs2352pSnmpAccessReadViewName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 32 characters describing Read View Name. None is reserved for Empty." ::= { gs2352pSnmpAccessEntry 5 } gs2352pSnmpAccessWriteViewName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 32 characters describing Write View Name. None is reserved for Empty." ::= { gs2352pSnmpAccessEntry 6 } gs2352pSnmpAccessRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy 5: undo" ::= { gs2352pSnmpAccessEntry 7 } ---------------------------------------------------------------------------------------------------- gs2352pConfiguration OBJECT IDENTIFIER ::= { lancomGS2352P 2 } gs2352pPort OBJECT IDENTIFIER ::= { gs2352pConfiguration 1 } gs2352pPortConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PPortConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show port configurations. " ::= { gs2352pPort 1 } gs2352pPortConfigurationEntry OBJECT-TYPE SYNTAX GS2352PPortConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pPortConfPort } ::= { gs2352pPortConfigurationTable 1 } GS2352PPortConfigurationEntry ::= SEQUENCE { gs2352pPortConfPort Integer32, gs2352pPortConfPortMedia DisplayString, gs2352pPortConfLink DisplayString, gs2352pPortConfCurrentSpeed DisplayString, gs2352pPortConfSpeed INTEGER, gs2352pPortConfCurrentFlowControlRx INTEGER, gs2352pPortConfCurrentFlowControlTx INTEGER, gs2352pPortConfFlowControl INTEGER, gs2352pPortConfMaxFrameSize Integer32, gs2352pPortConfExcessiveCollisionMode INTEGER, gs2352pPortConfPowerControl INTEGER, gs2352pPortConfDescription DisplayString } gs2352pPortConfPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pPortConfigurationEntry 1 } gs2352pPortConfPortMedia OBJECT-TYPE SYNTAX DisplayString(SIZE (1..4)) MAX-ACCESS read-only STATUS current DESCRIPTION " Show port media. " ::= { gs2352pPortConfigurationEntry 2 } gs2352pPortConfLink OBJECT-TYPE SYNTAX DisplayString(SIZE (2..4)) MAX-ACCESS read-only STATUS current DESCRIPTION " The current link state. " ::= { gs2352pPortConfigurationEntry 3 } gs2352pPortConfCurrentSpeed OBJECT-TYPE SYNTAX DisplayString(SIZE (6..12)) MAX-ACCESS read-only STATUS current DESCRIPTION " The current link speed of the port. " ::= { gs2352pPortConfigurationEntry 4 } gs2352pPortConfSpeed OBJECT-TYPE SYNTAX INTEGER { disable(0), auto(1), speed10Half(2), speed10Full(3), speed100Half(4), speed100Full(5), speed1Gfull(6), sfpAutoAMS(7), speed100FXAMS(8), speed1000XAMS(9), speed100FX(10), speed1000X(11), speed10GFull(12) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1, 0: disable state, 1: auto, 2: 10 Half, 3: 10 Full, 4: 100 Half, 5: 100 Full, 6: 1G full, only 'Dual Media' port have 7-11 option. Dual Media port default: 7, 7: SFP_Auto_AMS, 8: 100FX_AMS, 9: 1000X_AMS, 10: 100FX, 11: 1000X, 12: 10G Full. " ::= { gs2352pPortConfigurationEntry 5 } gs2352pPortConfCurrentFlowControlRx OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), noSupport(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "0: disable 1: enable 2: no support. " ::= { gs2352pPortConfigurationEntry 6 } gs2352pPortConfCurrentFlowControlTx OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), noSupport(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "0: disable 1: enable 2: no support. " ::= { gs2352pPortConfigurationEntry 7 } gs2352pPortConfFlowControl OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), noSupport(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0: disable 1: enable 2: no support. " ::= { gs2352pPortConfigurationEntry 8 } gs2352pPortConfMaxFrameSize OBJECT-TYPE SYNTAX Integer32 (1518..9600) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 9600 , range : 1518 - 9600 " ::= { gs2352pPortConfigurationEntry 9 } gs2352pPortConfExcessiveCollisionMode OBJECT-TYPE SYNTAX INTEGER { discard(0), restart(1), noSupport(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, Excessive Collision Mode : 0: Discard, 1: Restart, 2: no support. " ::= { gs2352pPortConfigurationEntry 10 } gs2352pPortConfPowerControl OBJECT-TYPE SYNTAX INTEGER { disable(0), actiphy(1), dynamic(2), enable(3), noSupport(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, PowerControl : 0: disable, 1: Actiphy, 2: Dynamic (perfectReach), 3: Enable, 4: no support. " ::= { gs2352pPortConfigurationEntry 11 } gs2352pPortConfDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Interface specific description. Up to 47 characters describing this interface. " ::= { gs2352pPortConfigurationEntry 12 } gs2352pPortTrafficStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PPortTrafficStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pPort 2 } gs2352pPortTrafficStatisticsEntry OBJECT-TYPE SYNTAX GS2352PPortTrafficStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pPortTrafficStatisticsPort } ::= { gs2352pPortTrafficStatisticsTable 1 } GS2352PPortTrafficStatisticsEntry ::= SEQUENCE { gs2352pPortTrafficStatisticsPort Integer32, gs2352pPortTrafficStatisticsClear INTEGER, gs2352pPortTrafficRxPackets Counter64, gs2352pPortTrafficRxOctets Counter64, gs2352pPortTrafficRxUnicast Counter64, gs2352pPortTrafficRxMulticast Counter64, gs2352pPortTrafficRxBroadcast Counter64, gs2352pPortTrafficRxPause Counter64, gs2352pPortTrafficRx64Bytes Counter64, gs2352pPortTrafficRx65to127Bytes Counter64, gs2352pPortTrafficRx128to255Bytes Counter64, gs2352pPortTrafficRx256to511Bytes Counter64, gs2352pPortTrafficRx512to1023Bytes Counter64, gs2352pPortTrafficRx1024to1526Bytes Counter64, gs2352pPortTrafficRxExceecd1527Bytes Counter64, gs2352pPortTrafficRxQ0 Counter64, gs2352pPortTrafficRxQ1 Counter64, gs2352pPortTrafficRxQ2 Counter64, gs2352pPortTrafficRxQ3 Counter64, gs2352pPortTrafficRxQ4 Counter64, gs2352pPortTrafficRxQ5 Counter64, gs2352pPortTrafficRxQ6 Counter64, gs2352pPortTrafficRxQ7 Counter64, gs2352pPortTrafficRxDrops Counter64, gs2352pPortTrafficRxCRCorAlignment Counter64, gs2352pPortTrafficRxUndersize Counter64, gs2352pPortTrafficRxOversize Counter64, gs2352pPortTrafficRxFragments Counter64, gs2352pPortTrafficRxJabber Counter64, gs2352pPortTrafficRxFiltered Counter64, gs2352pPortTrafficTxPackets Counter64, gs2352pPortTrafficTxOctets Counter64, gs2352pPortTrafficTxUnicast Counter64, gs2352pPortTrafficTxMulticast Counter64, gs2352pPortTrafficTxBroadcast Counter64, gs2352pPortTrafficTxPause Counter64, gs2352pPortTrafficTx64Bytes Counter64, gs2352pPortTrafficTx65to127Bytes Counter64, gs2352pPortTrafficTx128to255Bytes Counter64, gs2352pPortTrafficTx256to511Bytes Counter64, gs2352pPortTrafficTx512to1023Bytes Counter64, gs2352pPortTrafficTx1024to1526Bytes Counter64, gs2352pPortTrafficTxExceecd1527Bytes Counter64, gs2352pPortTrafficTxQ0 Counter64, gs2352pPortTrafficTxQ1 Counter64, gs2352pPortTrafficTxQ2 Counter64, gs2352pPortTrafficTxQ3 Counter64, gs2352pPortTrafficTxQ4 Counter64, gs2352pPortTrafficTxQ5 Counter64, gs2352pPortTrafficTxQ6 Counter64, gs2352pPortTrafficTxQ7 Counter64, gs2352pPortTrafficTxDrops Counter64, gs2352pPortTrafficTxLateOrExcColl Counter64 } gs2352pPortTrafficStatisticsPort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 1 } gs2352pPortTrafficStatisticsClear OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 2 } gs2352pPortTrafficRxPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 3 } gs2352pPortTrafficRxOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 4 } gs2352pPortTrafficRxUnicast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 5 } gs2352pPortTrafficRxMulticast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 6 } gs2352pPortTrafficRxBroadcast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 7 } gs2352pPortTrafficRxPause OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 8 } gs2352pPortTrafficRx64Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 9 } gs2352pPortTrafficRx65to127Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 10 } gs2352pPortTrafficRx128to255Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 11 } gs2352pPortTrafficRx256to511Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 12 } gs2352pPortTrafficRx512to1023Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 13 } gs2352pPortTrafficRx1024to1526Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 14 } gs2352pPortTrafficRxExceecd1527Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 15 } gs2352pPortTrafficRxQ0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 16 } gs2352pPortTrafficRxQ1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 17 } gs2352pPortTrafficRxQ2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 18 } gs2352pPortTrafficRxQ3 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 19 } gs2352pPortTrafficRxQ4 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 20 } gs2352pPortTrafficRxQ5 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 21 } gs2352pPortTrafficRxQ6 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 22 } gs2352pPortTrafficRxQ7 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 23 } gs2352pPortTrafficRxDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 24 } gs2352pPortTrafficRxCRCorAlignment OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 25 } gs2352pPortTrafficRxUndersize OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 26 } gs2352pPortTrafficRxOversize OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 27 } gs2352pPortTrafficRxFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 28 } gs2352pPortTrafficRxJabber OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 29 } gs2352pPortTrafficRxFiltered OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 30 } gs2352pPortTrafficTxPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 31 } gs2352pPortTrafficTxOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 32 } gs2352pPortTrafficTxUnicast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 33 } gs2352pPortTrafficTxMulticast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 34 } gs2352pPortTrafficTxBroadcast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 35 } gs2352pPortTrafficTxPause OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 36 } gs2352pPortTrafficTx64Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 37 } gs2352pPortTrafficTx65to127Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 38 } gs2352pPortTrafficTx128to255Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 39 } gs2352pPortTrafficTx256to511Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 40 } gs2352pPortTrafficTx512to1023Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 41 } gs2352pPortTrafficTx1024to1526Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 42 } gs2352pPortTrafficTxExceecd1527Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 43 } gs2352pPortTrafficTxQ0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 44 } gs2352pPortTrafficTxQ1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 45 } gs2352pPortTrafficTxQ2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 46 } gs2352pPortTrafficTxQ3 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 47 } gs2352pPortTrafficTxQ4 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 48 } gs2352pPortTrafficTxQ5 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 49 } gs2352pPortTrafficTxQ6 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 50 } gs2352pPortTrafficTxQ7 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 51 } gs2352pPortTrafficTxDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 52 } gs2352pPortTrafficTxLateOrExcColl OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortTrafficStatisticsEntry 53 } gs2352pPortQoSStatistics OBJECT IDENTIFIER ::= { gs2352pPort 3 } gs2352pPortQoSStatisticsClear OBJECT-TYPE SYNTAX INTEGER { none(0), clear(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "default: 0 0: none 1: clear " ::= { gs2352pPortQoSStatistics 1 } gs2352pPortQoSStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PPortQoSStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pPortQoSStatistics 2 } gs2352pPortQoSStatisticsEntry OBJECT-TYPE SYNTAX GS2352PPortQoSStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pPortQoSStatisticsPort } ::= { gs2352pPortQoSStatisticsTable 1 } GS2352PPortQoSStatisticsEntry ::= SEQUENCE { gs2352pPortQoSStatisticsPort Integer32, gs2352pPortQoSQ0Rx Counter64, gs2352pPortQoSQ0Tx Counter64, gs2352pPortQoSQ1Rx Counter64, gs2352pPortQoSQ1Tx Counter64, gs2352pPortQoSQ2Rx Counter64, gs2352pPortQoSQ2Tx Counter64, gs2352pPortQoSQ3Rx Counter64, gs2352pPortQoSQ3Tx Counter64, gs2352pPortQoSQ4Rx Counter64, gs2352pPortQoSQ4Tx Counter64, gs2352pPortQoSQ5Rx Counter64, gs2352pPortQoSQ5Tx Counter64, gs2352pPortQoSQ6Rx Counter64, gs2352pPortQoSQ6Tx Counter64, gs2352pPortQoSQ7Rx Counter64, gs2352pPortQoSQ7Tx Counter64 } gs2352pPortQoSStatisticsPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pPortQoSStatisticsEntry 1 } gs2352pPortQoSQ0Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortQoSStatisticsEntry 2 } gs2352pPortQoSQ0Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortQoSStatisticsEntry 3 } gs2352pPortQoSQ1Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortQoSStatisticsEntry 4 } gs2352pPortQoSQ1Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortQoSStatisticsEntry 5 } gs2352pPortQoSQ2Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortQoSStatisticsEntry 6 } gs2352pPortQoSQ2Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortQoSStatisticsEntry 7 } gs2352pPortQoSQ3Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortQoSStatisticsEntry 8 } gs2352pPortQoSQ3Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortQoSStatisticsEntry 9 } gs2352pPortQoSQ4Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortQoSStatisticsEntry 10 } gs2352pPortQoSQ4Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortQoSStatisticsEntry 11 } gs2352pPortQoSQ5Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortQoSStatisticsEntry 12 } gs2352pPortQoSQ5Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortQoSStatisticsEntry 13 } gs2352pPortQoSQ6Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortQoSStatisticsEntry 14 } gs2352pPortQoSQ6Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortQoSStatisticsEntry 15 } gs2352pPortQoSQ7Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortQoSStatisticsEntry 16 } gs2352pPortQoSQ7Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortQoSStatisticsEntry 17 } gs2352pSFPInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PSFPInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pPort 4 } gs2352pSFPInfoEntry OBJECT-TYPE SYNTAX GS2352PSFPInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pSFPInfoIndex } ::= { gs2352pSFPInfoTable 1 } GS2352PSFPInfoEntry ::= SEQUENCE { gs2352pSFPInfoIndex Integer32, gs2352pSFPInfoPort DisplayString, gs2352pSFPConnectorType DisplayString, gs2352pSFPFiberType DisplayString, gs2352pSFPTxCentralWavelength DisplayString, gs2352pSFPBaudRate DisplayString, gs2352pSFPVendorOUI DisplayString, gs2352pSFPVendorName DisplayString, gs2352pSFPVendorPN DisplayString, gs2352pSFPVendorRev DisplayString, gs2352pSFPVendorSN DisplayString, gs2352pSFPDateCode DisplayString, gs2352pSFPTemperature DisplayString, gs2352pSFPVcc DisplayString, gs2352pSFPMon1Bias DisplayString, gs2352pSFPMon2TxPWR DisplayString, gs2352pSFPMon3RxPWR DisplayString } gs2352pSFPInfoIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pSFPInfoEntry 1 } gs2352pSFPInfoPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSFPInfoEntry 2 } gs2352pSFPConnectorType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSFPInfoEntry 3 } gs2352pSFPFiberType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSFPInfoEntry 4 } gs2352pSFPTxCentralWavelength OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSFPInfoEntry 5 } gs2352pSFPBaudRate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSFPInfoEntry 6 } gs2352pSFPVendorOUI OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSFPInfoEntry 7 } gs2352pSFPVendorName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSFPInfoEntry 8 } gs2352pSFPVendorPN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSFPInfoEntry 9 } gs2352pSFPVendorRev OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSFPInfoEntry 10 } gs2352pSFPVendorSN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSFPInfoEntry 11 } gs2352pSFPDateCode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSFPInfoEntry 12 } gs2352pSFPTemperature OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSFPInfoEntry 13 } gs2352pSFPVcc OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSFPInfoEntry 14 } gs2352pSFPMon1Bias OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSFPInfoEntry 15 } gs2352pSFPMon2TxPWR OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSFPInfoEntry 16 } gs2352pSFPMon3RxPWR OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pSFPInfoEntry 17 } gs2352pVoiceVLAN OBJECT IDENTIFIER ::= { gs2352pConfiguration 2 } gs2352pVoiceVLANConf OBJECT IDENTIFIER ::= { gs2352pVoiceVLAN 1 } gs2352pVoiceVLANMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Voice VLAN mode operation. default: 0, 0: disable 1: enable" ::= { gs2352pVoiceVLANConf 1 } gs2352pVoiceVLANVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Voice VLAN ID. default: 1000, range : 1-4094. " ::= { gs2352pVoiceVLANConf 2 } gs2352pVoiceVLANAgingTime OBJECT-TYPE SYNTAX Integer32(10..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Voice VLAN secure learning aging time. default: 86400, range : 10 - 10000000. " ::= { gs2352pVoiceVLANConf 3 } gs2352pVoiceVLANTrafficClass OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " Voice VLAN traffic class, all traffic on the Voice VLAN will apply this class, available value is from 0(Low) to 7(High). default: 7. " ::= { gs2352pVoiceVLANConf 4 } gs2352pVoiceVLANPortTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PVoiceVLANPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show Voice Vlan configuration. " ::= { gs2352pVoiceVLANConf 5 } gs2352pVoiceVLANPortEntry OBJECT-TYPE SYNTAX GS2352PVoiceVLANPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pVoiceVLANPort } ::= { gs2352pVoiceVLANPortTable 1 } GS2352PVoiceVLANPortEntry ::= SEQUENCE { gs2352pVoiceVLANPort Integer32, gs2352pVoiceVLANPortMode INTEGER, gs2352pVoiceVLANPortSecurity INTEGER, gs2352pVoiceVLANPortDiscoveryProtocol INTEGER } gs2352pVoiceVLANPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pVoiceVLANPortEntry 1 } gs2352pVoiceVLANPortMode OBJECT-TYPE SYNTAX INTEGER { disable(0), auto(1), forced(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Voice VLAN port mode. default: 0, 0: Disable (Disjoin from Voice VLAN.) 1: Auto (Enable auto detect mode. It detects whether there is VoIP phone attached to the specific port and configures the Voice VLAN members automatically.) 2: Forced (Force join to Voice VLAN.)" ::= { gs2352pVoiceVLANPortEntry 2 } gs2352pVoiceVLANPortSecurity OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Voice VLAN port security mode. default: 0, 0: Disable (Disjoin from Voice VLAN.) 1: enable ( Enable Voice VLAN security mode. When the function is enabled, all non-telephone MAC address in Voice VLAN will be blocked 10 seconds.)" ::= { gs2352pVoiceVLANPortEntry 3 } gs2352pVoiceVLANPortDiscoveryProtocol OBJECT-TYPE SYNTAX INTEGER { oui(0), lldp(1), both(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Voice VLAN port discovery protocol. default: 0 0: OUI (Detect telephony device by OUI address.) 1: LLDP (Detect telephony device by LLDP.) 2: Both (Both OUI and LLDP.) " ::= { gs2352pVoiceVLANPortEntry 4 } gs2352pVoiceVLANOUI OBJECT IDENTIFIER ::= { gs2352pVoiceVLAN 2 } gs2352pVoiceVLANOUICreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create an OUI entry" ::= { gs2352pVoiceVLANOUI 1 } gs2352pVoiceVLANOUITable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PVoiceVLANOUIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create Voice VLAN OUI entry. Modify OUI table will restart auto detect OUI process. " ::= { gs2352pVoiceVLANOUI 2 } gs2352pVoiceVLANOUIEntry OBJECT-TYPE SYNTAX GS2352PVoiceVLANOUIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pVoiceVLANOUIIndex } ::= { gs2352pVoiceVLANOUITable 1 } GS2352PVoiceVLANOUIEntry ::= SEQUENCE { gs2352pVoiceVLANOUIIndex Integer32, gs2352pVoiceVLANTelephonyOUI OCTET STRING, gs2352pVoiceVLANDescription DisplayString, gs2352pVoiceVLANOUIRowStatus INTEGER } gs2352pVoiceVLANOUIIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pVoiceVLANOUIEntry 1 } gs2352pVoiceVLANTelephonyOUI OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "OUI address, format : 0a 1b 2c " ::= { gs2352pVoiceVLANOUIEntry 2 } gs2352pVoiceVLANDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 32 characters describing OUI address. " ::= { gs2352pVoiceVLANOUIEntry 3 } gs2352pVoiceVLANOUIRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy 5: undo" ::= { gs2352pVoiceVLANOUIEntry 4 } gs2352pGARP OBJECT IDENTIFIER ::= { gs2352pConfiguration 3 } gs2352pGARPConfTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PGARPConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pGARP 1 } gs2352pGARPConfEntry OBJECT-TYPE SYNTAX GS2352PGARPConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pGARPConfPort } ::= { gs2352pGARPConfTable 1 } GS2352PGARPConfEntry ::= SEQUENCE { gs2352pGARPConfPort Integer32, gs2352pGARPJoinTimer Integer32, gs2352pGARPLeaveTimer Integer32, gs2352pGARPLeaveAllTimer Integer32, gs2352pGARPApplicantion INTEGER, gs2352pGARPAttributeType INTEGER, gs2352pGARPApplicant INTEGER } gs2352pGARPConfPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pGARPConfEntry 1 } gs2352pGARPJoinTimer OBJECT-TYPE SYNTAX Integer32(200..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 200, range : 200 - 1000 " ::= { gs2352pGARPConfEntry 2 } gs2352pGARPLeaveTimer OBJECT-TYPE SYNTAX Integer32(600..3000) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 600 , range : 600 - 3000" ::= { gs2352pGARPConfEntry 3 } gs2352pGARPLeaveAllTimer OBJECT-TYPE SYNTAX Integer32(10000..50000) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 10000, range : 10000 - 50000 " ::= { gs2352pGARPConfEntry 4 } gs2352pGARPApplicantion OBJECT-TYPE SYNTAX INTEGER { gvrp(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 1: GVRP" ::= { gs2352pGARPConfEntry 5 } gs2352pGARPAttributeType OBJECT-TYPE SYNTAX INTEGER { vlan(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 1: VLAN" ::= { gs2352pGARPConfEntry 6 } gs2352pGARPApplicant OBJECT-TYPE SYNTAX INTEGER { participant(0), nonParticipant(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: normal-participant 1: non-participant" ::= { gs2352pGARPConfEntry 7 } gs2352pGARPStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PGARPStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show the basic GARP port statistics. " ::= { gs2352pGARP 2 } gs2352pGARPStatisticsEntry OBJECT-TYPE SYNTAX GS2352PGARPStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pGARPStatisticsPort } ::= { gs2352pGARPStatisticsTable 1 } GS2352PGARPStatisticsEntry ::= SEQUENCE { gs2352pGARPStatisticsPort Integer32, gs2352pGARPStatisticsPeerMAC DisplayString, gs2352pGARPStatisticsFailedCount Counter32 } gs2352pGARPStatisticsPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pGARPStatisticsEntry 1 } gs2352pGARPStatisticsPeerMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Peer MAC is MAC address of the neighbour Switch from with GARP frame is received. " ::= { gs2352pGARPStatisticsEntry 2 } gs2352pGARPStatisticsFailedCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " explain Failed count here. " ::= { gs2352pGARPStatisticsEntry 3 } gs2352pGVRP OBJECT IDENTIFIER ::= { gs2352pConfiguration 4 } gs2352pGVRPConf OBJECT IDENTIFIER ::= { gs2352pGVRP 1 } gs2352pGVRPMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0: disable, 1: enable. " ::= { gs2352pGVRPConf 1 } gs2352pGVRPConfTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PGVRPConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pGVRPConf 2 } gs2352pGVRPConfEntry OBJECT-TYPE SYNTAX GS2352PGVRPConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pGVRPConfPort } ::= { gs2352pGVRPConfTable 1 } GS2352PGVRPConfEntry ::= SEQUENCE { gs2352pGVRPConfPort Integer32, gs2352pGVRPConfPortMode INTEGER, gs2352pGVRPConfPortRRole INTEGER } gs2352pGVRPConfPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pGVRPConfEntry 1 } gs2352pGVRPConfPortMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 1: enable 0: disable" ::= { gs2352pGVRPConfEntry 2 } gs2352pGVRPConfPortRRole OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 1: enable 0: disable" ::= { gs2352pGVRPConfEntry 3 } gs2352pGVRPStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PGVRPStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pGVRP 2 } gs2352pGVRPStatisticsEntry OBJECT-TYPE SYNTAX GS2352PGVRPStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pGVRPStatisticsPort } ::= { gs2352pGVRPStatisticsTable 1 } GS2352PGVRPStatisticsEntry ::= SEQUENCE { gs2352pGVRPStatisticsPort Integer32, gs2352pGVRPStatisticsJoinTxCnt Counter32, gs2352pGVRPStatisticsLeaveTxCnt Counter32 } gs2352pGVRPStatisticsPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pGVRPStatisticsEntry 1 } gs2352pGVRPStatisticsJoinTxCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pGVRPStatisticsEntry 2 } gs2352pGVRPStatisticsLeaveTxCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pGVRPStatisticsEntry 3 } gs2352pMirroring OBJECT IDENTIFIER ::= { gs2352pConfiguration 6 } gs2352pPortToMirrorOn OBJECT-TYPE SYNTAX Integer32(0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable, range : 1 - port number. " ::= { gs2352pMirroring 1 } gs2352pMirrorTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PMirrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pMirroring 2 } gs2352pMirrorEntry OBJECT-TYPE SYNTAX GS2352PMirrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pMirrorPort } ::= { gs2352pMirrorTable 1 } GS2352PMirrorEntry ::= SEQUENCE { gs2352pMirrorPort Integer32, gs2352pMirrorMode INTEGER } gs2352pMirrorPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pMirrorEntry 1 } gs2352pMirrorMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), rxOnly(2), txOnly(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable 2: rx only 3: tx only Setting Tx mirroring for analyzer port has no effect. Tx mirroring ignored" ::= { gs2352pMirrorEntry 2 } gs2352pTrapEventSeverity OBJECT IDENTIFIER ::= { gs2352pConfiguration 7 } gs2352pTrapEventSeverityACL OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 1 } gs2352pTrapEventSeverityACLLog OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 7(Debug) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 2 } gs2352pTrapEventSeverityAccessMgmt OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 3 } gs2352pTrapEventSeverityAuthFailed OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 4 } gs2352pTrapEventSeverityColdStart OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 5 } gs2352pTrapEventSeverityConfigInfo OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 6 } gs2352pTrapEventSeverityFirmwareUpgrade OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 7 } gs2352pTrapEventSeverityImportExport OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 8 } gs2352pTrapEventSeverityLACP OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 9 } gs2352pTrapEventSeverityLinkStatus OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 10 } gs2352pTrapEventSeverityLogin OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 11 } gs2352pTrapEventSeverityLogout OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 12 } gs2352pTrapEventSeverityLoopProtect OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 13 } gs2352pTrapEventSeverityMgmtIPChange OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 14 } gs2352pTrapEventSeverityModuleChange OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 5(Notice) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 15 } gs2352pTrapEventSeverityNAS OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 16 } gs2352pTrapEventSeverityPasswordChange OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 17 } gs2352pTrapEventSeverityPortSecurity OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 18 } gs2352pTrapEventSeverityVLAN OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 20 } gs2352pTrapEventSeverityWarmStart OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 21 } gs2352pTrapEventSeverityPoEAutoCheck OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 22 } gs2352pTrapEventSeverityARPConflict OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 25 } gs2352pTrapEventSeveritySpoofingLimit OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 27 } gs2352pTrapEventSeverityStaticARPConflict OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pTrapEventSeverity 28 } gs2352pSMTP OBJECT IDENTIFIER ::= { gs2352pConfiguration 8 } gs2352pSMTPMailServer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing email server. " ::= { gs2352pSMTP 1 } gs2352pSMTPUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing user name. " ::= { gs2352pSMTP 2 } gs2352pSMTPPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing password. " ::= { gs2352pSMTP 3 } gs2352pSMTPServeriryLevel OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 6 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2352pSMTP 4 } gs2352pSMTPSender OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing sender. " ::= { gs2352pSMTP 5 } gs2352pSMTPReturnPath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing return path. " ::= { gs2352pSMTP 6 } gs2352pSMTPEmailAddress1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing mail address. " ::= { gs2352pSMTP 7 } gs2352pSMTPEmailAddress2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing mail address. " ::= { gs2352pSMTP 8 } gs2352pSMTPEmailAddress3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing mail address. " ::= { gs2352pSMTP 9 } gs2352pSMTPEmailAddress4 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing mail address. " ::= { gs2352pSMTP 10 } gs2352pSMTPEmailAddress5 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing mail address. " ::= { gs2352pSMTP 11 } gs2352pSMTPEmailAddress6 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing mail address. " ::= { gs2352pSMTP 12 } gs2352pACL OBJECT IDENTIFIER ::= { gs2352pConfiguration 9 } gs2352pACLPortsConfTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PACLPortsConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pACL 1 } gs2352pACLPortsConfEntry OBJECT-TYPE SYNTAX GS2352PACLPortsConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pACLPortsConfPort } ::= { gs2352pACLPortsConfTable 1 } GS2352PACLPortsConfEntry ::= SEQUENCE { gs2352pACLPortsConfPort Integer32, gs2352pACLPortsConfPolicyID Integer32, gs2352pACLPortsConfAction INTEGER, gs2352pACLPortsConfRateLimiterID Integer32, gs2352pACLPortsConfPortRedirect Integer32, gs2352pACLPortsConfLogging INTEGER, gs2352pACLPortsConfShutdown INTEGER, gs2352pACLPortsConfState INTEGER, gs2352pACLPortsConfCounter Counter32 } gs2352pACLPortsConfPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pACLPortsConfEntry 1 } gs2352pACLPortsConfPolicyID OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, range : 0 - 255 " ::= { gs2352pACLPortsConfEntry 2 } gs2352pACLPortsConfAction OBJECT-TYPE SYNTAX INTEGER { deny(0), permit(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1, 0: Deny 1: Permit" ::= { gs2352pACLPortsConfEntry 3 } gs2352pACLPortsConfRateLimiterID OBJECT-TYPE SYNTAX Integer32(0..12) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0: Disable range : 0 - 12 " ::= { gs2352pACLPortsConfEntry 4 } gs2352pACLPortsConfPortRedirect OBJECT-TYPE SYNTAX Integer32(0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: Disable range : 0 - end port number " ::= { gs2352pACLPortsConfEntry 5 } gs2352pACLPortsConfLogging OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: Disable 1: Enable " ::= { gs2352pACLPortsConfEntry 7 } gs2352pACLPortsConfShutdown OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: Disable 1: Enable " ::= { gs2352pACLPortsConfEntry 8 } gs2352pACLPortsConfState OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: Disable 1: Enable " ::= { gs2352pACLPortsConfEntry 9 } gs2352pACLPortsConfCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of frames that match this ACE. " ::= { gs2352pACLPortsConfEntry 10 } gs2352pACLRateLimiterTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PACLRateLimiterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pACL 2 } gs2352pACLRateLimiterEntry OBJECT-TYPE SYNTAX GS2352PACLRateLimiterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pACLRateLimiterID } ::= { gs2352pACLRateLimiterTable 1 } GS2352PACLRateLimiterEntry ::= SEQUENCE { gs2352pACLRateLimiterID Integer32, gs2352pACLRateLimiterRate Integer32 } gs2352pACLRateLimiterID OBJECT-TYPE SYNTAX Integer32(1..12) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Rate Limiter ID. range : 1-12 " ::= { gs2352pACLRateLimiterEntry 1 } gs2352pACLRateLimiterRate OBJECT-TYPE SYNTAX Integer32(0..3276700) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1, range : <0-3276700> pps " ::= { gs2352pACLRateLimiterEntry 3 } gs2352pACLACE OBJECT IDENTIFIER ::= { gs2352pACL 3 } gs2352pACLACECreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create an ACE entry" ::= { gs2352pACLACE 1 } gs2352pACLACETable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PACLACEEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create ACL ACE entry. " ::= { gs2352pACLACE 2 } gs2352pACLACEEntry OBJECT-TYPE SYNTAX GS2352PACLACEEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pACLACEIndex } ::= { gs2352pACLACETable 1 } GS2352PACLACEEntry ::= SEQUENCE { gs2352pACLACEIndex Integer32, gs2352pACLACEID Integer32, gs2352pACLACENextID Integer32, gs2352pACLACEIngressPort DisplayString, gs2352pACLACEPortPolicyNumber Integer32, gs2352pACLACEPortPolicyBitmask Integer32, gs2352pACLACEFrameType INTEGER, gs2352pACLACEAction INTEGER, gs2352pACLACEDenyPortRedirect DisplayString, gs2352pACLACELogging INTEGER, gs2352pACLACERateLimiter Integer32, gs2352pACLACEShutdown INTEGER, gs2352pACLACEVLANTagPriority Integer32, gs2352pACLACEVLANVID Integer32, gs2352pACLACEEtherType Integer32, gs2352pACLACESMAC DisplayString, gs2352pACLACEDMACType INTEGER, gs2352pACLACEDMAC DisplayString, gs2352pACLACEArpOpcode INTEGER, gs2352pACLACEArpFlagsRequestReply INTEGER, gs2352pACLACEArpFlagsArpSmac INTEGER, gs2352pACLACEArpFlagsRarpDmac INTEGER, gs2352pACLACEArpFlagsLength INTEGER, gs2352pACLACEArpFlagsIp INTEGER, gs2352pACLACEArpFlagsEthernet INTEGER, gs2352pACLACESIPType INTEGER, gs2352pACLACESIPIPAddress IpAddress, gs2352pACLACESIPNetworkPrefix Integer32, gs2352pACLACEDIPType INTEGER, gs2352pACLACEDIPIPAddress IpAddress, gs2352pACLACEDIPNetworkPrefix Integer32, gs2352pACLACEIPProtocol Integer32, gs2352pACLACEIPFlagsTTL INTEGER, gs2352pACLACEIPFlagsOptions INTEGER, gs2352pACLACEIPFlagsFragment INTEGER, gs2352pACLACEICMPType Integer32, gs2352pACLACEICMPCode Integer32, gs2352pACLACESourcePortMin Integer32, gs2352pACLACESourcePortMax Integer32, gs2352pACLACEDestPortMin Integer32, gs2352pACLACEDestPortMax Integer32, gs2352pACLACETCPFlagsFin INTEGER, gs2352pACLACETCPFlagsSyn INTEGER, gs2352pACLACETCPFlagsRst INTEGER, gs2352pACLACETCPFlagsPsh INTEGER, gs2352pACLACETCPFlagsAck INTEGER, gs2352pACLACETCPFlagsUrg INTEGER, gs2352pACLACERowStatus INTEGER } gs2352pACLACEIndex OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pACLACEEntry 1 } gs2352pACLACEID OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS read-write STATUS current DESCRIPTION " If the ACE ID is specified and an entry with this ACE ID already exists, the ACE will be modified. Otherwise, a new ACE will be added. range : 1 - 256. " ::= { gs2352pACLACEEntry 2 } gs2352pACLACENextID OBJECT-TYPE SYNTAX Integer32(0..256) MAX-ACCESS read-write STATUS current DESCRIPTION " If the next ACE ID is non zero, the ACE will be placed before this ACE in the list. If the next ACE ID is zero, the ACE will be placed last in the list. range : 0 - 256. " ::= { gs2352pACLACEEntry 3 } gs2352pACLACEIngressPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the ingress port of the ACE. Possible values are: All: The ACE will match all ingress port. Port: The ACE will match a specific ingress port.Format: 1,3,6." ::= { gs2352pACLACEEntry 4 } gs2352pACLACEPortPolicyNumber OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " policy value. range : 0 - 255. " ::= { gs2352pACLACEEntry 5 } gs2352pACLACEPortPolicyBitmask OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " policy bitmask. range : 0 - 255(0xff). " ::= { gs2352pACLACEEntry 6 } gs2352pACLACEFrameType OBJECT-TYPE SYNTAX INTEGER { any(0), arp(1), etype(2), icmp(3), ipv4(4), tcp(5), udp(6) } MAX-ACCESS read-write STATUS current DESCRIPTION " 0: any, 1: arp, 2: etype, 3: icmp, 4: ipv4, 5: tcp, 6: udp." ::= { gs2352pACLACEEntry 7 } gs2352pACLACEAction OBJECT-TYPE SYNTAX INTEGER { deny(0), permit(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1, 0: Deny 1: Permit" ::= { gs2352pACLACEEntry 8 } gs2352pACLACEDenyPortRedirect OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Frames that hit the ACE are redirected to the port number specified here. Disabled: indicates that the port redirect operation is disabled. Port Format: 1,3,6." ::= { gs2352pACLACEEntry 9 } gs2352pACLACELogging OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0: disable - Frames matching the ACE are not logged. 1: enable - Frames matching the ACE are stored in the system log." ::= { gs2352pACLACEEntry 10 } gs2352pACLACERateLimiter OBJECT-TYPE SYNTAX Integer32(0..12) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0: Disable range : 0 - 12 " ::= { gs2352pACLACEEntry 12 } gs2352pACLACEShutdown OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0: disable - Port shut down is disabled for the AC. 1: enable - If a frame matches the ACE, the ingress port will be disabled." ::= { gs2352pACLACEEntry 13 } gs2352pACLACEVLANTagPriority OBJECT-TYPE SYNTAX Integer32(0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the tag priority for this ACE. The tag priority can't be set when 802.1Q Tagged is disabled default: 8, 8: Any, range : 0 - 8 " ::= { gs2352pACLACEEntry 15 } gs2352pACLACEVLANVID OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the VLAN ID filter for this ACE. The vid can't be set when 802.1Q Tagged is disabled. default: 0, 0: Any - No VLAN ID filter is specified. range : 0 - 4094 " ::= { gs2352pACLACEEntry 16 } gs2352pACLACEEtherType OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " 0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6). range : 0 or 1536(0x0600)- 65535(0xffff). " ::= { gs2352pACLACEEntry 17 } gs2352pACLACESMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Configure source MAC address for this ACE. : A frame that hits this ACE matches this source MAC address value. Any: Don't care." ::= { gs2352pACLACEEntry 18 } gs2352pACLACEDMACType OBJECT-TYPE SYNTAX INTEGER { any(0), broadcast(1), unicast(2), multicast(3) , macaddress(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "DMAC Type. default: 0, 0: Any - Don't care. 1: Broadcast - Frame must be broadcast. 2: Unicast - Frame must be unicast. 3: Multicast - Frame must be multicast. 4: mac address range : 0 - 4 " ::= { gs2352pACLACEEntry 19 } gs2352pACLACEDMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Configure destination MAC address for this ACE. : A frame that hits this ACE matches this destination MAC address value. Any: Don't care. Broadcast: Frame must be broadcast. Unicast: Frame must be unicast. Multicast: Frame must be multicast. " ::= { gs2352pACLACEEntry 20 } gs2352pACLACEArpOpcode OBJECT-TYPE SYNTAX INTEGER { any(0), arp(1), rarp(2), other(3), noData(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure ARP opcode for this ACE. default: 0, 0: Any - Don't care. 1: arp. 2: rarp. 3: other. 4: No data. range : 0 - 4 " ::= { gs2352pACLACEEntry 21 } gs2352pACLACEArpFlagsRequestReply OBJECT-TYPE SYNTAX INTEGER { reply(0), request(1), any(2), noData(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the available ARP/RARP opcode (OP) flag for this ACE. default: 2, 0: Frame must have ARP Reply or RARP Reply OP flag. 1: Frame must have ARP Request or RARP Request OP flag set. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2352pACLACEEntry 22 } gs2352pACLACEArpFlagsArpSmac OBJECT-TYPE SYNTAX INTEGER { notEqualSMAC(0), equalSMAC(1), any(2), noData(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Specify whether frames can hit the action according to their sender hardware address field (SHA) settings. default: 2, 0: ARP frames where SHA is not equal to the SMAC address. 1: ARP frames where SHA is equal to the SMAC address. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2352pACLACEEntry 23 } gs2352pACLACEArpFlagsRarpDmac OBJECT-TYPE SYNTAX INTEGER { notEqualDMAC(0), equalDMAC(1), any(2), noData(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Specify whether frames can hit the action according to their target hardware address field (THA) settings. default: 2, 0: RARP frames where THA is not equal to the DMAC address. 1: RARP frames where THA is equal to the DMAC address. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2352pACLACEEntry 24 } gs2352pACLACEArpFlagsLength OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and protocol address length (PLN) settings. default: 2, 0: ARP/RARP frames where the HLN is not equal to Ethernet(0x06) or the (PLN) is not equal to IPv4(0x04). 1: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is equal to IPv4(0x04). 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2352pACLACEEntry 25 } gs2352pACLACEArpFlagsIp OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings. default: 2, 0: ARP/RARP frames where the HLD is not equal to Ethernet(1). 1: ARP/RARP frames where the HLD is equal to Ethernet(1). 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2352pACLACEEntry 26 } gs2352pACLACEArpFlagsEthernet OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings. default: 2, 0: ARP/RARP frames where the PRO is not equal to IP\n(0x800). 1: ARP/RARP frames where the PRO is equal to IP(0x800). 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2352pACLACEEntry 27 } gs2352pACLACESIPType OBJECT-TYPE SYNTAX INTEGER { any(0), ip(1), noData(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure source IP address for this ACE. default: 0, 0: Any - Don't care. 1: IP Address. 2: No data. range : 0 - 2" ::= { gs2352pACLACEEntry 28 } gs2352pACLACESIPIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "A frame that hits this ACE matches this source IP address value." ::= { gs2352pACLACEEntry 29 } gs2352pACLACESIPNetworkPrefix OBJECT-TYPE SYNTAX Integer32(1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Network prefix. default: 32, 0: No data. range : 1 - 32" ::= { gs2352pACLACEEntry 30 } gs2352pACLACEDIPType OBJECT-TYPE SYNTAX INTEGER { any(0), ip(1),noData(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure destination IP address for this ACE. default: 0, 0: Any - Don't care. 1: IP Address. 2: No data. range : 0 - 1" ::= { gs2352pACLACEEntry 32 } gs2352pACLACEDIPIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "A frame that hits this ACE matches this destination IP address value." ::= { gs2352pACLACEEntry 33 } gs2352pACLACEDIPNetworkPrefix OBJECT-TYPE SYNTAX Integer32(0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Network prefix. default: 32, 0: No data. range : 1 - 32" ::= { gs2352pACLACEEntry 34 } gs2352pACLACEIPProtocol OBJECT-TYPE SYNTAX Integer32(0..257) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure IP protocol for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 257" ::= { gs2352pACLACEEntry 36 } gs2352pACLACEIPFlagsTTL OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure IP Time-to-Live flags for this ACE. default: 2, 0: IPv4 frames with a Time-to-Live field is equal to zero. 1: IPv4 frames with a Time-to-Live field greater than zero. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2352pACLACEEntry 37 } gs2352pACLACEIPFlagsOptions OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure IP options flag for this ACE. default: 2, 0: IPv4 frames where the options flag is unset. 1: IPv4 frames where the options flag is set. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2352pACLACEEntry 38 } gs2352pACLACEIPFlagsFragment OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure IP fragment offset flags for this ACE. default: 2, 0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero. 1: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2352pACLACEEntry 39 } gs2352pACLACEICMPType OBJECT-TYPE SYNTAX Integer32(0..257) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure ICMP type for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 257" ::= { gs2352pACLACEEntry 40 } gs2352pACLACEICMPCode OBJECT-TYPE SYNTAX Integer32(0..257) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure ICMP code for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 257" ::= { gs2352pACLACEEntry 41 } gs2352pACLACESourcePortMin OBJECT-TYPE SYNTAX Integer32(0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure Source UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65536" ::= { gs2352pACLACEEntry 42 } gs2352pACLACESourcePortMax OBJECT-TYPE SYNTAX Integer32(0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure Source UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65536" ::= { gs2352pACLACEEntry 43 } gs2352pACLACEDestPortMin OBJECT-TYPE SYNTAX Integer32(0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure Destination UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65536" ::= { gs2352pACLACEEntry 44 } gs2352pACLACEDestPortMax OBJECT-TYPE SYNTAX Integer32(0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure Destination UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65536" ::= { gs2352pACLACEEntry 45 } gs2352pACLACETCPFlagsFin OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure TCP (FIN) flags for this ACE. default: 2, 0: TCP frames where the FIN field is unset. 1: TCP frames where the FIN field is set. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2352pACLACEEntry 46 } gs2352pACLACETCPFlagsSyn OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure TCP (SYN) flags for this ACE. default: 2, 0: TCP frames where the SYN field is unset. 1: TCP frames where the SYN field is set. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2352pACLACEEntry 47 } gs2352pACLACETCPFlagsRst OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure TCP (RST) flags for this ACE. default: 2, 0: TCP frames where the RST field is unset. 1: TCP frames where the RST field is set. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2352pACLACEEntry 48 } gs2352pACLACETCPFlagsPsh OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure TCP (PSH) flags for this ACE. default: 2, 0: TCP frames where the PSH field is unset. 1: TCP frames where the PSH field is set. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2352pACLACEEntry 49 } gs2352pACLACETCPFlagsAck OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure TCP (ACK) flags for this ACE. default: 2, 0: TCP frames where the ACK field is unset. 1: TCP frames where the ACK field is set. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2352pACLACEEntry 50 } gs2352pACLACETCPFlagsUrg OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure TCP (URG) flags for this ACE. default: 2, 0: TCP frames where the URG field is unset. 1: TCP frames where the URG field is set. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2352pACLACEEntry 51 } gs2352pACLACERowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION " 1: active 2: notInservice 4: destroy 5: undo" ::= { gs2352pACLACEEntry 66 } gs2352pACLACEClear OBJECT-TYPE SYNTAX INTEGER { noAction(0), clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : No action 1 : Clear all ACL counters." ::= { gs2352pACLACE 3 } gs2352pACLACEMoveACEID OBJECT-TYPE SYNTAX Integer32(0..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Move ACE, default: 0 ACE ID must be exist. range : 0 - 256." ::= { gs2352pACLACE 4 } gs2352pACLACEMoveNextACEID OBJECT-TYPE SYNTAX Integer32(0..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Move ACE, default: 0 If the next ACE ID is non zero, the ACE will be placed before this ACE in the list. If the next ACE ID is zero, the ACE will be placed last in the list. range : 0 - 256." ::= { gs2352pACLACE 5 } gs2352pACLACEStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PACLACEStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " ACL ACE Status entry. " ::= { gs2352pACLACE 6 } gs2352pACLACEStatusEntry OBJECT-TYPE SYNTAX GS2352PACLACEStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pACLACEStatusIndex } ::= { gs2352pACLACEStatusTable 1 } GS2352PACLACEStatusEntry ::= SEQUENCE { gs2352pACLACEStatusIndex Integer32, gs2352pACLACEStatusUser DisplayString, gs2352pACLACEStatusID Integer32, gs2352pACLACEStatusIngressPort DisplayString, gs2352pACLACEStatusFrameType DisplayString, gs2352pACLACEStatusAction DisplayString, gs2352pACLACEStatusRateLimiter DisplayString, gs2352pACLACEStatusPortCopy DisplayString, gs2352pACLACEStatusMirror DisplayString, gs2352pACLACEStatusCPU DisplayString, gs2352pACLACEStatusCounter Counter32, gs2352pACLACEStatusConflict DisplayString } gs2352pACLACEStatusIndex OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pACLACEStatusEntry 1 } gs2352pACLACEStatusUser OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the ACL user. S : Static. IPMG : IP Management. IPSG : IP Source Guard. IPMC : IPMC. ARPI : Arp Inspection. UPnP : UPnP. DHCP : DHCP. " ::= { gs2352pACLACEStatusEntry 2 } gs2352pACLACEStatusID OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS read-only STATUS current DESCRIPTION " ACE ID. range : 1 - 256. " ::= { gs2352pACLACEStatusEntry 3 } gs2352pACLACEStatusIngressPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the ingress port of the ACE. Possible values are: All: The ACE will match all ingress port. Port: The ACE will match a specific ingress port. " ::= { gs2352pACLACEStatusEntry 4 } gs2352pACLACEStatusFrameType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the frame type of the ACE. " ::= { gs2352pACLACEStatusEntry 5 } gs2352pACLACEStatusAction OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the forwarding action of the ACE. " ::= { gs2352pACLACEStatusEntry 6 } gs2352pACLACEStatusRateLimiter OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the rate limiter number of the ACE. " ::= { gs2352pACLACEStatusEntry 7 } gs2352pACLACEStatusPortCopy OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the port number. " ::= { gs2352pACLACEStatusEntry 8 } gs2352pACLACEStatusMirror OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Specify the mirror operation of this port. " ::= { gs2352pACLACEStatusEntry 9 } gs2352pACLACEStatusCPU OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Forward packet that matched the specific ACE to CPU. " ::= { gs2352pACLACEStatusEntry 10 } gs2352pACLACEStatusCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The counter indicates the number of times the ACE was hit by a frame. " ::= { gs2352pACLACEStatusEntry 11 } gs2352pACLACEStatusConflict OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to hardware limitations. " ::= { gs2352pACLACEStatusEntry 12 } gs2352pLoopProtection OBJECT IDENTIFIER ::= { gs2352pConfiguration 12 } gs2352pLoopProtectionConfig OBJECT IDENTIFIER ::= { gs2352pLoopProtection 1 } gs2352pLoopProtectionGlobalEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure loop protection mode. 0: disable, 1: enable, default: disable. " ::= { gs2352pLoopProtectionConfig 1 } gs2352pLoopProtectionTranmisstionTime OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure loop protection transmit interval. default: 5, range: 1-10. " ::= { gs2352pLoopProtectionConfig 2 } gs2352pLoopProtectionShutdownTime OBJECT-TYPE SYNTAX Integer32(0..604800) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure loop protection shutdown time. default: 180, range: 0-604800. " ::= { gs2352pLoopProtectionConfig 3 } gs2352pLoopProtectionConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PLoopProtectionConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show Loop Protection configurations. " ::= { gs2352pLoopProtectionConfig 4 } gs2352pLoopProtectionConfigurationEntry OBJECT-TYPE SYNTAX GS2352PLoopProtectionConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pLoopProtectionConfPort } ::= { gs2352pLoopProtectionConfigurationTable 1 } GS2352PLoopProtectionConfigurationEntry ::= SEQUENCE { gs2352pLoopProtectionConfPort Integer32, gs2352pLoopProtectionConfEnable INTEGER, gs2352pLoopProtectionConfAction INTEGER, gs2352pLoopProtectionConfTxmode INTEGER } gs2352pLoopProtectionConfPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pLoopProtectionConfigurationEntry 1 } gs2352pLoopProtectionConfEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure loop protection port mode. 0: disable, 1: enable, default: enable. " ::= { gs2352pLoopProtectionConfigurationEntry 2 } gs2352pLoopProtectionConfAction OBJECT-TYPE SYNTAX INTEGER { shutdown(0), shutdownLog(1), log(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Configure loop protection port action. 0: Shutdown port, 1: Shutdown port and Log, 2: Log Only, default: Shutdown port. " ::= { gs2352pLoopProtectionConfigurationEntry 3 } gs2352pLoopProtectionConfTxmode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure loop protection port transmit mode. 0: disable, 1: enable, default: enable. " ::= { gs2352pLoopProtectionConfigurationEntry 4 } gs2352pLoopProtectionStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PLoopProtectionStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show Loop Protection Status. " ::= { gs2352pLoopProtection 2 } gs2352pLoopProtectionStatusEntry OBJECT-TYPE SYNTAX GS2352PLoopProtectionStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pLoopProtectionStatusPort } ::= { gs2352pLoopProtectionStatusTable 1 } GS2352PLoopProtectionStatusEntry ::= SEQUENCE { gs2352pLoopProtectionStatusPort Integer32, gs2352pLoopProtectionStatusAction DisplayString, gs2352pLoopProtectionStatusTransmit DisplayString, gs2352pLoopProtectionStatusLoops Integer32, gs2352pLoopProtectionStatusStatus DisplayString, gs2352pLoopProtectionStatusLoop DisplayString, gs2352pLoopProtectionStatusTimeLastLoop DisplayString } gs2352pLoopProtectionStatusPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pLoopProtectionStatusEntry 1 } gs2352pLoopProtectionStatusAction OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The currently configured port action. " ::= { gs2352pLoopProtectionStatusEntry 2 } gs2352pLoopProtectionStatusTransmit OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The currently configured port transmit mode. " ::= { gs2352pLoopProtectionStatusEntry 3 } gs2352pLoopProtectionStatusLoops OBJECT-TYPE SYNTAX Integer32(0..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION " The number of loops detected on this port. " ::= { gs2352pLoopProtectionStatusEntry 4 } gs2352pLoopProtectionStatusStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The current loop protection status of the port. " ::= { gs2352pLoopProtectionStatusEntry 5 } gs2352pLoopProtectionStatusLoop OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Whether a loop is currently detected on the port. " ::= { gs2352pLoopProtectionStatusEntry 6 } gs2352pLoopProtectionStatusTimeLastLoop OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The time of the last loop event detected. " ::= { gs2352pLoopProtectionStatusEntry 7 } gs2352pPoe OBJECT IDENTIFIER ::= { gs2352pConfiguration 13 } gs2352pPoeStatus OBJECT IDENTIFIER ::= { gs2352pPoe 1 } gs2352pPoeStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PPoeStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure PoE Scheduling Table. " ::= { gs2352pPoeStatus 1 } gs2352pPoeStatusEntry OBJECT-TYPE SYNTAX GS2352PPoeStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pPoeStatusLocalPort } ::= { gs2352pPoeStatusTable 1 } GS2352PPoeStatusEntry ::= SEQUENCE { gs2352pPoeStatusLocalPort Integer32, gs2352pPoeStatusPDclass INTEGER, gs2352pPoeStatusPowerRequested DisplayString, gs2352pPoeStatusPowerAllocated DisplayString, gs2352pPoeStatusPowerUsed DisplayString, gs2352pPoeStatusCurrentUsed DisplayString, gs2352pPoeStatusPriority DisplayString, gs2352pPoeStatusPortStatus DisplayString } gs2352pPoeStatusLocalPort OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pPoeStatusEntry 1} gs2352pPoeStatusPDclass OBJECT-TYPE SYNTAX INTEGER (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the QCL user. 0: Max. power 15.4 W, 1: Max. power 4.0 W, 2: Max. power 7.0 W, 3: Max. power 15.4 W, 4: Max. power 30.0 W. " ::= { gs2352pPoeStatusEntry 2 } gs2352pPoeStatusPowerRequested OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Power Requested shows the requested amount of power the PD wants to be reserved. " ::= { gs2352pPoeStatusEntry 3} gs2352pPoeStatusPowerAllocated OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Power Allocated shows the amount of power the switch has allocated for the PD. " ::= { gs2352pPoeStatusEntry 4} gs2352pPoeStatusPowerUsed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Power Used shows how much power the PD currently is using. " ::= { gs2352pPoeStatusEntry 5} gs2352pPoeStatusCurrentUsed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Power Used shows how much current the PD currently is using. " ::= { gs2352pPoeStatusEntry 6} gs2352pPoeStatusPriority OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Priority shows the port's priority configured by the user. " ::= { gs2352pPoeStatusEntry 7} gs2352pPoeStatusPortStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Port Status shows the port's status. " ::= { gs2352pPoeStatusEntry 8} gs2352pPoeStatusTotalPowerRequested OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Total Power Requested." ::= { gs2352pPoeStatus 2} gs2352pPoeStatusTotalPowerAllocated OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Total Power allocated." ::= { gs2352pPoeStatus 3} gs2352pPoeStatusTotalPowerUsed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Total Power Used." ::= { gs2352pPoeStatus 4} gs2352pPoeStatusTotalCurrentUsed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Total Current Used." ::= { gs2352pPoeStatus 5} gs2352pPoeMcuVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " PoE MCU version." ::= { gs2352pPoeStatus 6 } gs2352pPoePowerDelay OBJECT IDENTIFIER ::= { gs2352pPoe 2 } gs2352pPoePowerDelayTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PPoePowerDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure PoE Power Delay mode. " ::= { gs2352pPoePowerDelay 1 } gs2352pPoePowerDelayEntry OBJECT-TYPE SYNTAX GS2352PPoePowerDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pPoePowerDelayPort } ::= { gs2352pPoePowerDelayTable 1 } GS2352PPoePowerDelayEntry ::= SEQUENCE { gs2352pPoePowerDelayPort Integer32, gs2352pPoePowerDelayMode INTEGER, gs2352pPoePowerDelayTime Integer32 } gs2352pPoePowerDelayPort OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pPoePowerDelayEntry 1 } gs2352pPoePowerDelayMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Turn on / off the power delay function, 0: disable, 1: enable, default: disable. " ::= { gs2352pPoePowerDelayEntry 2 } gs2352pPoePowerDelayTime OBJECT-TYPE SYNTAX Integer32(0..300) MAX-ACCESS read-write STATUS current DESCRIPTION "set Delay Time, default: 0, range: 0-300 sec. " ::= { gs2352pPoePowerDelayEntry 3 } gs2352pPoeAutoCheck OBJECT IDENTIFIER ::= { gs2352pPoe 3 } gs2352pPoeAutoCheckPingCheck OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "connection between PoE port and power device. 0: disable, 1: enable, default: disable. " ::= { gs2352pPoeAutoCheck 1 } gs2352pPoeAutoCheckTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PPoeAutoCheckEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure PoE Power Delay mode. " ::= { gs2352pPoeAutoCheck 2 } gs2352pPoeAutoCheckEntry OBJECT-TYPE SYNTAX GS2352PPoeAutoCheckEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pPoeAutoCheckPort } ::= { gs2352pPoeAutoCheckTable 1 } GS2352PPoeAutoCheckEntry ::= SEQUENCE { gs2352pPoeAutoCheckPort Integer32, gs2352pPoeAutoCheckPingIPAddress DisplayString, gs2352pPoeAutoCheckIntervalTime Integer32, gs2352pPoeAutoCheckRetryTime Integer32, gs2352pPoeAutoCheckFailureLog DisplayString, gs2352pPoeAutoCheckFailureAction INTEGER, gs2352pPoeAutoCheckRebootTime Integer32 } gs2352pPoeAutoCheckPort OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pPoeAutoCheckEntry 1 } gs2352pPoeAutoCheckPingIPAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address the system should ping. default: 0.0.0.0 . " ::= { gs2352pPoeAutoCheckEntry 2 } gs2352pPoeAutoCheckIntervalTime OBJECT-TYPE SYNTAX Integer32(10..120) MAX-ACCESS read-write STATUS current DESCRIPTION "Device will send checking message to PD each interval time. default: 30, range: 10-120 sec. " ::= { gs2352pPoeAutoCheckEntry 3 } gs2352pPoeAutoCheckRetryTime OBJECT-TYPE SYNTAX Integer32(1..5) MAX-ACCESS read-write STATUS current DESCRIPTION "It will retry to send detection again. default: 3, range: 1-5. " ::= { gs2352pPoeAutoCheckEntry 4 } gs2352pPoeAutoCheckFailureLog OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Failure loggings counter. " ::= { gs2352pPoeAutoCheckEntry 5 } gs2352pPoeAutoCheckFailureAction OBJECT-TYPE SYNTAX INTEGER { nothing(0), reboot(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "It will retry to send detection again, 0: Nothing, 1: Reboot Remote PD, default: Nothing. " ::= { gs2352pPoeAutoCheckEntry 6 } gs2352pPoeAutoCheckRebootTime OBJECT-TYPE SYNTAX Integer32(3..120) MAX-ACCESS read-write STATUS current DESCRIPTION "When PD has been rebooted, the PoE port restored power after the specified time. default: 15, range: 3-120 sec. " ::= { gs2352pPoeAutoCheckEntry 7 } gs2352pPoeScheduling OBJECT IDENTIFIER ::= { gs2352pPoe 4 } gs2352pPoeSchedulingTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PPoeSchedulingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure PoE Scheduling Table. " ::= { gs2352pPoeScheduling 1 } gs2352pPoeSchedulingEntry OBJECT-TYPE SYNTAX GS2352PPoeSchedulingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pPoeSchedulingPort } ::= { gs2352pPoeSchedulingTable 1 } GS2352PPoeSchedulingEntry ::= SEQUENCE { gs2352pPoeSchedulingPort Integer32, gs2352pPoeSchedulingStatus INTEGER } gs2352pPoeSchedulingPort OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pPoeSchedulingEntry 1 } gs2352pPoeSchedulingStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "PoE Scheduling Status. 0: Disable, 1: Enable, default: Disable. " ::= { gs2352pPoeSchedulingEntry 2 } gs2352pPoeSchedulingTimeTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PPoeSchedulingTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show Poe Scheduling Time Config. " ::= { gs2352pPoeScheduling 2 } gs2352pPoeSchedulingTimeEntry OBJECT-TYPE SYNTAX GS2352PPoeSchedulingTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pPoeSchedulingTimePort, gs2352pPoeSchedulingTimeWeek, gs2352pPoeSchedulingTimeHour } ::= { gs2352pPoeSchedulingTimeTable 1 } GS2352PPoeSchedulingTimeEntry ::= SEQUENCE { gs2352pPoeSchedulingTimePort Integer32, gs2352pPoeSchedulingTimeWeek INTEGER, gs2352pPoeSchedulingTimeHour Integer32, gs2352pPoeSchedulingProvidePower INTEGER } gs2352pPoeSchedulingTimePort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pPoeSchedulingTimeEntry 1 } gs2352pPoeSchedulingTimeWeek OBJECT-TYPE SYNTAX INTEGER { monday(1), tuseday(2), wednesday(3), thursday(4), friday(5), saturday(6), sunday(7) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " range: 1-7, Sunday:7, Monday:1, Tuseday:2, Wednesday:3, Thursday:4, Friday:5, Saturday:6. " ::= { gs2352pPoeSchedulingTimeEntry 2 } gs2352pPoeSchedulingTimeHour OBJECT-TYPE SYNTAX Integer32(1..24) MAX-ACCESS not-accessible STATUS current DESCRIPTION " range: 1-24, 24: hour 0, 1: hour 1, 2: hour2..." ::= { gs2352pPoeSchedulingTimeEntry 3 } gs2352pPoeSchedulingProvidePower OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " 0: disable, 1: enable, default: disable. " ::= { gs2352pPoeSchedulingTimeEntry 4 } gs2352pPoeConfiguration OBJECT IDENTIFIER ::= { gs2352pPoe 5 } gs2352pPoeConfigurationPrimaryPowerSupply OBJECT-TYPE SYNTAX Integer32(0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "It must be defined what amount of power the primary and backup power sources can deliver. " ::= { gs2352pPoeConfiguration 1 } gs2352pPoeConfigurationRetryTime OBJECT-TYPE SYNTAX Integer32(0|5|10|20|30|40|50|60) MAX-ACCESS read-write STATUS current DESCRIPTION "The period (in seconds) for trying to turn on an overloaded PoE port. 0: disable, 5 sec,10 sec,20 sec,30 sec,40 sec,50 sec,60 sec, default: 60 sec. " ::= { gs2352pPoeConfiguration 2 } gs2352pPoeConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PPoeConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure PoE Configuration mode. " ::= { gs2352pPoeConfiguration 3 } gs2352pPoeConfigurationEntry OBJECT-TYPE SYNTAX GS2352PPoeConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pPoeConfigurationPort } ::= { gs2352pPoeConfigurationTable 1 } GS2352PPoeConfigurationEntry ::= SEQUENCE { gs2352pPoeConfigurationPort Integer32, gs2352pPoeConfigurationPoEMode INTEGER, gs2352pPoeConfigurationPriority INTEGER, gs2352pPoeConfigurationMaximumPower DisplayString, gs2352pPoeConfigurationDetection INTEGER, gs2352pPoeConfigurationReset INTEGER } gs2352pPoeConfigurationPort OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pPoeConfigurationEntry 1 } gs2352pPoeConfigurationPoEMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The PoE Mode represents the PoE operating mode for the port. 0: Disable, 1: Enable, default: Enable. " ::= { gs2352pPoeConfigurationEntry 2 } gs2352pPoeConfigurationPriority OBJECT-TYPE SYNTAX INTEGER { low(0), high(1), critical(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Priority represents the ports priority. There are three levels of power priority named Low, High and Critical. 0: Low, 1: High, 2: Critical, default: Low. " ::= { gs2352pPoeConfigurationEntry 3 } gs2352pPoeConfigurationMaximumPower OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The Maximum Power value contains a numerical value that indicates the maximum power in watts that can be delivered to a remote device. default: 15.4[W], max: 30[W]. " ::= { gs2352pPoeConfigurationEntry 4 } gs2352pPoeConfigurationDetection OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure PoE port capacitor detection. 0: No Detection(read only), 1: legacy, 2: 4-point, 3: 4-point-legacy, 4: 2-point, 5: 2-point-legacy, default: 4-point. " ::= { gs2352pPoeConfigurationEntry 5 } gs2352pPoeConfigurationReset OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the specific PoE port. 0: Disable, 1: Enable, default: Disable. " ::= { gs2352pPoeConfigurationEntry 6 } gs2352pPoeConfigurationLegacyMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Legacy Detection. 0: Disable, 1: Enable, default: Disable. " ::= { gs2352pPoeConfiguration 4 } gs2352pQos OBJECT IDENTIFIER ::= { gs2352pConfiguration 14 } gs2352pQosPortClassification OBJECT IDENTIFIER ::= { gs2352pQos 1 } gs2352pQosPortClassificationTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PQosPortClassificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " QoS Ingress Port Classification . " ::= { gs2352pQosPortClassification 1 } gs2352pQosPortClassificationEntry OBJECT-TYPE SYNTAX GS2352PQosPortClassificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pQosPortClassificationPort } ::= { gs2352pQosPortClassificationTable 1 } GS2352PQosPortClassificationEntry ::= SEQUENCE { gs2352pQosPortClassificationPort Integer32, gs2352pQosPortClassificationQoSclass Integer32, gs2352pQosPortClassificationDPlevel Integer32, gs2352pQosPortClassificationPCP Integer32, gs2352pQosPortClassificationDEI INTEGER, gs2352pQosPortClassificationTagClass INTEGER, gs2352pQosPortClassificationDSCPBased INTEGER } gs2352pQosPortClassificationPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pQosPortClassificationEntry 1 } gs2352pQosPortClassificationQoSclass OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the default QoS class, i.e., the QoS class for frames not classified in any other way. There is a one to one mapping between QoS class, queue and priority. A QoS class of 0 (zero) has the lowest priority. Note: If the QoS class has been dynamically changed, then the actual QoS class is shown in parentheses after the configured QoS class. Configure the default QoS class. range: 0-7, default: 0. " ::= { gs2352pQosPortClassificationEntry 2 } gs2352pQosPortClassificationDPlevel OBJECT-TYPE SYNTAX Integer32(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " DP level for frames not classified in any other way. range: 0-3, default: 0. " ::= { gs2352pQosPortClassificationEntry 3 } gs2352pQosPortClassificationPCP OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " Priority Code Point. It is a 3-bit field storing the priority level for the 802.1Q frame. range: 0-7, default: 0. " ::= { gs2352pQosPortClassificationEntry 4 } gs2352pQosPortClassificationDEI OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Drop Eligible Indicator. It is a 1-bit field in the VLAN. range 0-1, default: 0. " ::= { gs2352pQosPortClassificationEntry 5 } gs2352pQosPortClassificationTagClass OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Configure the classification mode for tagged frames. 0: Disable, 1: Enable, default: Disable. " ::= { gs2352pQosPortClassificationEntry 6 } gs2352pQosPortClassificationDSCPBased OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Click to Enable DSCP Based QoS Ingress Port Classification. 0: disable, 1: enable, default: disable. " ::= { gs2352pQosPortClassificationEntry 7 } gs2352pQoSIngressPortTagClassificationTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PQoSIngressPortTagClassificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show QoS Ingress Port Tag Classification. " ::= { gs2352pQosPortClassification 2 } gs2352pQoSIngressPortTagClassificationEntry OBJECT-TYPE SYNTAX GS2352PQoSIngressPortTagClassificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pQoSIngressPortTagClassificationPort, gs2352pQoSIngressPortTagPCP, gs2352pQoSIngressPortTagDEI } ::= { gs2352pQoSIngressPortTagClassificationTable 1 } GS2352PQoSIngressPortTagClassificationEntry ::= SEQUENCE { gs2352pQoSIngressPortTagClassificationPort Integer32, gs2352pQoSIngressPortTagPCP INTEGER, gs2352pQoSIngressPortTagDEI INTEGER, gs2352pQoSIngressPortTagQosClass Integer32, gs2352pQoSIngressPortTagDPLevel Integer32 } gs2352pQoSIngressPortTagClassificationPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pQoSIngressPortTagClassificationEntry 1 } gs2352pQoSIngressPortTagPCP OBJECT-TYPE SYNTAX INTEGER { pcp0(1), pcp1(2), pcp2(3), pcp3(4), pcp4(5), pcp5(6), pcp6(7), pcp7(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " range: 1-8, PCP0:1, PCP1:2... " ::= { gs2352pQoSIngressPortTagClassificationEntry 2 } gs2352pQoSIngressPortTagDEI OBJECT-TYPE SYNTAX INTEGER { dei0(1), dei1(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " range: 1-2, DEI0:1, DEI1:2. " ::= { gs2352pQoSIngressPortTagClassificationEntry 3 } gs2352pQoSIngressPortTagQosClass OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " range: 0-7. " ::= { gs2352pQoSIngressPortTagClassificationEntry 4 } gs2352pQoSIngressPortTagDPLevel OBJECT-TYPE SYNTAX Integer32(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " range: 0-3. " ::= { gs2352pQoSIngressPortTagClassificationEntry 5 } gs2352pQosPortPolicingTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PQosPortPolicingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the Policer settings for all switch ports. " ::= { gs2352pQos 2 } gs2352pQosPortPolicingEntry OBJECT-TYPE SYNTAX GS2352PQosPortPolicingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pQosPortPolicingPort } ::= { gs2352pQosPortPolicingTable 1 } GS2352PQosPortPolicingEntry ::= SEQUENCE { gs2352pQosPortPolicingPort Integer32, gs2352pQosPortPolicingMode INTEGER, gs2352pQosPortPolicingRate Integer32, gs2352pQosPortPolicingUnit INTEGER, gs2352pQosPortPolicingFlowControl INTEGER } gs2352pQosPortPolicingPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pQosPortPolicingEntry 1 } gs2352pQosPortPolicingMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Controls whether the policer is enabled on this switch port. 0: disable, 1: enable, default: disable. " ::= { gs2352pQosPortPolicingEntry 2 } gs2352pQosPortPolicingRate OBJECT-TYPE SYNTAX Integer32(100..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the rate for the policer. range: 100-10000000(kbps/fps), default: 500(kbps). " ::= { gs2352pQosPortPolicingEntry 3 } gs2352pQosPortPolicingUnit OBJECT-TYPE SYNTAX INTEGER { kbps(0), fps(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the unit of measure for the policer rate. 0: kbps, 1: fps, default: kbps. " ::= { gs2352pQosPortPolicingEntry 4 } gs2352pQosPortPolicingFlowControl OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " If flow control is enabled and the port is in flow control mode, then pause frames are sent instead of discarding frames. 0: disable, 1: enable, default: disable. " ::= { gs2352pQosPortPolicingEntry 5 } gs2352pQosPortScheduler OBJECT IDENTIFIER ::= { gs2352pQos 3 } gs2352pQosPortSchedulerModeTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PQosPortSchedulerModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the basic QoS Port Scheduler Mode settings for all switch ports. " ::= { gs2352pQosPortScheduler 1 } gs2352pQosPortSchedulerModeEntry OBJECT-TYPE SYNTAX GS2352PQosPortSchedulerModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pQosSchedulerModePort } ::= { gs2352pQosPortSchedulerModeTable 1 } GS2352PQosPortSchedulerModeEntry ::= SEQUENCE { gs2352pQosSchedulerModePort Integer32, gs2352pQosSchedulerMode INTEGER, gs2352pQosSchedulerShaper INTEGER, gs2352pQosSchedulerShaperRate Integer32 } gs2352pQosSchedulerModePort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pQosPortSchedulerModeEntry 1 } gs2352pQosSchedulerMode OBJECT-TYPE SYNTAX INTEGER { strictPriority(0), weighted(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Controls whether the scheduler mode is Strict Priority or Weighted on this switch port. 0:Strict Priority 1:Weighted default: Strict Priority. " ::= { gs2352pQosPortSchedulerModeEntry 2 } gs2352pQosSchedulerShaper OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Controls whether the port shaper is enabled 0: Disable 1: Enable. default: disable. " ::= { gs2352pQosPortSchedulerModeEntry 3 } gs2352pQosSchedulerShaperRate OBJECT-TYPE SYNTAX Integer32(100..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the rate for the port shaper. range: 100-1000000 default: 500 kbps. " ::= { gs2352pQosPortSchedulerModeEntry 4 } gs2352pQosPortSchedulerTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PQosPortSchedulerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show Qos Port Scheduler. " ::= { gs2352pQosPortScheduler 2 } gs2352pQosPortSchedulerEntry OBJECT-TYPE SYNTAX GS2352PQosPortSchedulerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pQosSchedulerPort, gs2352pQosSchedulerPortQueue} ::= { gs2352pQosPortSchedulerTable 1 } GS2352PQosPortSchedulerEntry ::= SEQUENCE { gs2352pQosSchedulerPort Integer32, gs2352pQosSchedulerPortQueue INTEGER, gs2352pQosSchedulerPortQueueShaper INTEGER, gs2352pQosSchedulerPortQueueShaperRate Integer32, gs2352pQosSchedulerPortQueueShaperExcess INTEGER, gs2352pQosSchedulerPortQueueSchedulerWeight Integer32, gs2352pQosSchedulerPortQueueSchedulerPercent DisplayString } gs2352pQosSchedulerPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pQosPortSchedulerEntry 1 } gs2352pQosSchedulerPortQueue OBJECT-TYPE SYNTAX INTEGER { q0(1), q1(2), q2(3), q3(4), q4(5), q5(6), q6(7), q7(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " range: 1-8. Q0: 1, Q1: 2, ... " ::= { gs2352pQosPortSchedulerEntry 2 } gs2352pQosSchedulerPortQueueShaper OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " 0: disable 1:enable, default: 0. " ::= { gs2352pQosPortSchedulerEntry 3 } gs2352pQosSchedulerPortQueueShaperRate OBJECT-TYPE SYNTAX Integer32(100..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " range: 100..1000000 kbps. " ::= { gs2352pQosPortSchedulerEntry 4 } gs2352pQosSchedulerPortQueueShaperExcess OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " 0: disable 1:enable, default: 0. " ::= { gs2352pQosPortSchedulerEntry 5 } gs2352pQosSchedulerPortQueueSchedulerWeight OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-write STATUS current DESCRIPTION " range: 1-100, default: 17. Only use in Q0 - Q5. Q6 & Q7 show 0 " ::= { gs2352pQosPortSchedulerEntry 6 } gs2352pQosSchedulerPortQueueSchedulerPercent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Only use in Q0 - Q5. Q6 & Q7 show empty " ::= { gs2352pQosPortSchedulerEntry 7 } gs2352pQosPortEgressTagRemarking OBJECT IDENTIFIER ::= { gs2352pQos 4 } gs2352pQosPortEgressTagRemarkingTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PQosPortEgressTagRemarkingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the basic QoS Port Egress Tag Remark Configuration settings for all switch ports. " ::= { gs2352pQosPortEgressTagRemarking 1 } gs2352pQosPortEgressTagRemarkingEntry OBJECT-TYPE SYNTAX GS2352PQosPortEgressTagRemarkingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pQosEgressTagRemarkingPort } ::= { gs2352pQosPortEgressTagRemarkingTable 1 } GS2352PQosPortEgressTagRemarkingEntry ::= SEQUENCE { gs2352pQosEgressTagRemarkingPort Integer32, gs2352pQosEgressTagRemarkingMode INTEGER } gs2352pQosEgressTagRemarkingPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pQosPortEgressTagRemarkingEntry 1 } gs2352pQosEgressTagRemarkingMode OBJECT-TYPE SYNTAX INTEGER { classified(0), default(1), mapped(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " the tag remarking mode for this port. 0:Classified, Use classified PCP/DEI values. 1:Default, Use default PCP/DEI values. 2:Mapped, Use mapped versions of QoS class and DP level." ::= { gs2352pQosPortEgressTagRemarkingEntry 2 } gs2352pQosPortEgressTagRemarkingDefTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PQosPortEgressTagRemarkingDefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the basic QoS Port Egress Tag Remark Configuration settings for all switch ports. " ::= { gs2352pQosPortEgressTagRemarking 2 } gs2352pQosPortEgressTagRemarkingDefEntry OBJECT-TYPE SYNTAX GS2352PQosPortEgressTagRemarkingDefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pQosEgressTagRemarkingDefPort } ::= { gs2352pQosPortEgressTagRemarkingDefTable 1 } GS2352PQosPortEgressTagRemarkingDefEntry ::= SEQUENCE { gs2352pQosEgressTagRemarkingDefPort Integer32, gs2352pQosEgressTagRemarkingDefPCP Integer32, gs2352pQosEgressTagRemarkingDefDEI INTEGER } gs2352pQosEgressTagRemarkingDefPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pQosPortEgressTagRemarkingDefEntry 1 } gs2352pQosEgressTagRemarkingDefPCP OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the default PCP Range : 0-7" ::= { gs2352pQosPortEgressTagRemarkingDefEntry 2 } gs2352pQosEgressTagRemarkingDefDEI OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " controls the DEI Range 0-1" ::= { gs2352pQosPortEgressTagRemarkingDefEntry 3 } gs2352pQosPortEgressTagRemarkingMapDPTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PQosPortEgressTagRemarkingMapDPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show Qos Port Egress Tag Remarking Map DP. " ::= { gs2352pQosPortEgressTagRemarking 3 } gs2352pQosPortEgressTagRemarkingMapDPEntry OBJECT-TYPE SYNTAX GS2352PQosPortEgressTagRemarkingMapDPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pQosPortEgressTagRemarkingDPPort, gs2352pQosPortEgressTagRemarkingClassifiedDPLevel} ::= { gs2352pQosPortEgressTagRemarkingMapDPTable 1 } GS2352PQosPortEgressTagRemarkingMapDPEntry ::= SEQUENCE { gs2352pQosPortEgressTagRemarkingDPPort Integer32, gs2352pQosPortEgressTagRemarkingClassifiedDPLevel Integer32, gs2352pQosPortEgressTagRemarkingDPLevel INTEGER } gs2352pQosPortEgressTagRemarkingDPPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pQosPortEgressTagRemarkingMapDPEntry 1 } gs2352pQosPortEgressTagRemarkingClassifiedDPLevel OBJECT-TYPE SYNTAX Integer32(1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION " range: 1-4. " ::= { gs2352pQosPortEgressTagRemarkingMapDPEntry 2 } gs2352pQosPortEgressTagRemarkingDPLevel OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " range: 0-1. " ::= { gs2352pQosPortEgressTagRemarkingMapDPEntry 3 } gs2352pQosPortEgressTagRemarkingMapTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PQosPortEgressTagRemarkingMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show Qos Port Egress Tag Remarking Map. " ::= { gs2352pQosPortEgressTagRemarking 4 } gs2352pQosPortEgressTagRemarkingMapEntry OBJECT-TYPE SYNTAX GS2352PQosPortEgressTagRemarkingMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pQosPortEgressTagRemarkingMapPort, gs2352pQosTagRemarkingQoSClass, gs2352pQosTagRemarkingDPLevel } ::= { gs2352pQosPortEgressTagRemarkingMapTable 1 } GS2352PQosPortEgressTagRemarkingMapEntry ::= SEQUENCE { gs2352pQosPortEgressTagRemarkingMapPort Integer32, gs2352pQosTagRemarkingQoSClass INTEGER, gs2352pQosTagRemarkingDPLevel INTEGER, gs2352pQosTagRemarkingPCP Integer32, gs2352pQosTagRemarkingDEI INTEGER } gs2352pQosPortEgressTagRemarkingMapPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pQosPortEgressTagRemarkingMapEntry 1 } gs2352pQosTagRemarkingQoSClass OBJECT-TYPE SYNTAX INTEGER { class0(1), class1(2), class2(3), class3(4), class4(5), class5(6), class6(7), class7(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " range: 1-8, QoS Class0: 1, QoS Class1: 2... " ::= { gs2352pQosPortEgressTagRemarkingMapEntry 2 } gs2352pQosTagRemarkingDPLevel OBJECT-TYPE SYNTAX INTEGER { level0(1), level1(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " range: 1-2, DP Level0: 1, DP Level1: 2. " ::= { gs2352pQosPortEgressTagRemarkingMapEntry 3 } gs2352pQosTagRemarkingPCP OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " range: 0-7. " ::= { gs2352pQosPortEgressTagRemarkingMapEntry 4 } gs2352pQosTagRemarkingDEI OBJECT-TYPE SYNTAX INTEGER (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION " range: 0-1. " ::= { gs2352pQosPortEgressTagRemarkingMapEntry 5 } gs2352pQosPortDSCPTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PQosPortDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the basic QoS Port DSCP Configuration settings for all switch ports. " ::= { gs2352pQos 5 } gs2352pQosPortDSCPEntry OBJECT-TYPE SYNTAX GS2352PQosPortDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pQosPortDSCPPort } ::= { gs2352pQosPortDSCPTable 1 } GS2352PQosPortDSCPEntry ::= SEQUENCE { gs2352pQosPortDSCPPort Integer32, gs2352pQosPortDSCPIngressTranslate INTEGER, gs2352pQosPortDSCPIngressClassify INTEGER, gs2352pQosPortDSCPEgressRewrite INTEGER } gs2352pQosPortDSCPPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pQosPortDSCPEntry 1 } gs2352pQosPortDSCPIngressTranslate OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Configure DSCP ingress translation mode. 0: disable, 1: enable, default: disable. " ::= { gs2352pQosPortDSCPEntry 2 } gs2352pQosPortDSCPIngressClassify OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Classification for a port have 4 different values. range: 0-3, 0: disable,No Ingress DSCP Classification. 1: DSCP=0,Classify if incoming (or translated if enabled) DSCP is 0. 2: Selected,Classify only selected DSCP for which classification is enabled as specified in DSCP Translation window for the specific DSCP. 3: All,Classify all DSCP. default: disable. " ::= { gs2352pQosPortDSCPEntry 3 } gs2352pQosPortDSCPEgressRewrite OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), remap(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Configure the port egress rewriting mode. range: 0-2 0: Disable,No Egress rewrite. 1: Enable, Rewrite enabled without remapping. 2: Remap , DSCP from analyzer is remapped and frame is remarked with remapped DSCP value. default: disable. " ::= { gs2352pQosPortDSCPEntry 4 } gs2352pQosDSCPTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PQosDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the basic QoS DSCP based QoS Ingress Classification settings for all switches. " ::= { gs2352pQos 6 } gs2352pQosDSCPEntry OBJECT-TYPE SYNTAX GS2352PQosDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pQosDSCPList } ::= { gs2352pQosDSCPTable 1 } GS2352PQosDSCPEntry ::= SEQUENCE { gs2352pQosDSCPList Integer32, gs2352pQosDSCP DisplayString, gs2352pQosDSCPTrust INTEGER, gs2352pQosDSCPQosClass Integer32, gs2352pQosDSCPDPL INTEGER } gs2352pQosDSCPList OBJECT-TYPE SYNTAX Integer32(1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION " DSCP mapping table index(1-64). " ::= { gs2352pQosDSCPEntry 1 } gs2352pQosDSCP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of supported DSCP values are 64." ::= { gs2352pQosDSCPEntry 2 } gs2352pQosDSCPTrust OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Controls whether a specific DSCP value is trusted. Only frames with trusted DSCP values are mapped to a specific QoS class and Drop Precedence Level. Frames with untrusted DSCP values are treated as a non-IP frame. 0: disable, 1: enable, default: disable. " ::= { gs2352pQosDSCPEntry 3 } gs2352pQosDSCPQosClass OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " QoS class. range: 0-7, default: 0. " ::= { gs2352pQosDSCPEntry 4 } gs2352pQosDSCPDPL OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Drop Precedence Level. range: 0-3, default: disable. " ::= { gs2352pQosDSCPEntry 5 } gs2352pQosDSCPTranslationTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PQosDSCPTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the basic QoS DSCP Translation settings for all switches. " ::= { gs2352pQos 7 } gs2352pQosDSCPTranslationEntry OBJECT-TYPE SYNTAX GS2352PQosDSCPTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pQosDSCPTranslationList } ::= { gs2352pQosDSCPTranslationTable 1 } GS2352PQosDSCPTranslationEntry ::= SEQUENCE { gs2352pQosDSCPTranslationList Integer32, gs2352pQosDSCPTranslationDSCPBasedId DisplayString, gs2352pQosDSCPTranslationIngressTranslate Integer32, gs2352pQosDSCPTranslationIngressClassify INTEGER, gs2352pQosDSCPTranslationEgressRemap Integer32 } gs2352pQosDSCPTranslationList OBJECT-TYPE SYNTAX Integer32(1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION " DSCP translation table index(1-64). " ::= { gs2352pQosDSCPTranslationEntry 1 } gs2352pQosDSCPTranslationDSCPBasedId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Configure global ingress DSCP translation table. " ::= { gs2352pQosDSCPTranslationEntry 2 } gs2352pQosDSCPTranslationIngressTranslate OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION " DSCP at Ingress side can be translated to any of DSCP values. range: 0-63, default: 0. " ::= { gs2352pQosDSCPTranslationEntry 3 } gs2352pQosDSCPTranslationIngressClassify OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Configure DSCP ingress classification. 0: disable, 1: enable, default: disable. " ::= { gs2352pQosDSCPTranslationEntry 4 } gs2352pQosDSCPTranslationEgressRemap OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION " Select the DSCP value from select menu to which you want to remap. range: 0-63, default: 0. " ::= { gs2352pQosDSCPTranslationEntry 5 } gs2352pQosDSCPClassificationTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PQosDSCPClassificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the mapping of QoS class to DSCP value. " ::= { gs2352pQos 8 } gs2352pQosDSCPClassificationEntry OBJECT-TYPE SYNTAX GS2352PQosDSCPClassificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pQosDSCPClassificationQoSClass } ::= { gs2352pQosDSCPClassificationTable 1 } GS2352PQosDSCPClassificationEntry ::= SEQUENCE { gs2352pQosDSCPClassificationQoSClass INTEGER, gs2352pQosDSCPClassificationDSCP Integer32 } gs2352pQosDSCPClassificationQoSClass OBJECT-TYPE SYNTAX INTEGER { class0(1), class1(2), class2(3), class3(4), class4(5), class5(6), class6(7), class7(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " Actual QoS class. Index 1~8 mean Qos Class 0~7." ::= { gs2352pQosDSCPClassificationEntry 1 } gs2352pQosDSCPClassificationDSCP OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION " Select the classified DSCP value. range: 0-63, default: 0. " ::= { gs2352pQosDSCPClassificationEntry 3 } gs2352pQosControlList OBJECT IDENTIFIER ::= { gs2352pQos 9 } gs2352pQosQceCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create an Qos entry" ::= { gs2352pQosControlList 1 } gs2352pQosQceTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PQosQceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create Qos QCE entry. " ::= { gs2352pQosControlList 2 } gs2352pQosQceEntry OBJECT-TYPE SYNTAX GS2352PQosQceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pQosQceIndex } ::= { gs2352pQosQceTable 1 } GS2352PQosQceEntry ::= SEQUENCE { gs2352pQosQceIndex Integer32, gs2352pQosQceID Integer32, gs2352pQosQceNextID Integer32, gs2352pQosQcePortMembers DisplayString, gs2352pQosQceTag DisplayString, gs2352pQosQceVID DisplayString, gs2352pQosPCP DisplayString, gs2352pQosDEI DisplayString, gs2352pQosSMAC DisplayString, gs2352pQosDMACType DisplayString, gs2352pQosFrameType INTEGER, gs2352pQosMacEtherType DisplayString, gs2352pQosLLCSSAPAddr DisplayString, gs2352pQosLLCDSAPAddr DisplayString, gs2352pQosLLCControl DisplayString, gs2352pQosSNAPPID DisplayString, gs2352pQosIpv4Protocol DisplayString, gs2352pQosIpv4ProtocolValue Integer32, gs2352pQosIpv4ProtocolUDPSport DisplayString, gs2352pQosIpv4ProtocolUDPDport DisplayString, gs2352pQosIpv4ProtocolTCPSport DisplayString, gs2352pQosIpv4ProtocolTCPDport DisplayString, gs2352pQosIpv4SourceIp DisplayString, gs2352pQosIpv4SourceMask DisplayString, gs2352pQosIpv4IPFragment INTEGER, gs2352pQosIpv4DSCP DisplayString, gs2352pQosIpv6Protocol DisplayString, gs2352pQosIpv6ProtocolValue Integer32, gs2352pQosIpv6ProtocolUDPSport DisplayString, gs2352pQosIpv6ProtocolUDPDport DisplayString, gs2352pQosIpv6ProtocolTCPSport DisplayString, gs2352pQosIpv6ProtocolTCPDport DisplayString, gs2352pQosIpv6SourceIp DisplayString, gs2352pQosIpv6SourceMask DisplayString, gs2352pQosIpv6DSCP DisplayString, gs2352pQosActionClass Integer32, gs2352pQosActionDPL INTEGER, gs2352pQosActionDSCP Integer32, gs2352pQosQceRowStatus INTEGER } gs2352pQosQceIndex OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pQosQceEntry 1 } gs2352pQosQceID OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS read-write STATUS current DESCRIPTION " If the QCE ID is specified and an entry with this QCE ID already exists, the QCE will be modified. Otherwise, a new QCE will be added. range : 1 - 256. " ::= { gs2352pQosQceEntry 2 } gs2352pQosQceNextID OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS read-write STATUS current DESCRIPTION " If the next QCE ID is non zero, the QCE will be placed before this QCE in the list. If the next QCE ID is zero, the QCE will be placed last in the list. range : 1 - 256. " ::= { gs2352pQosQceEntry 3 } gs2352pQosQcePortMembers OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the ingress port of the QCE. Possible values are: All: The QCE will match all ingress port. Port: The QCE will match a specific ingress port.Format: 1,3-6." ::= { gs2352pQosQceEntry 4 } gs2352pQosQceTag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Value of Tag field can be 'Any', 'Untag' or 'Tag'. " ::= { gs2352pQosQceEntry 5 } gs2352pQosQceVID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Valid value of VLAN ID can be any value in 'Specific 1~4094' or 'range 1-4094' or 'Any'. " ::= { gs2352pQosQceEntry 6 } gs2352pQosPCP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'. " ::= { gs2352pQosQceEntry 7 } gs2352pQosDEI OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or 'Any'. " ::= { gs2352pQosQceEntry 8 } gs2352pQosSMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Source MAC address: 24 MS bits OUI(00-00-00 ~ FF-FF-FF) or 'Any'. " ::= { gs2352pQosQceEntry 9 } gs2352pQosDMACType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Destination MAC type: possible values are 'UC'(unicast), 'MC'(multicast), 'BC'(broadcast) or 'Any'. " ::= { gs2352pQosQceEntry 10 } gs2352pQosFrameType OBJECT-TYPE SYNTAX INTEGER { any(1), ethernet(2), llc(3), snap(4), ipv4(5), ipv6(6) } MAX-ACCESS read-write STATUS current DESCRIPTION " Frame Type can have any of the following values: 1: Any, 2: Ethernet, 3: LLC, 4: SNAP, 5: IPv4, 6: IPv6. " ::= { gs2352pQosQceEntry 11 } gs2352pQosMacEtherType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Valid ethernet type can have a value within 0x600-0xFFFF or 'Any' , but excluding 0x800(IPv4) and 0x86DD(IPv6), range: 0000-FFFF, default: Any." ::= { gs2352pQosQceEntry 12 } gs2352pQosLLCSSAPAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Valid SSAP(Source Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any. " ::= { gs2352pQosQceEntry 13 } gs2352pQosLLCDSAPAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Valid DSAP(Destination Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any. " ::= { gs2352pQosQceEntry 14 } gs2352pQosLLCControl OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Valid Control field can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any. " ::= { gs2352pQosQceEntry 15 } gs2352pQosSNAPPID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any', range: 0000-FFFF, default: Any. " ::= { gs2352pQosQceEntry 16 } gs2352pQosIpv4Protocol OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " IP protocol number: (Other, TCP or UDP) or 'Any'. " ::= { gs2352pQosQceEntry 17 } gs2352pQosIpv4ProtocolValue OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " Ipv4 Protocol is Other. range: 0-255 default: 0. " ::= { gs2352pQosQceEntry 18 } gs2352pQosIpv4ProtocolUDPSport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. " ::= { gs2352pQosQceEntry 19 } gs2352pQosIpv4ProtocolUDPDport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. " ::= { gs2352pQosQceEntry 20 } gs2352pQosIpv4ProtocolTCPSport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. " ::= { gs2352pQosQceEntry 21 } gs2352pQosIpv4ProtocolTCPDport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. " ::= { gs2352pQosQceEntry 22 } gs2352pQosIpv4SourceIp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Specific Source IP address in value format or value 0.0.0.0 is 'Any'. if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'. (x.y.z.w),x=0 unless y.z.w also 0,x not is 127 or greater than 223." ::= { gs2352pQosQceEntry 23 } gs2352pQosIpv4SourceMask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Specific Source IP address in mask format or value 0.0.0.0 is 'Any'. " ::= { gs2352pQosQceEntry 24 } gs2352pQosIpv4IPFragment OBJECT-TYPE SYNTAX INTEGER { any(0), no(1), yes(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " IPv4 frame fragmented option: 2: yes, 1: no, 0: any. " ::= { gs2352pQosQceEntry 25 } gs2352pQosIpv4DSCP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63. " ::= { gs2352pQosQceEntry 26 } gs2352pQosIpv6Protocol OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " IP protocol number: (Other, TCP or UDP) or 'Any'. " ::= { gs2352pQosQceEntry 27 } gs2352pQosIpv6ProtocolValue OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " when IPv6 protocol is Other , range: 0-255. " ::= { gs2352pQosQceEntry 28 } gs2352pQosIpv6ProtocolUDPSport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. " ::= { gs2352pQosQceEntry 29 } gs2352pQosIpv6ProtocolUDPDport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. " ::= { gs2352pQosQceEntry 30 } gs2352pQosIpv6ProtocolTCPSport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. " ::= { gs2352pQosQceEntry 31 } gs2352pQosIpv6ProtocolTCPDport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. " ::= { gs2352pQosQceEntry 32 } gs2352pQosIpv6SourceIp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " IPv6 source address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits. " ::= { gs2352pQosQceEntry 33 } gs2352pQosIpv6SourceMask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits. " ::= { gs2352pQosQceEntry 34 } gs2352pQosIpv6DSCP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43. " ::= { gs2352pQosQceEntry 35 } gs2352pQosActionClass OBJECT-TYPE SYNTAX Integer32(0..8) MAX-ACCESS read-write STATUS current DESCRIPTION " QoS class: (0-7) or 8: Default." ::= { gs2352pQosQceEntry 36 } gs2352pQosActionDPL OBJECT-TYPE SYNTAX INTEGER (0..4) MAX-ACCESS read-write STATUS current DESCRIPTION " DP Valid Drop Precedence Level can be (0-3) or 4: Default. " ::= { gs2352pQosQceEntry 37 } gs2352pQosActionDSCP OBJECT-TYPE SYNTAX Integer32(0..64) MAX-ACCESS read-write STATUS current DESCRIPTION " Valid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or 64: Default. " ::= { gs2352pQosQceEntry 38 } gs2352pQosQceRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " 1: active 2: notInservice 4: destroy" ::= { gs2352pQosQceEntry 39 } gs2352pQosQceMoveID OBJECT-TYPE SYNTAX Integer32(0..256) MAX-ACCESS read-write STATUS current DESCRIPTION " Move Qos, default: 0 Qos ID must be exist. range : 0 - 256." ::= { gs2352pQosControlList 3 } gs2352pQosQceMoveNextID OBJECT-TYPE SYNTAX Integer32(0..256) MAX-ACCESS read-write STATUS current DESCRIPTION " Move Qos, default: 0 If the next Qos ID is non zero, the Qos will be placed before this Qos in the list. If the next Qos ID is zero,the Qos will be placed last in the list. range : 0 - 256. " ::= { gs2352pQosControlList 4 } gs2352pQosQCLStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PQosQCLStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the basic QoS DSCP Translation settings for all switches. " ::= { gs2352pQos 10 } gs2352pQosQCLStatusEntry OBJECT-TYPE SYNTAX GS2352PQosQCLStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pQosQCLStatusList } ::= { gs2352pQosQCLStatusTable 1 } GS2352PQosQCLStatusEntry ::= SEQUENCE { gs2352pQosQCLStatusList Integer32, gs2352pQosQCLStatusUser DisplayString, gs2352pQosQCLStatusQCEId DisplayString, gs2352pQosQCLStatusFrameType DisplayString, gs2352pQosQCLStatusPortlist DisplayString, gs2352pQosQCLStatusActionClass DisplayString, gs2352pQosQCLStatusActionDPL DisplayString, gs2352pQosQCLStatusActionDSCP DisplayString, gs2352pQosQCLStatusActionConflict DisplayString } gs2352pQosQCLStatusList OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " QCL table index. " ::= { gs2352pQosQCLStatusEntry 1} gs2352pQosQCLStatusUser OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the QCL user. " ::= { gs2352pQosQCLStatusEntry 2 } gs2352pQosQCLStatusQCEId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the index of QCE. " ::= { gs2352pQosQCLStatusEntry 3} gs2352pQosQCLStatusFrameType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the type of frame to look for incomming frames. Any: The QCE will match all frame type. Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed. LLC: Only (LLC) frames are allowed. SNAP: Only (SNAP) frames are allowed. IPv4: The QCE will match only IPV4 frames. IPv6: The QCE will match only IPV6 frames." ::= { gs2352pQosQCLStatusEntry 4} gs2352pQosQCLStatusPortlist OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the list of ports configured with the QCE. " ::= { gs2352pQosQCLStatusEntry 5} gs2352pQosQCLStatusActionClass OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Classified QoS class; if a frame matches the QCE it will be put in the queue. " ::= { gs2352pQosQCLStatusEntry 6} gs2352pQosQCLStatusActionDPL OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Drop Precedence Level; if a frame matches the QCE then DP level will set to value displayed under DPL column." ::= { gs2352pQosQCLStatusEntry 7} gs2352pQosQCLStatusActionDSCP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " If a frame matches the QCE then DSCP will be classified with the value displayed under DSCP column." ::= { gs2352pQosQCLStatusEntry 8} gs2352pQosQCLStatusActionConflict OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " If a frame matches the QCE then DSCP will be classified with the value displayed under DSCP column. " ::= { gs2352pQosQCLStatusEntry 9} gs2352pQosStormControl OBJECT IDENTIFIER ::= { gs2352pQos 11 } gs2352pQosStormControlTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PQosStormControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the basic QoS DSCP Translation settings for all switches. " ::= { gs2352pQosStormControl 1 } gs2352pQosStormControlEntry OBJECT-TYPE SYNTAX GS2352PQosStormControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pQosStormControlPort } ::= { gs2352pQosStormControlTable 1 } GS2352PQosStormControlEntry ::= SEQUENCE { gs2352pQosStormControlPort Integer32, gs2352pQosStormControlUnicastEnabled INTEGER, gs2352pQosStormControlUnicastRate Integer32, gs2352pQosStormControlUnicastUnit INTEGER, gs2352pQosStormControlBroadcastEnabled INTEGER, gs2352pQosStormControlBroadcastRate Integer32, gs2352pQosStormControlBroadcastUnit INTEGER, gs2352pQosStormControlUnknownEnabled INTEGER, gs2352pQosStormControlUnknownRate Integer32, gs2352pQosStormControlUnknownUnit INTEGER } gs2352pQosStormControlPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pQosStormControlEntry 1 } gs2352pQosStormControlUnicastEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Controls whether the storm control is enabled on this switch port. 0: disable, 1: enable, default: disable. " ::= { gs2352pQosStormControlEntry 2 } gs2352pQosStormControlUnicastRate OBJECT-TYPE SYNTAX Integer32(100..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the rate for the unicast storm control. range: 100-10000000(kbps/fps), default: 500(kbps). " ::= { gs2352pQosStormControlEntry 3 } gs2352pQosStormControlUnicastUnit OBJECT-TYPE SYNTAX INTEGER { kbps(0), fps(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the unit of measure for the unicast storm control rate. 0: kbps, 1: fps, default: kbps. " ::= { gs2352pQosStormControlEntry 4 } gs2352pQosStormControlBroadcastEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Controls whether the storm control is enabled on this switch port. 0: disable, 1: enable, default: disable. " ::= { gs2352pQosStormControlEntry 5 } gs2352pQosStormControlBroadcastRate OBJECT-TYPE SYNTAX Integer32(100..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the rate for the broadcast storm control. range: 100-10000000(kbps/fps), default: 500(kbps). " ::= { gs2352pQosStormControlEntry 6 } gs2352pQosStormControlBroadcastUnit OBJECT-TYPE SYNTAX INTEGER { kbps(0), fps(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the unit of measure for the broadcast storm control rate. 0: kbps, 1: fps, default: kbps. " ::= { gs2352pQosStormControlEntry 7 } gs2352pQosStormControlUnknownEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Controls whether the storm control is enabled on this switch port. 0: disable, 1: enable, default: disable. " ::= { gs2352pQosStormControlEntry 8 } gs2352pQosStormControlUnknownRate OBJECT-TYPE SYNTAX Integer32(100..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the rate for the multicast storm control. range: 100-10000000(kbps/fps), default: 500(kbps). " ::= { gs2352pQosStormControlEntry 9 } gs2352pQosStormControlUnknownUnit OBJECT-TYPE SYNTAX INTEGER { kbps(0), fps(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the unit of measure for the multicast storm control rate. 0: kbps, 1: fps, default: kbps. " ::= { gs2352pQosStormControlEntry 10 } gs2352pQosWREDTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PQosWREDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the Random Early Detection (RED) settings for queue. " ::= { gs2352pQos 12 } gs2352pQosWREDEntry OBJECT-TYPE SYNTAX GS2352PQosWREDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pQosWREDQueueList } ::= { gs2352pQosWREDTable 1 } GS2352PQosWREDEntry ::= SEQUENCE { gs2352pQosWREDQueueList Integer32, gs2352pQosWREDQueue INTEGER, gs2352pQosWREDMinThreshold Integer32, gs2352pQosWREDMaxDP1 Integer32, gs2352pQosWREDMaxDP2 Integer32, gs2352pQosWREDMaxDP3 Integer32 } gs2352pQosWREDQueueList OBJECT-TYPE SYNTAX Integer32(1..6) MAX-ACCESS not-accessible STATUS current DESCRIPTION " The queue number (QoS class) for which the configuration below applies. Index 1~6 mean Queue 0~5." ::= { gs2352pQosWREDEntry 1 } gs2352pQosWREDQueue OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Controls whether RED(Random Early Detection) for this queue. 0: Disable, 1: Enable, default: Disable. " ::= { gs2352pQosWREDEntry 2 } gs2352pQosWREDMinThreshold OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the lower RED(Random Early Detection) threshold. If the average queue filling level is below this threshold, the drop probability is zero. range: 0-100" ::= { gs2352pQosWREDEntry 3 } gs2352pQosWREDMaxDP1 OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the drop probability for frames marked with Drop Precedence Level 1 when the average queue filling level is 100%. range: 0-100, default: 1. " ::= { gs2352pQosWREDEntry 4 } gs2352pQosWREDMaxDP2 OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the drop probability for frames marked with Drop Precedence Level 2 when the average queue filling level is 100%. range: 0-100, default: 5. " ::= { gs2352pQosWREDEntry 5 } gs2352pQosWREDMaxDP3 OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the drop probability for frames marked with Drop Precedence Level 3 when the average queue filling level is 100%. range: 0-100, default: 10. " ::= { gs2352pQosWREDEntry 6 } gs2352pVlan OBJECT IDENTIFIER ::= { gs2352pConfiguration 15 } gs2352pVlanPorts OBJECT IDENTIFIER ::= { gs2352pVlan 1 } gs2352pVlanPortsTPIDforCustomSport OBJECT-TYPE SYNTAX OCTET STRING(SIZE(2)) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the TPID used for Custom S-ports. This is a global setting for all the Custom S-ports. range: 0x0600-0xffff, default: 0x88a8. " ::= { gs2352pVlanPorts 1 } gs2352pVlanPortsTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PVlanPortsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure Vlan ports Configuration mode. " ::= { gs2352pVlanPorts 2 } gs2352pVlanPortsEntry OBJECT-TYPE SYNTAX GS2352PVlanPortsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pVlanPortsPort } ::= { gs2352pVlanPortsTable 1 } GS2352PVlanPortsEntry ::= SEQUENCE { gs2352pVlanPortsPort Integer32, gs2352pVlanPortsNativeVLAN Integer32, gs2352pVlanPortsFrameType INTEGER, gs2352pVlanPortsIngressFilter INTEGER, gs2352pVlanPortsEgressRule INTEGER, gs2352pVlanPortsPortType INTEGER } gs2352pVlanPortsPort OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pVlanPortsEntry 1 } gs2352pVlanPortsNativeVLAN OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure native VLAN ID. range: 1-4094, default: 1. " ::= { gs2352pVlanPortsEntry 2 } gs2352pVlanPortsFrameType OBJECT-TYPE SYNTAX INTEGER { all(0), tagged(1), untagged(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure frame type of switch ports. 0: all, 1: tagged, 2: untagged, default: all. " ::= { gs2352pVlanPortsEntry 3 } gs2352pVlanPortsIngressFilter OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure ingress filtering of switch ports. 0: disable, 1: enable, default:disable . " ::= { gs2352pVlanPortsEntry 4 } gs2352pVlanPortsEgressRule OBJECT-TYPE SYNTAX INTEGER { access(0), hybrid(1), trunk(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure egress-rule of switch ports. 0: access, 1: hybrid, 2: trunk" ::= { gs2352pVlanPortsEntry 5 } gs2352pVlanPortsPortType OBJECT-TYPE SYNTAX INTEGER { cPort(0), sCustomPort(1), sPort(2), unaware(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure port type of switch ports. 0: c-port, 1: s-custom-port, 2: s-port, 3: unaware. default: c-port. " ::= { gs2352pVlanPortsEntry 6 } gs2352pVlanPrivateVLAN OBJECT IDENTIFIER ::= { gs2352pVlan 2 } gs2352pVlanPortIsolationTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pVlanPortIsolationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure Vlan Port Isolation Configuration. " ::= { gs2352pVlanPrivateVLAN 2 } gs2352pVlanPortIsolationEntry OBJECT-TYPE SYNTAX Gs2352pVlanPortIsolationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pVlanPortIsolationPort } ::= { gs2352pVlanPortIsolationTable 1 } Gs2352pVlanPortIsolationEntry ::= SEQUENCE { gs2352pVlanPortIsolationPort Integer32, gs2352pVlanPortIsolation INTEGER } gs2352pVlanPortIsolationPort OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pVlanPortIsolationEntry 1 } gs2352pVlanPortIsolation OBJECT-TYPE SYNTAX INTEGER{ disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:disable 1:enable" ::= { gs2352pVlanPortIsolationEntry 2 } gs2352pMACbasedVLAN OBJECT IDENTIFIER ::= { gs2352pVlan 3 } gs2352pMACbasedVLANConf OBJECT IDENTIFIER ::= { gs2352pMACbasedVLAN 1 } gs2352pMACbasedVLANConfCreate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create MAC base vlan" ::= { gs2352pMACbasedVLANConf 1 } gs2352pMACbasedVLANConfTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pMACbasedVLANConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure Vlan Port Isolation Configuration. " ::= { gs2352pMACbasedVLANConf 2 } gs2352pMACbasedVLANConfEntry OBJECT-TYPE SYNTAX Gs2352pMACbasedVLANConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pMACbasedVLANIndex } ::= { gs2352pMACbasedVLANConfTable 1 } Gs2352pMACbasedVLANConfEntry ::= SEQUENCE { gs2352pMACbasedVLANIndex Integer32, gs2352pMACbasedVLANMACAddress MacAddress, gs2352pMACbasedVLANID Integer32, gs2352pMACbasedMemberships DisplayString, gs2352pMACbaseRowStatus INTEGER } gs2352pMACbasedVLANIndex OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the VLAN ID. " ::= { gs2352pMACbasedVLANConfEntry 1 } gs2352pMACbasedVLANMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the MAC address. The CreateEntry can be modify, the other entry can't be modify." ::= { gs2352pMACbasedVLANConfEntry 2 } gs2352pMACbasedVLANID OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the VLAN ID. " ::= { gs2352pMACbasedVLANConfEntry 3 } gs2352pMACbasedMemberships OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The ports are displayed for each MAC-based VLAN entry. To include the port in a MAC-based VLAN" ::= { gs2352pMACbasedVLANConfEntry 4 } gs2352pMACbaseRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy" ::= { gs2352pMACbasedVLANConfEntry 5 } gs2352pIGMPSnooping OBJECT IDENTIFIER ::= { gs2352pConfiguration 16 } gs2352pIGMPSnoopingBasic OBJECT IDENTIFIER ::= { gs2352pIGMPSnooping 1 } gs2352pIGMPSnoopingEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the Global IGMP Snooping" ::= { gs2352pIGMPSnoopingBasic 1 } gs2352pIGMPSnoopingUnregisteredIPMCv4Flooding OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable unregistered IPMCv4 traffic flooding. " ::= { gs2352pIGMPSnoopingBasic 2 } gs2352pIGMPSnoopingSSMIPRangeAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers run the SSM service model for the groups in the address range. " ::= { gs2352pIGMPSnoopingBasic 3 } gs2352pIGMPSnoopingSSMIPRangeValue OBJECT-TYPE SYNTAX Integer32(4..32) MAX-ACCESS read-write STATUS current DESCRIPTION "SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers run the SSM service model for the groups in the address range value. " ::= { gs2352pIGMPSnoopingBasic 4 } gs2352pIGMPSnoopingProxyEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable IGMP Proxy. This feature can be used to avoid forwarding unnecessary join and leave messages to the router side. " ::= { gs2352pIGMPSnoopingBasic 5 } gs2352pIGMPSnoopingPortRelatedTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pIGMPSnoopingPortRelatedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure IGMP Snooping Port Related Configuration. " ::= { gs2352pIGMPSnoopingBasic 6 } gs2352pIGMPSnoopingPortRelatedEntry OBJECT-TYPE SYNTAX Gs2352pIGMPSnoopingPortRelatedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex } ::= { gs2352pIGMPSnoopingPortRelatedTable 1 } Gs2352pIGMPSnoopingPortRelatedEntry ::= SEQUENCE { gs2352pIGMPSnoopingRouterPort INTEGER, gs2352pIGMPSnoopingFastLeave INTEGER, gs2352pIGMPSnoopingThrottling Integer32 } gs2352pIGMPSnoopingRouterPort OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify which ports act as router ports. A router port is a port on the Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. If an aggregation member port is selected as a router port, the whole aggregation will act as a router port. " ::= { gs2352pIGMPSnoopingPortRelatedEntry 1 } gs2352pIGMPSnoopingFastLeave OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the fast leave on the port. " ::= { gs2352pIGMPSnoopingPortRelatedEntry 2 } gs2352pIGMPSnoopingThrottling OBJECT-TYPE SYNTAX Integer32(0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Enable to limit the number of multicast groups to which a switch port can belong. 0: unlimited" ::= { gs2352pIGMPSnoopingPortRelatedEntry 3 } gs2352pIGMPSnoopingVLANTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pIGMPSnoopingVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure IGMP Snooping Vlan Configuration. " ::= { gs2352pIGMPSnooping 2 } gs2352pIGMPSnoopingVLANEntry OBJECT-TYPE SYNTAX Gs2352pIGMPSnoopingVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pIGMPSnoopingVLANID } ::= { gs2352pIGMPSnoopingVLANTable 1 } Gs2352pIGMPSnoopingVLANEntry ::= SEQUENCE { gs2352pIGMPSnoopingVLANID Integer32, gs2352pIGMPSnoopingVLANEnable INTEGER, gs2352pIGMPSnoopingVLANIGMPQuerier INTEGER, gs2352pIGMPSnoopingVLANCompatibility INTEGER, gs2352pIGMPSnoopingVLANRV Integer32, gs2352pIGMPSnoopingVLANQI Integer32, gs2352pIGMPSnoopingVLANQRI Integer32, gs2352pIGMPSnoopingVLANLLQI Integer32, gs2352pIGMPSnoopingVLANURI Integer32 } gs2352pIGMPSnoopingVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN ID of the entry" ::= { gs2352pIGMPSnoopingVLANEntry 1 } gs2352pIGMPSnoopingVLANEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the per-VLAN IGMP Snooping. Up to 32 VLANs can be selected for IGMP Snooping. " ::= { gs2352pIGMPSnoopingVLANEntry 2 } gs2352pIGMPSnoopingVLANIGMPQuerier OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the IGMP Querier in the VLAN. " ::= { gs2352pIGMPSnoopingVLANEntry 3 } gs2352pIGMPSnoopingVLANCompatibility OBJECT-TYPE SYNTAX INTEGER { igmpAuto(0), forcedIGMPv1(1), forcedIGMPv2(2), forcedIGMPv3(3), none(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Compatibility is maintained by hosts and routers taking appropriate actions depending on the versions of IGMP operating on hosts and routers within a network. The allowed selection is IGMP-Auto, Forced IGMPv1, Forced IGMPv2, Forced IGMPv3, default compatibility value is IGMP-Auto. " ::= { gs2352pIGMPSnoopingVLANEntry 4 } gs2352pIGMPSnoopingVLANRV OBJECT-TYPE SYNTAX Integer32(-1|1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Robustness Variable. The Robustness Variable allows tuning for the expected packet loss on a network. The allowed range is 1 to 255, default robustness variable value is 2. (-1: none)" ::= { gs2352pIGMPSnoopingVLANEntry 5 } gs2352pIGMPSnoopingVLANQI OBJECT-TYPE SYNTAX Integer32(-1|1..31744) MAX-ACCESS read-write STATUS current DESCRIPTION "Query Interval. The Query Interval is the interval between General Queries sent by the Querier. The allowed range is 1 to 31744 seconds, default query interval is 125 seconds. (-1: none)" ::= { gs2352pIGMPSnoopingVLANEntry 6 } gs2352pIGMPSnoopingVLANQRI OBJECT-TYPE SYNTAX Integer32(-1|0..31744) MAX-ACCESS read-write STATUS current DESCRIPTION "Query Response Interval. The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. The allowed range is 0 to 31744 in tenths of seconds, default query response interval is 100 in tenths of seconds (10 seconds). (-1: none)" ::= { gs2352pIGMPSnoopingVLANEntry 7 } gs2352pIGMPSnoopingVLANLLQI OBJECT-TYPE SYNTAX Integer32(-1|0..31744) MAX-ACCESS read-write STATUS current DESCRIPTION "LLQI (LMQI for IGMP). Last Member Query Interval. The Last Member Query Time is the time value represented by the Last Member Query Interval, multiplied by the Last Member Query Count. The allowed range is 0 to 31744 in tenths of seconds, default last member query interval is 10 in tenths of seconds (1 second). (-1: none)" ::= { gs2352pIGMPSnoopingVLANEntry 8 } gs2352pIGMPSnoopingVLANURI OBJECT-TYPE SYNTAX Integer32(-1|0..31744) MAX-ACCESS read-write STATUS current DESCRIPTION "Unsolicited Report Interval. The Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group. The allowed range is 0 to 31744 seconds, default unsolicited report interval is 1 second. (-1: none)" ::= { gs2352pIGMPSnoopingVLANEntry 9 } gs2352pIGMPSnoopingPortGroupFiltering OBJECT IDENTIFIER ::= { gs2352pIGMPSnooping 3 } gs2352pIGMPSnoopingPortGroupFilteringCreate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create IGMP Snooping Port Group Filtering " ::= { gs2352pIGMPSnoopingPortGroupFiltering 1 } gs2352pIGMPSnoopingPortGroupFilteringTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pIGMPSnoopingPortGroupFilteringEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure IGMP Snooping port group filtering. " ::= { gs2352pIGMPSnoopingPortGroupFiltering 2 } gs2352pIGMPSnoopingPortGroupFilteringEntry OBJECT-TYPE SYNTAX Gs2352pIGMPSnoopingPortGroupFilteringEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pIGMPSnoopingPortGroupFilteringIndex } ::= { gs2352pIGMPSnoopingPortGroupFilteringTable 1 } Gs2352pIGMPSnoopingPortGroupFilteringEntry ::= SEQUENCE { gs2352pIGMPSnoopingPortGroupFilteringIndex Integer32, gs2352pIGMPSnoopingPortGroupFilteringPort Integer32, gs2352pIGMPSnoopingPortGroupFilteringGroups DisplayString, gs2352pIGMPSnoopingPortGroupFilteringRowStatus INTEGER } gs2352pIGMPSnoopingPortGroupFilteringIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IGMP Snooping Port Group Filtering Configuration Index. " ::= { gs2352pIGMPSnoopingPortGroupFilteringEntry 1 } gs2352pIGMPSnoopingPortGroupFilteringPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The logical port for the settings. " ::= { gs2352pIGMPSnoopingPortGroupFilteringEntry 2 } gs2352pIGMPSnoopingPortGroupFilteringGroups OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Group that will be filtered. " ::= { gs2352pIGMPSnoopingPortGroupFilteringEntry 3 } gs2352pIGMPSnoopingPortGroupFilteringRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy" ::= { gs2352pIGMPSnoopingPortGroupFilteringEntry 4 } gs2352pIGMPSnoopingStatus OBJECT IDENTIFIER ::= { gs2352pIGMPSnooping 4 } gs2352pIGMPSnoopingstatisticClear OBJECT-TYPE SYNTAX INTEGER { none(0), clear(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Clears all Statistics counters." ::= { gs2352pIGMPSnoopingStatus 1 } gs2352pIGMPSnoopingstatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pIGMPSnoopingstatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure Vlan Port Isolation Configuration. " ::= { gs2352pIGMPSnoopingStatus 2 } gs2352pIGMPSnoopingstatisticEntry OBJECT-TYPE SYNTAX Gs2352pIGMPSnoopingstatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pIGMPSnoopingstatisticVLANID } ::= { gs2352pIGMPSnoopingstatisticTable 1 } Gs2352pIGMPSnoopingstatisticEntry ::= SEQUENCE { gs2352pIGMPSnoopingstatisticVLANID Integer32, gs2352pIGMPSnoopingstatisticQuerierVersion DisplayString, gs2352pIGMPSnoopingstatisticHostVersion DisplayString, gs2352pIGMPSnoopingstatisticQuerierStatus DisplayString, gs2352pIGMPSnoopingstatisticQueriesTransmitted Counter32, gs2352pIGMPSnoopingstatisticQueriesReceived Counter32, gs2352pIGMPSnoopingstatisticV1ReportsReceived Counter32, gs2352pIGMPSnoopingstatisticV2ReportsReceived Counter32, gs2352pIGMPSnoopingstatisticV3ReportsReceived Counter32, gs2352pIGMPSnoopingstatisticV2LeavesReceived Counter32 } gs2352pIGMPSnoopingstatisticVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID of the entry. " ::= { gs2352pIGMPSnoopingstatisticEntry 1 } gs2352pIGMPSnoopingstatisticQuerierVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Working Querier Version currently. " ::= { gs2352pIGMPSnoopingstatisticEntry 2 } gs2352pIGMPSnoopingstatisticHostVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Working Host Version currently. " ::= { gs2352pIGMPSnoopingstatisticEntry 3 } gs2352pIGMPSnoopingstatisticQuerierStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the Querier status is ACTIVE or IDLE. DISABLE denotes the specific interface is administratively disabled. " ::= { gs2352pIGMPSnoopingstatisticEntry 4 } gs2352pIGMPSnoopingstatisticQueriesTransmitted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Transmitted Queries. " ::= { gs2352pIGMPSnoopingstatisticEntry 5 } gs2352pIGMPSnoopingstatisticQueriesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received Queries. " ::= { gs2352pIGMPSnoopingstatisticEntry 6 } gs2352pIGMPSnoopingstatisticV1ReportsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V1 Reports. " ::= { gs2352pIGMPSnoopingstatisticEntry 7 } gs2352pIGMPSnoopingstatisticV2ReportsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V2 Reports. " ::= { gs2352pIGMPSnoopingstatisticEntry 8 } gs2352pIGMPSnoopingstatisticV3ReportsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V3 Reports. " ::= { gs2352pIGMPSnoopingstatisticEntry 9 } gs2352pIGMPSnoopingstatisticV2LeavesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V2 Leaves. " ::= { gs2352pIGMPSnoopingstatisticEntry 10 } gs2352pIGMPSnoopingRouterPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pIGMPSnoopingRouterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure Vlan Port Isolation Configuration. " ::= { gs2352pIGMPSnoopingStatus 3 } gs2352pIGMPSnoopingRouterPortEntry OBJECT-TYPE SYNTAX Gs2352pIGMPSnoopingRouterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex } ::= { gs2352pIGMPSnoopingRouterPortTable 1 } Gs2352pIGMPSnoopingRouterPortEntry ::= SEQUENCE { gs2352pIGMPSnoopingRouterPortStatus DisplayString } gs2352pIGMPSnoopingRouterPortStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Display which ports act as router ports. A router port is a port on the Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. Static denotes the specific port is configured to be a router port. Dynamic denotes the specific port is learnt to be a router port. Both denote the specific port is configured or learnt to be a router port. " ::= { gs2352pIGMPSnoopingRouterPortEntry 1 } gs2352pIGMPSnoopingGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pIGMPSnoopingGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IGMP Snooping Groups Information . " ::= { gs2352pIGMPSnooping 5 } gs2352pIGMPSnoopingGroupsEntry OBJECT-TYPE SYNTAX Gs2352pIGMPSnoopingGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pIGMPSnoopingGroupsIndex } ::= { gs2352pIGMPSnoopingGroupsTable 1 } Gs2352pIGMPSnoopingGroupsEntry ::= SEQUENCE { gs2352pIGMPSnoopingGroupsIndex Integer32, gs2352pIGMPSnoopingGroupsVLANID Integer32, gs2352pIGMPSnoopingGroups InetAddress, gs2352pIGMPSnoopingGroupsMemberships DisplayString } gs2352pIGMPSnoopingGroupsIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IGMP Snooping Groups Index" ::= { gs2352pIGMPSnoopingGroupsEntry 1 } gs2352pIGMPSnoopingGroupsVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN ID of the group. " ::= { gs2352pIGMPSnoopingGroupsEntry 2 } gs2352pIGMPSnoopingGroups OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Group address of the group displayed." ::= { gs2352pIGMPSnoopingGroupsEntry 3 } gs2352pIGMPSnoopingGroupsMemberships OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Ports under this group." ::= { gs2352pIGMPSnoopingGroupsEntry 4 } gs2352pIGMPSnoopingSSMTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pIGMPSnoopingSSMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IGMP SFM (Source-Filtered Multicast) Information Table also contains the SSM (Source-Specific Multicast) information. This table is sorted first by VLAN ID, then by group, and then by Port. Different source addresses belong to the same group are treated as single entry." ::= { gs2352pIGMPSnooping 6 } gs2352pIGMPSnoopingSSMEntry OBJECT-TYPE SYNTAX Gs2352pIGMPSnoopingSSMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pIGMPSnoopingSSMIndex } ::= { gs2352pIGMPSnoopingSSMTable 1 } Gs2352pIGMPSnoopingSSMEntry ::= SEQUENCE { gs2352pIGMPSnoopingSSMIndex Integer32, gs2352pIGMPSnoopingSSMVLANID Integer32, gs2352pIGMPSnoopingSSMGroup DisplayString, gs2352pIGMPSnoopingSSMPort Integer32, gs2352pIGMPSnoopingSSMMode DisplayString, gs2352pIGMPSnoopingSSMSourceAddress DisplayString, gs2352pIGMPSnoopingSSMType DisplayString } gs2352pIGMPSnoopingSSMIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IGMP Snooping SSM Index" ::= { gs2352pIGMPSnoopingSSMEntry 1 } gs2352pIGMPSnoopingSSMVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN ID of the group. " ::= { gs2352pIGMPSnoopingSSMEntry 2 } gs2352pIGMPSnoopingSSMGroup OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Group address of the group displayed." ::= { gs2352pIGMPSnoopingSSMEntry 3 } gs2352pIGMPSnoopingSSMPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ports under this group." ::= { gs2352pIGMPSnoopingSSMEntry 4 } gs2352pIGMPSnoopingSSMMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It can be either Include or Exclude." ::= { gs2352pIGMPSnoopingSSMEntry 5 } gs2352pIGMPSnoopingSSMSourceAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IP Address of the source. Currently, system limits the total number of IP source addresses for filtering to be 128." ::= { gs2352pIGMPSnoopingSSMEntry 6 } gs2352pIGMPSnoopingSSMType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Type. It can be either Allow or Deny." ::= { gs2352pIGMPSnoopingSSMEntry 7 } gs2352pMLDSnooping OBJECT IDENTIFIER ::= { gs2352pConfiguration 17 } gs2352pMLDSnoopingBasic OBJECT IDENTIFIER ::= { gs2352pMLDSnooping 1 } gs2352pMLDSnoopingEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the Global MLD Snooping" ::= { gs2352pMLDSnoopingBasic 1 } gs2352pMLDSnoopingUnregisteredIPMCv6Flooding OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable unregistered IPMCv6 traffic flooding. " ::= { gs2352pMLDSnoopingBasic 2 } gs2352pMLDSnoopingSSMIPRangeAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers run the SSM service model for the groups in the address range. " ::= { gs2352pMLDSnoopingBasic 3 } gs2352pMLDSnoopingSSMIPRangeValue OBJECT-TYPE SYNTAX Integer32(8..128) MAX-ACCESS read-write STATUS current DESCRIPTION "SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers run the SSM service model for the groups in the address range value. " ::= { gs2352pMLDSnoopingBasic 4 } gs2352pMLDSnoopingProxyEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable MLD Proxy. This feature can be used to avoid forwarding unnecessary join and leave messages to the router side. " ::= { gs2352pMLDSnoopingBasic 5 } gs2352pMLDSnoopingPortRelatedTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pMLDSnoopingPortRelatedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure MLD Snooping Port Related Configuration. " ::= { gs2352pMLDSnoopingBasic 6 } gs2352pMLDSnoopingPortRelatedEntry OBJECT-TYPE SYNTAX Gs2352pMLDSnoopingPortRelatedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex } ::= { gs2352pMLDSnoopingPortRelatedTable 1 } Gs2352pMLDSnoopingPortRelatedEntry ::= SEQUENCE { gs2352pMLDSnoopingRouterPort INTEGER, gs2352pMLDSnoopingFastLeave INTEGER, gs2352pMLDSnoopingThrottling Integer32 } gs2352pMLDSnoopingRouterPort OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify which ports act as router ports. A router port is a port on the Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. If an aggregation member port is selected as a router port, the whole aggregation will act as a router port. " ::= { gs2352pMLDSnoopingPortRelatedEntry 1 } gs2352pMLDSnoopingFastLeave OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the fast leave on the port. " ::= { gs2352pMLDSnoopingPortRelatedEntry 2 } gs2352pMLDSnoopingThrottling OBJECT-TYPE SYNTAX Integer32(0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Enable to limit the number of multicast groups to which a switch port can belong. 0: unlimited" ::= { gs2352pMLDSnoopingPortRelatedEntry 3 } gs2352pMLDSnoopingVLANTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pMLDSnoopingVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure MLD Snooping Vlan Configuration. " ::= { gs2352pMLDSnooping 2 } gs2352pMLDSnoopingVLANEntry OBJECT-TYPE SYNTAX Gs2352pMLDSnoopingVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pMLDSnoopingVLANID } ::= { gs2352pMLDSnoopingVLANTable 1 } Gs2352pMLDSnoopingVLANEntry ::= SEQUENCE { gs2352pMLDSnoopingVLANID Integer32, gs2352pMLDSnoopingVLANEnable INTEGER, gs2352pMLDSnoopingVLANIGMPQuerier INTEGER, gs2352pMLDSnoopingVLANCompatibility INTEGER, gs2352pMLDSnoopingVLANRV Integer32, gs2352pMLDSnoopingVLANQI Integer32, gs2352pMLDSnoopingVLANQRI Integer32, gs2352pMLDSnoopingVLANLLQI Integer32, gs2352pMLDSnoopingVLANURI Integer32 } gs2352pMLDSnoopingVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN ID of the entry" ::= { gs2352pMLDSnoopingVLANEntry 1 } gs2352pMLDSnoopingVLANEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the per-VLAN MLD Snooping. Up to 32 VLANs can be selected for MLD Snooping. " ::= { gs2352pMLDSnoopingVLANEntry 2 } gs2352pMLDSnoopingVLANIGMPQuerier OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the MLD Querier in the VLAN. " ::= { gs2352pMLDSnoopingVLANEntry 3 } gs2352pMLDSnoopingVLANCompatibility OBJECT-TYPE SYNTAX INTEGER { mldAuto(0), forcedMLDv1(1), forcedMLDv2(2), none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Compatibility is maintained by hosts and routers taking appropriate actions depending on the versions of IGMP operating on hosts and routers within a network. The allowed selection is MLD-Auto, Forced MLDv1, Forced MLDv2, default compatibility value is IGMP-Auto. " ::= { gs2352pMLDSnoopingVLANEntry 4 } gs2352pMLDSnoopingVLANRV OBJECT-TYPE SYNTAX Integer32(-1|1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Robustness Variable. The Robustness Variable allows tuning for the expected packet loss on a network. The allowed range is 1 to 255, default robustness variable value is 2. (-1: none)" ::= { gs2352pMLDSnoopingVLANEntry 5 } gs2352pMLDSnoopingVLANQI OBJECT-TYPE SYNTAX Integer32(-1|1..31744) MAX-ACCESS read-write STATUS current DESCRIPTION "Query Interval. The Query Interval is the interval between General Queries sent by the Querier. The allowed range is 1 to 31744 seconds, default query interval is 125 seconds. (-1: none)" ::= { gs2352pMLDSnoopingVLANEntry 6 } gs2352pMLDSnoopingVLANQRI OBJECT-TYPE SYNTAX Integer32(-1|0..31744) MAX-ACCESS read-write STATUS current DESCRIPTION "Query Response Interval. The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. The allowed range is 0 to 31744 in tenths of seconds, default query response interval is 100 in tenths of seconds (10 seconds). (-1: none)" ::= { gs2352pMLDSnoopingVLANEntry 7 } gs2352pMLDSnoopingVLANLLQI OBJECT-TYPE SYNTAX Integer32(-1|0..31744) MAX-ACCESS read-write STATUS current DESCRIPTION "LLQI (LMQI for MLD). Last Member Query Interval. The Last Member Query Time is the time value represented by the Last Member Query Interval, multiplied by the Last Member Query Count. The allowed range is 0 to 31744 in tenths of seconds, default last member query interval is 10 in tenths of seconds (1 second). (-1: none)" ::= { gs2352pMLDSnoopingVLANEntry 8 } gs2352pMLDSnoopingVLANURI OBJECT-TYPE SYNTAX Integer32(-1|0..31744) MAX-ACCESS read-write STATUS current DESCRIPTION "Unsolicited Report Interval. The Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group. The allowed range is 0 to 31744 seconds, default unsolicited report interval is 1 second. (-1: none)" ::= { gs2352pMLDSnoopingVLANEntry 9 } gs2352pMLDSnoopingPortGroupFiltering OBJECT IDENTIFIER ::= { gs2352pMLDSnooping 3 } gs2352pMLDSnoopingPortGroupFilteringCreate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create MLD Snooping Port Group Filtering " ::= { gs2352pMLDSnoopingPortGroupFiltering 1 } gs2352pMLDSnoopingPortGroupFilteringTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pMLDSnoopingPortGroupFilteringEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure MLD Snooping port group filtering. " ::= { gs2352pMLDSnoopingPortGroupFiltering 2 } gs2352pMLDSnoopingPortGroupFilteringEntry OBJECT-TYPE SYNTAX Gs2352pMLDSnoopingPortGroupFilteringEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pMLDSnoopingPortGroupFilteringIndex } ::= { gs2352pMLDSnoopingPortGroupFilteringTable 1 } Gs2352pMLDSnoopingPortGroupFilteringEntry ::= SEQUENCE { gs2352pMLDSnoopingPortGroupFilteringIndex Integer32, gs2352pMLDSnoopingPortGroupFilteringPort Integer32, gs2352pMLDSnoopingPortGroupFilteringGroups DisplayString, gs2352pMLDSnoopingPortGroupFilteringRowStatus INTEGER } gs2352pMLDSnoopingPortGroupFilteringIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MLD Snooping Port Group Filtering Configuration Index. " ::= { gs2352pMLDSnoopingPortGroupFilteringEntry 1 } gs2352pMLDSnoopingPortGroupFilteringPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The logical port for the settings. " ::= { gs2352pMLDSnoopingPortGroupFilteringEntry 2 } gs2352pMLDSnoopingPortGroupFilteringGroups OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Group that will be filtered. " ::= { gs2352pMLDSnoopingPortGroupFilteringEntry 3 } gs2352pMLDSnoopingPortGroupFilteringRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy" ::= { gs2352pMLDSnoopingPortGroupFilteringEntry 4 } gs2352pMLDSnoopingStatus OBJECT IDENTIFIER ::= { gs2352pMLDSnooping 4 } gs2352pMLDSnoopingstatisticClear OBJECT-TYPE SYNTAX INTEGER { none(0), clear(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Clears all Statistics counters." ::= { gs2352pMLDSnoopingStatus 1 } gs2352pMLDSnoopingstatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pMLDSnoopingstatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure Vlan Port Isolation Configuration. " ::= { gs2352pMLDSnoopingStatus 2 } gs2352pMLDSnoopingstatisticEntry OBJECT-TYPE SYNTAX Gs2352pMLDSnoopingstatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pMLDSnoopingstatisticVLANID } ::= { gs2352pMLDSnoopingstatisticTable 1 } Gs2352pMLDSnoopingstatisticEntry ::= SEQUENCE { gs2352pMLDSnoopingstatisticVLANID Integer32, gs2352pMLDSnoopingstatisticQuerierVersion DisplayString, gs2352pMLDSnoopingstatisticHostVersion DisplayString, gs2352pMLDSnoopingstatisticQuerierStatus DisplayString, gs2352pMLDSnoopingstatisticQueriesTransmitted Counter32, gs2352pMLDSnoopingstatisticQueriesReceived Counter32, gs2352pMLDSnoopingstatisticV1ReportsReceived Counter32, gs2352pMLDSnoopingstatisticV2ReportsReceived Counter32, gs2352pMLDSnoopingstatisticV1LeavesReceived Counter32 } gs2352pMLDSnoopingstatisticVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID of the entry. " ::= { gs2352pMLDSnoopingstatisticEntry 1 } gs2352pMLDSnoopingstatisticQuerierVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Working Querier Version currently. " ::= { gs2352pMLDSnoopingstatisticEntry 2 } gs2352pMLDSnoopingstatisticHostVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Working Host Version currently. " ::= { gs2352pMLDSnoopingstatisticEntry 3 } gs2352pMLDSnoopingstatisticQuerierStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the Querier status is ACTIVE or IDLE. DISABLE denotes the specific interface is administratively disabled. " ::= { gs2352pMLDSnoopingstatisticEntry 4 } gs2352pMLDSnoopingstatisticQueriesTransmitted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Transmitted Queries. " ::= { gs2352pMLDSnoopingstatisticEntry 5 } gs2352pMLDSnoopingstatisticQueriesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received Queries. " ::= { gs2352pMLDSnoopingstatisticEntry 6 } gs2352pMLDSnoopingstatisticV1ReportsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V1 Reports. " ::= { gs2352pMLDSnoopingstatisticEntry 7 } gs2352pMLDSnoopingstatisticV2ReportsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V2 Reports. " ::= { gs2352pMLDSnoopingstatisticEntry 8 } gs2352pMLDSnoopingstatisticV1LeavesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V1 Leaves. " ::= { gs2352pMLDSnoopingstatisticEntry 9 } gs2352pMLDSnoopingRouterPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pMLDSnoopingRouterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure Vlan Port Isolation Configuration. " ::= { gs2352pMLDSnoopingStatus 3 } gs2352pMLDSnoopingRouterPortEntry OBJECT-TYPE SYNTAX Gs2352pMLDSnoopingRouterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex } ::= { gs2352pMLDSnoopingRouterPortTable 1 } Gs2352pMLDSnoopingRouterPortEntry ::= SEQUENCE { gs2352pMLDSnoopingRouterPortStatus DisplayString } gs2352pMLDSnoopingRouterPortStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Display which ports act as router ports. A router port is a port on the Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. Static denotes the specific port is configured to be a router port. Dynamic denotes the specific port is learnt to be a router port. Both denote the specific port is configured or learnt to be a router port. " ::= { gs2352pMLDSnoopingRouterPortEntry 1 } gs2352pMLDSnoopingGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pMLDSnoopingGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MLD Snooping Groups Information . " ::= { gs2352pMLDSnooping 5 } gs2352pMLDSnoopingGroupsEntry OBJECT-TYPE SYNTAX Gs2352pMLDSnoopingGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pMLDSnoopingGroupsIndex } ::= { gs2352pMLDSnoopingGroupsTable 1 } Gs2352pMLDSnoopingGroupsEntry ::= SEQUENCE { gs2352pMLDSnoopingGroupsIndex Integer32, gs2352pMLDSnoopingGroupsVLANID Integer32, gs2352pMLDSnoopingGroups InetAddress, gs2352pMLDSnoopingGroupsMemberships DisplayString } gs2352pMLDSnoopingGroupsIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MLD Snooping Groups Index" ::= { gs2352pMLDSnoopingGroupsEntry 1 } gs2352pMLDSnoopingGroupsVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN ID of the group. " ::= { gs2352pMLDSnoopingGroupsEntry 2 } gs2352pMLDSnoopingGroups OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Group address of the group displayed." ::= { gs2352pMLDSnoopingGroupsEntry 3 } gs2352pMLDSnoopingGroupsMemberships OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Ports under this group." ::= { gs2352pMLDSnoopingGroupsEntry 4 } gs2352pMLDSnoopingSSMTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pMLDSnoopingSSMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MLD SFM (Source-Filtered Multicast) Information Table also contains the SSM (Source-Specific Multicast) information. This table is sorted first by VLAN ID, then by group, and then by Port. Different source addresses belong to the same group are treated as single entry." ::= { gs2352pMLDSnooping 6 } gs2352pMLDSnoopingSSMEntry OBJECT-TYPE SYNTAX Gs2352pMLDSnoopingSSMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pMLDSnoopingSSMIndex } ::= { gs2352pMLDSnoopingSSMTable 1 } Gs2352pMLDSnoopingSSMEntry ::= SEQUENCE { gs2352pMLDSnoopingSSMIndex Integer32, gs2352pMLDSnoopingSSMVLANID Integer32, gs2352pMLDSnoopingSSMGroup DisplayString, gs2352pMLDSnoopingSSMPort Integer32, gs2352pMLDSnoopingSSMMode DisplayString, gs2352pMLDSnoopingSSMSourceAddress DisplayString, gs2352pMLDSnoopingSSMType DisplayString } gs2352pMLDSnoopingSSMIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MLD Snooping SSM Index" ::= { gs2352pMLDSnoopingSSMEntry 1 } gs2352pMLDSnoopingSSMVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN ID of the group. " ::= { gs2352pMLDSnoopingSSMEntry 2 } gs2352pMLDSnoopingSSMGroup OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Group address of the group displayed." ::= { gs2352pMLDSnoopingSSMEntry 3 } gs2352pMLDSnoopingSSMPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ports under this group." ::= { gs2352pMLDSnoopingSSMEntry 4 } gs2352pMLDSnoopingSSMMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It can be either Include or Exclude." ::= { gs2352pMLDSnoopingSSMEntry 5 } gs2352pMLDSnoopingSSMSourceAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IP Address of the source. Currently, system limits the total number of IP source addresses for filtering to be 128." ::= { gs2352pMLDSnoopingSSMEntry 6 } gs2352pMLDSnoopingSSMType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Type. It can be either Allow or Deny." ::= { gs2352pMLDSnoopingSSMEntry 7 } gs2352pMVR OBJECT IDENTIFIER ::= { gs2352pConfiguration 18 } gs2352pMVRConfiguration OBJECT IDENTIFIER ::= { gs2352pMVR 1 } gs2352pMVRMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the Global MVR. " ::= { gs2352pMVRConfiguration 1 } gs2352pMVRVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the Multicast VLAN ID. " ::= { gs2352pMVRConfiguration 2 } gs2352pMVRPortConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pMVRPortConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure MVR Port Configuration. " ::= { gs2352pMVRConfiguration 3 } gs2352pMVRPortConfigurationEntry OBJECT-TYPE SYNTAX Gs2352pMVRPortConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex } ::= { gs2352pMVRPortConfigurationTable 1 } Gs2352pMVRPortConfigurationEntry ::= SEQUENCE { gs2352pMVRPortConfigurationMode INTEGER, gs2352pMVRPortConfigurationType INTEGER, gs2352pMVRPortConfigurationImmediateLeave INTEGER } gs2352pMVRPortConfigurationMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable MVR on the port. " ::= { gs2352pMVRPortConfigurationEntry 1 } gs2352pMVRPortConfigurationType OBJECT-TYPE SYNTAX INTEGER { receiver(0), source(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the MVR port type on the port. " ::= { gs2352pMVRPortConfigurationEntry 2 } gs2352pMVRPortConfigurationImmediateLeave OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the fast leave on the port. " ::= { gs2352pMVRPortConfigurationEntry 3 } gs2352pMVRPortGroupFiltering OBJECT IDENTIFIER ::= { gs2352pMVR 2 } gs2352pMVRPortGroupFilteringCreate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create MLD Snooping Port Group Filtering " ::= { gs2352pMVRPortGroupFiltering 1 } gs2352pMVRPortGroupFilteringTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pMVRPortGroupFilteringEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure MVR port group filtering. " ::= { gs2352pMVRPortGroupFiltering 2 } gs2352pMVRPortGroupFilteringEntry OBJECT-TYPE SYNTAX Gs2352pMVRPortGroupFilteringEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pMVRPortGroupFilteringIndex } ::= { gs2352pMVRPortGroupFilteringTable 1 } Gs2352pMVRPortGroupFilteringEntry ::= SEQUENCE { gs2352pMVRPortGroupFilteringIndex Integer32, gs2352pMVRPortGroupFilteringPort Integer32, gs2352pMVRPortGroupFilteringStartGroups DisplayString, gs2352pMVRPortGroupFilteringEndGroups DisplayString, gs2352pMVRPortGroupFilteringRowStatus INTEGER } gs2352pMVRPortGroupFilteringIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MVR Port Group Filtering Configuration Index. " ::= { gs2352pMVRPortGroupFilteringEntry 1 } gs2352pMVRPortGroupFilteringPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The logical port for the settings. " ::= { gs2352pMVRPortGroupFilteringEntry 2 } gs2352pMVRPortGroupFilteringStartGroups OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Group that will be allowed. " ::= { gs2352pMVRPortGroupFilteringEntry 3 } gs2352pMVRPortGroupFilteringEndGroups OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Group that will be allowed. " ::= { gs2352pMVRPortGroupFilteringEntry 4 } gs2352pMVRPortGroupFilteringRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy" ::= { gs2352pMVRPortGroupFilteringEntry 5 } gs2352pMVRGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pMVRGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MVR Groups Information . " ::= { gs2352pMVR 3 } gs2352pMVRGroupsEntry OBJECT-TYPE SYNTAX Gs2352pMVRGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pMVRGroupsIndex } ::= { gs2352pMVRGroupsTable 1 } Gs2352pMVRGroupsEntry ::= SEQUENCE { gs2352pMVRGroupsIndex Integer32, gs2352pMVRGroupsVLANID Integer32, gs2352pMVRGroups InetAddress, gs2352pMVRGroupsMemberships DisplayString } gs2352pMVRGroupsIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MVR Groups Index" ::= { gs2352pMVRGroupsEntry 1 } gs2352pMVRGroupsVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN ID of the group. " ::= { gs2352pMVRGroupsEntry 2 } gs2352pMVRGroups OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Group address of the group displayed." ::= { gs2352pMVRGroupsEntry 3 } gs2352pMVRGroupsMemberships OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Ports under this group." ::= { gs2352pMVRGroupsEntry 4 } gs2352pMVRStatus OBJECT IDENTIFIER ::= { gs2352pMVR 4 } gs2352pMVRstatisticClear OBJECT-TYPE SYNTAX INTEGER { none(0), clear(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Clears all Statistics counters." ::= { gs2352pMVRStatus 1 } gs2352pMVRstatisticVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID of the entry. " ::= { gs2352pMVRStatus 2 } gs2352pMVRstatisticV1ReportsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V1 Reports. " ::= { gs2352pMVRStatus 3 } gs2352pMVRstatisticV2ReportsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V2 Reports. " ::= { gs2352pMVRStatus 4 } gs2352pMVRstatisticV3ReportsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V3 Reports. " ::= { gs2352pMVRStatus 5 } gs2352pMVRstatisticV2LeavesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V2 Leaves. " ::= { gs2352pMVRStatus 6 } gs2352pLACP OBJECT IDENTIFIER ::= { gs2352pConfiguration 19 } gs2352pLACPConf OBJECT IDENTIFIER ::= { gs2352pLACP 1 } gs2352pLACPPortConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pLACPPortConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pLACPConf 1 } gs2352pLACPPortConfigurationEntry OBJECT-TYPE SYNTAX Gs2352pLACPPortConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pLACPPortConfigurationPort } ::= { gs2352pLACPPortConfigurationTable 1 } Gs2352pLACPPortConfigurationEntry ::= SEQUENCE { gs2352pLACPPortConfigurationPort Integer32, gs2352pLACPPortConfigurationMode INTEGER, gs2352pLACPPortConfigurationKey Integer32, gs2352pLACPPortConfigurationRole INTEGER } gs2352pLACPPortConfigurationPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pLACPPortConfigurationEntry 1 } gs2352pLACPPortConfigurationMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable LACP Mode." ::= { gs2352pLACPPortConfigurationEntry 2 } gs2352pLACPPortConfigurationKey OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "LACP key : 1-65535. 0 : Auto" ::= { gs2352pLACPPortConfigurationEntry 3 } gs2352pLACPPortConfigurationRole OBJECT-TYPE SYNTAX INTEGER { passive(0), active(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0 : passive, Listen for LACP packets. 1 : active, Initiate LACP negotiation, and transmit LACP packets each second" ::= { gs2352pLACPPortConfigurationEntry 4 } gs2352pLACPSystemStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pLACPSystemStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pLACP 2 } gs2352pLACPSystemStatusEntry OBJECT-TYPE SYNTAX Gs2352pLACPSystemStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pLACPSystemStatusIndex } ::= { gs2352pLACPSystemStatusTable 1 } Gs2352pLACPSystemStatusEntry ::= SEQUENCE { gs2352pLACPSystemStatusIndex Integer32, gs2352pLACPSystemStatusAggrID DisplayString, gs2352pLACPSystemStatusPartnerSystemID MacAddress, gs2352pLACPSystemStatusPartnerKey DisplayString, gs2352pLACPSystemStatusLastchanged DisplayString, gs2352pLACPSystemStatusLocalPorts DisplayString } gs2352pLACPSystemStatusIndex OBJECT-TYPE SYNTAX Integer32(1..12) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pLACPSystemStatusEntry 1 } gs2352pLACPSystemStatusAggrID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Aggregation ID associated with this aggregation instance." ::= { gs2352pLACPSystemStatusEntry 2 } gs2352pLACPSystemStatusPartnerSystemID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The system ID (MAC address) of the aggregation partner." ::= { gs2352pLACPSystemStatusEntry 3 } gs2352pLACPSystemStatusPartnerKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Key that the partner has assigned to this aggregation ID. " ::= { gs2352pLACPSystemStatusEntry 4 } gs2352pLACPSystemStatusLastchanged OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The time since this aggregation changed. " ::= { gs2352pLACPSystemStatusEntry 5 } gs2352pLACPSystemStatusLocalPorts OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Shows which ports are a part of this aggregation for this switch. " ::= { gs2352pLACPSystemStatusEntry 6 } gs2352pLACPStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pLACPStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pLACP 3 } gs2352pLACPStatusEntry OBJECT-TYPE SYNTAX Gs2352pLACPStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pLACPStatusPort } ::= { gs2352pLACPStatusTable 1 } Gs2352pLACPStatusEntry ::= SEQUENCE { gs2352pLACPStatusPort Integer32, gs2352pLACPStatusLACP DisplayString, gs2352pLACPStatusKey DisplayString, gs2352pLACPStatusAggrID DisplayString, gs2352pLACPStatusPartnerSystemID DisplayString, gs2352pLACPStatusPartnerPort DisplayString } gs2352pLACPStatusPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pLACPStatusEntry 1 } gs2352pLACPStatusLACP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Enabled means that LACP is enabled and the port link is up. Disabled means that LACP is not enabled or that the port link is down. Backup means that the port could not join the aggregation group but will join if other port leaves. Meanwhile it's LACP status is disabled." ::= { gs2352pLACPStatusEntry 2 } gs2352pLACPStatusKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The key assigned to this port. Only ports with the same key can aggregate together." ::= { gs2352pLACPStatusEntry 3 } gs2352pLACPStatusAggrID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Aggregation ID assigned to this aggregation group. " ::= { gs2352pLACPStatusEntry 4 } gs2352pLACPStatusPartnerSystemID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The partner's System ID. " ::= { gs2352pLACPStatusEntry 5 } gs2352pLACPStatusPartnerPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The partner's port number connected to this port. " ::= { gs2352pLACPStatusEntry 6 } gs2352pLACPStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pLACPStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pLACP 4 } gs2352pLACPStatisticsEntry OBJECT-TYPE SYNTAX Gs2352pLACPStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pLACPStatisticsPort } ::= { gs2352pLACPStatisticsTable 1 } Gs2352pLACPStatisticsEntry ::= SEQUENCE { gs2352pLACPStatisticsPort Integer32, gs2352pLACPReceived Counter32, gs2352pLACPTransmitted Counter32, gs2352pLACPDiscardedUnknown Counter32, gs2352pLACPDiscardedIllegal Counter32 } gs2352pLACPStatisticsPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pLACPStatisticsEntry 1 } gs2352pLACPReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows how many LACP frames have been received at each port. " ::= { gs2352pLACPStatisticsEntry 2 } gs2352pLACPTransmitted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Shows how many LACP frames have been sent from each port. " ::= { gs2352pLACPStatisticsEntry 3 } gs2352pLACPDiscardedUnknown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Shows how many unknown LACP frames have been discarded at each port. " ::= { gs2352pLACPStatisticsEntry 4 } gs2352pLACPDiscardedIllegal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Shows how many illegal LACP frames have been discarded at each port. " ::= { gs2352pLACPStatisticsEntry 5 } gs2352pLACPStatisticsClear OBJECT-TYPE SYNTAX INTEGER { none(0), clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: clear" ::= { gs2352pLACP 5 } gs2352pSTP OBJECT IDENTIFIER ::= { gs2352pConfiguration 20 } gs2352pSTPBridgeBasicConf OBJECT IDENTIFIER ::= { gs2352pSTP 1 } gs2352pSTPBridgeProtocolVersion OBJECT-TYPE SYNTAX INTEGER { stp(0), rstp(2), mstp(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 3, 0: stp 2: rstp 3: mstp" ::= { gs2352pSTPBridgeBasicConf 1 } gs2352pSTPBridgePriority OBJECT-TYPE SYNTAX Integer32(0..61440) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 32768, STP bridge priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)" ::= { gs2352pSTPBridgeBasicConf 2 } gs2352pSTPBridgeForwardDelay OBJECT-TYPE SYNTAX Integer32(4..30) MAX-ACCESS read-write STATUS current DESCRIPTION " Forward Delay default: 15, range: 4 - 30. MaxAge must be <= (FwdDelay-1)*2." ::= { gs2352pSTPBridgeBasicConf 3 } gs2352pSTPBridgeMaxAge OBJECT-TYPE SYNTAX Integer32(6..40) MAX-ACCESS read-write STATUS current DESCRIPTION " Max Age default: 20, range: 6 - 40. MaxAge must be <= (FwdDelay-1)*2" ::= { gs2352pSTPBridgeBasicConf 4 } gs2352pSTPBridgeMaximumHopCount OBJECT-TYPE SYNTAX Integer32(6..40) MAX-ACCESS read-write STATUS current DESCRIPTION " Maximum Hop Count default: 20, range: 6 - 40." ::= { gs2352pSTPBridgeBasicConf 5 } gs2352pSTPBridgeTransmitHoldCount OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS read-write STATUS current DESCRIPTION " Transmit Hold Count default: 6, range: 1 - 10." ::= { gs2352pSTPBridgeBasicConf 6 } gs2352pSTPBridgeAdvancedConf OBJECT IDENTIFIER ::= { gs2352pSTP 2 } gs2352pSTPBridgeEdgePortBPDUFiltering OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 0, 0: disable 1: enable" ::= { gs2352pSTPBridgeAdvancedConf 1 } gs2352pSTPBridgeEdgePortBPDUGuard OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 0, 0: disable 1: enable" ::= { gs2352pSTPBridgeAdvancedConf 2 } gs2352pSTPBridgePortErrorRecoveryTimeout OBJECT-TYPE SYNTAX Integer32(0..86400) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Error Recovery Timeout disable: 0, range: 30 - 86400." ::= { gs2352pSTPBridgeAdvancedConf 3 } gs2352pSTPMSTIConf OBJECT IDENTIFIER ::= { gs2352pSTP 3 } gs2352pSTPMSTIConfigurationName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "A text string up to 32 characters long." ::= { gs2352pSTPMSTIConf 1 } gs2352pSTPMSTIConfigurationRevision OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Configuration Revision default: 0, range: 0 - 65535." ::= { gs2352pSTPMSTIConf 2 } gs2352pSTPMSTIMappingConf OBJECT IDENTIFIER ::= { gs2352pSTP 4 } gs2352pSTPMSTI1VLANsMapped OBJECT-TYPE SYNTAX DisplayString (SIZE (1..4096)) MAX-ACCESS read-write STATUS current DESCRIPTION "The list of VLANs mapped to the MSTI1. The VLANs must be separated with comma or space. An unused MSTI should just be left empty. " ::= { gs2352pSTPMSTIMappingConf 1 } gs2352pSTPMSTI2VLANsMapped OBJECT-TYPE SYNTAX DisplayString (SIZE (1..4096)) MAX-ACCESS read-write STATUS current DESCRIPTION "The list of VLANs mapped to the MSTI2. The VLANs must be separated with comma or space. An unused MSTI should just be left empty. " ::= { gs2352pSTPMSTIMappingConf 2 } gs2352pSTPMSTI3VLANsMapped OBJECT-TYPE SYNTAX DisplayString (SIZE (1..4096)) MAX-ACCESS read-write STATUS current DESCRIPTION "The list of VLANs mapped to the MSTI3. The VLANs must be separated with comma or space. An unused MSTI should just be left empty. " ::= { gs2352pSTPMSTIMappingConf 3 } gs2352pSTPMSTI4VLANsMapped OBJECT-TYPE SYNTAX DisplayString (SIZE (1..4096)) MAX-ACCESS read-write STATUS current DESCRIPTION "The list of VLANs mapped to the MSTI4. The VLANs must be separated with comma or space. An unused MSTI should just be left empty. " ::= { gs2352pSTPMSTIMappingConf 4 } gs2352pSTPMSTI5VLANsMapped OBJECT-TYPE SYNTAX DisplayString (SIZE (1..4096)) MAX-ACCESS read-write STATUS current DESCRIPTION "The list of VLANs mapped to the MSTI5. The VLANs must be separated with comma or space. An unused MSTI should just be left empty. " ::= { gs2352pSTPMSTIMappingConf 5 } gs2352pSTPMSTI6VLANsMapped OBJECT-TYPE SYNTAX DisplayString (SIZE (1..4096)) MAX-ACCESS read-write STATUS current DESCRIPTION "The list of VLANs mapped to the MSTI6. The VLANs must be separated with comma or space. An unused MSTI should just be left empty. " ::= { gs2352pSTPMSTIMappingConf 6 } gs2352pSTPMSTI7VLANsMapped OBJECT-TYPE SYNTAX DisplayString (SIZE (1..4096)) MAX-ACCESS read-write STATUS current DESCRIPTION "The list of VLANs mapped to the MSTI7. The VLANs must be separated with comma or space. An unused MSTI should just be left empty. " ::= { gs2352pSTPMSTIMappingConf 7 } gs2352pSTPMSTIPriority OBJECT IDENTIFIER ::= { gs2352pSTP 5 } gs2352pSTPCISTPriority OBJECT-TYPE SYNTAX Integer32(0..61440) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 32768, STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)" ::= { gs2352pSTPMSTIPriority 1 } gs2352pSTPMSTI1Priority OBJECT-TYPE SYNTAX Integer32(0..61440) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 32768, STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)" ::= { gs2352pSTPMSTIPriority 2 } gs2352pSTPMSTI2Priority OBJECT-TYPE SYNTAX Integer32(0..61440) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 32768, STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)" ::= { gs2352pSTPMSTIPriority 3 } gs2352pSTPMSTI3Priority OBJECT-TYPE SYNTAX Integer32(0..61440) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 32768, STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)" ::= { gs2352pSTPMSTIPriority 4 } gs2352pSTPMSTI4Priority OBJECT-TYPE SYNTAX Integer32(0..61440) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 32768, STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)" ::= { gs2352pSTPMSTIPriority 5 } gs2352pSTPMSTI5Priority OBJECT-TYPE SYNTAX Integer32(0..61440) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 32768, STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)" ::= { gs2352pSTPMSTIPriority 6 } gs2352pSTPMSTI6Priority OBJECT-TYPE SYNTAX Integer32(0..61440) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 32768, STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)" ::= { gs2352pSTPMSTIPriority 7 } gs2352pSTPMSTI7Priority OBJECT-TYPE SYNTAX Integer32(0..61440) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 32768, STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)" ::= { gs2352pSTPMSTIPriority 8 } gs2352pSTPCISTPort OBJECT IDENTIFIER ::= { gs2352pSTP 6 } gs2352pSTPCISTAggregatedPort OBJECT IDENTIFIER ::= { gs2352pSTPCISTPort 1 } gs2352pSTPCISTAggregatedPortSTPEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 0, 0: disable 1: enable" ::= { gs2352pSTPCISTAggregatedPort 1 } gs2352pSTPCISTAggregatedPortPathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Auto: 0, Specific Path Cost range: 1 - 200000000." ::= { gs2352pSTPCISTAggregatedPort 2 } gs2352pSTPCISTAggregatedPortPriority OBJECT-TYPE SYNTAX Integer32(0..240) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 128, CIST Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)" ::= { gs2352pSTPCISTAggregatedPort 3 } gs2352pSTPCISTAggregatedPortAdminEdge OBJECT-TYPE SYNTAX INTEGER { non-edge(0), edge(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 0, 0: non-edge 1: edge" ::= { gs2352pSTPCISTAggregatedPort 4 } gs2352pSTPCISTAggregatedPortAutoEdge OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 1, 0: disable 1: enable" ::= { gs2352pSTPCISTAggregatedPort 5 } gs2352pSTPCISTAggregatedPortRestrictedRole OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 0, 0: disable 1: enable" ::= { gs2352pSTPCISTAggregatedPort 6 } gs2352pSTPCISTAggregatedPortRestrictedTCN OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 0, 0: disable 1: enable" ::= { gs2352pSTPCISTAggregatedPort 7 } gs2352pSTPCISTAggregatedPortBPDUGuard OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 0, 0: disable 1: enable" ::= { gs2352pSTPCISTAggregatedPort 8 } gs2352pSTPCISTAggregatedPortPointtoPoint OBJECT-TYPE SYNTAX INTEGER { forcetrue(0), forcefalse(1), auto(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 0, 0: Forced True 1: Forced False 2: Auto" ::= { gs2352pSTPCISTAggregatedPort 9 } gs2352pSTPCISTNormalPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pSTPCISTNormalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show CIST Normal Port Configurations. " ::= { gs2352pSTPCISTPort 2 } gs2352pSTPCISTNormalPortEntry OBJECT-TYPE SYNTAX Gs2352pSTPCISTNormalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pSTPCISTNormalPortConfPort } ::= { gs2352pSTPCISTNormalPortTable 1 } Gs2352pSTPCISTNormalPortEntry ::= SEQUENCE { gs2352pSTPCISTNormalPortConfPort Integer32, gs2352pSTPCISTNormalPortSTPEnabled INTEGER, gs2352pSTPCISTNormalPortPathCost Integer32, gs2352pSTPCISTNormalPortPriority Integer32, gs2352pSTPCISTNormalPortAdminEdge INTEGER, gs2352pSTPCISTNormalPortAutoEdge INTEGER, gs2352pSTPCISTNormalPortRestrictedRole INTEGER, gs2352pSTPCISTNormalPortRestrictedTCN INTEGER, gs2352pSTPCISTNormalPortBPDUGuard INTEGER, gs2352pSTPCISTNormalPortPointtoPoint INTEGER } gs2352pSTPCISTNormalPortConfPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pSTPCISTNormalPortEntry 1 } gs2352pSTPCISTNormalPortSTPEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 0, 0: disable 1: enable" ::= { gs2352pSTPCISTNormalPortEntry 2 } gs2352pSTPCISTNormalPortPathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Auto: 0, Specific Path Cost range: 1 - 200000000." ::= { gs2352pSTPCISTNormalPortEntry 3 } gs2352pSTPCISTNormalPortPriority OBJECT-TYPE SYNTAX Integer32(0..240) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 128, CIST Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)" ::= { gs2352pSTPCISTNormalPortEntry 4 } gs2352pSTPCISTNormalPortAdminEdge OBJECT-TYPE SYNTAX INTEGER { non-edge(0), edge(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 0, 0: non-edge 1: edge" ::= { gs2352pSTPCISTNormalPortEntry 5 } gs2352pSTPCISTNormalPortAutoEdge OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 1, 0: disable 1: enable" ::= { gs2352pSTPCISTNormalPortEntry 6 } gs2352pSTPCISTNormalPortRestrictedRole OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 0, 0: disable 1: enable" ::= { gs2352pSTPCISTNormalPortEntry 7 } gs2352pSTPCISTNormalPortRestrictedTCN OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 0, 0: disable 1: enable" ::= { gs2352pSTPCISTNormalPortEntry 8 } gs2352pSTPCISTNormalPortBPDUGuard OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 0, 0: disable 1: enable" ::= { gs2352pSTPCISTNormalPortEntry 9 } gs2352pSTPCISTNormalPortPointtoPoint OBJECT-TYPE SYNTAX INTEGER { forcetrue(0), forcefalse(1), auto(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 2, 0: Forced True 1: Forced False 2: Auto" ::= { gs2352pSTPCISTNormalPortEntry 10 } gs2352pSTPMSTIPort OBJECT IDENTIFIER ::= { gs2352pSTP 7 } gs2352pSTPMSTI1Port OBJECT IDENTIFIER ::= { gs2352pSTPMSTIPort 1 } gs2352pSTPMSTI1AggregatedPort OBJECT IDENTIFIER ::= { gs2352pSTPMSTI1Port 1 } gs2352pSTPMSTI1AggregatedPortPathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Auto: 0, Specific Path Cost range: 1 - 200000000." ::= { gs2352pSTPMSTI1AggregatedPort 1 } gs2352pSTPMSTI1AggregatedPortPriority OBJECT-TYPE SYNTAX Integer32(0..240) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)" ::= { gs2352pSTPMSTI1AggregatedPort 2 } gs2352pSTPMSTI1NormalPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pSTPMSTI1NormalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show MSTI1 Normal Port Configurations. " ::= { gs2352pSTPMSTI1Port 2 } gs2352pSTPMSTI1NormalPortEntry OBJECT-TYPE SYNTAX Gs2352pSTPMSTI1NormalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pSTPMSTI1NormalPortConfPort } ::= { gs2352pSTPMSTI1NormalPortTable 1 } Gs2352pSTPMSTI1NormalPortEntry ::= SEQUENCE { gs2352pSTPMSTI1NormalPortConfPort Integer32, gs2352pSTPMSTI1NormalPortPathCost Integer32, gs2352pSTPMSTI1NormalPortPriority Integer32 } gs2352pSTPMSTI1NormalPortConfPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pSTPMSTI1NormalPortEntry 1 } gs2352pSTPMSTI1NormalPortPathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Auto: 0, Specific Path Cost range: 1 - 200000000." ::= { gs2352pSTPMSTI1NormalPortEntry 2 } gs2352pSTPMSTI1NormalPortPriority OBJECT-TYPE SYNTAX Integer32(0..240) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)" ::= { gs2352pSTPMSTI1NormalPortEntry 3 } gs2352pSTPMSTI2Port OBJECT IDENTIFIER ::= { gs2352pSTPMSTIPort 2 } gs2352pSTPMSTI2AggregatedPort OBJECT IDENTIFIER ::= { gs2352pSTPMSTI2Port 1 } gs2352pSTPMSTI2AggregatedPortPathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Auto: 0, Specific Path Cost range: 1 - 200000000." ::= { gs2352pSTPMSTI2AggregatedPort 1 } gs2352pSTPMSTI2AggregatedPortPriority OBJECT-TYPE SYNTAX Integer32(0..240) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)" ::= { gs2352pSTPMSTI2AggregatedPort 2 } gs2352pSTPMSTI2NormalPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pSTPMSTI2NormalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show MSTI2 Normal Port Configurations. " ::= { gs2352pSTPMSTI2Port 2 } gs2352pSTPMSTI2NormalPortEntry OBJECT-TYPE SYNTAX Gs2352pSTPMSTI2NormalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pSTPMSTI2NormalPortConfPort } ::= { gs2352pSTPMSTI2NormalPortTable 1 } Gs2352pSTPMSTI2NormalPortEntry ::= SEQUENCE { gs2352pSTPMSTI2NormalPortConfPort Integer32, gs2352pSTPMSTI2NormalPortPathCost Integer32, gs2352pSTPMSTI2NormalPortPriority Integer32 } gs2352pSTPMSTI2NormalPortConfPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pSTPMSTI2NormalPortEntry 1 } gs2352pSTPMSTI2NormalPortPathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Auto: 0, Specific Path Cost range: 1 - 200000000." ::= { gs2352pSTPMSTI2NormalPortEntry 2 } gs2352pSTPMSTI2NormalPortPriority OBJECT-TYPE SYNTAX Integer32(0..240) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)" ::= { gs2352pSTPMSTI2NormalPortEntry 3 } gs2352pSTPMSTI3Port OBJECT IDENTIFIER ::= { gs2352pSTPMSTIPort 3 } gs2352pSTPMSTI3AggregatedPort OBJECT IDENTIFIER ::= { gs2352pSTPMSTI3Port 1 } gs2352pSTPMSTI3AggregatedPortPathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Auto: 0, Specific Path Cost range: 1 - 200000000." ::= { gs2352pSTPMSTI3AggregatedPort 1 } gs2352pSTPMSTI3AggregatedPortPriority OBJECT-TYPE SYNTAX Integer32(0..240) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)" ::= { gs2352pSTPMSTI3AggregatedPort 2 } gs2352pSTPMSTI3NormalPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pSTPMSTI3NormalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show MSTI3 Normal Port Configurations. " ::= { gs2352pSTPMSTI3Port 2 } gs2352pSTPMSTI3NormalPortEntry OBJECT-TYPE SYNTAX Gs2352pSTPMSTI3NormalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pSTPMSTI3NormalPortConfPort } ::= { gs2352pSTPMSTI3NormalPortTable 1 } Gs2352pSTPMSTI3NormalPortEntry ::= SEQUENCE { gs2352pSTPMSTI3NormalPortConfPort Integer32, gs2352pSTPMSTI3NormalPortPathCost Integer32, gs2352pSTPMSTI3NormalPortPriority Integer32 } gs2352pSTPMSTI3NormalPortConfPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pSTPMSTI3NormalPortEntry 1 } gs2352pSTPMSTI3NormalPortPathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Auto: 0, Specific Path Cost range: 1 - 200000000." ::= { gs2352pSTPMSTI3NormalPortEntry 2 } gs2352pSTPMSTI3NormalPortPriority OBJECT-TYPE SYNTAX Integer32(0..240) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)" ::= { gs2352pSTPMSTI3NormalPortEntry 3 } gs2352pSTPMSTI4Port OBJECT IDENTIFIER ::= { gs2352pSTPMSTIPort 4 } gs2352pSTPMSTI4AggregatedPort OBJECT IDENTIFIER ::= { gs2352pSTPMSTI4Port 1 } gs2352pSTPMSTI4AggregatedPortPathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Auto: 0, Specific Path Cost range: 1 - 200000000." ::= { gs2352pSTPMSTI4AggregatedPort 1 } gs2352pSTPMSTI4AggregatedPortPriority OBJECT-TYPE SYNTAX Integer32(0..240) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)" ::= { gs2352pSTPMSTI4AggregatedPort 2 } gs2352pSTPMSTI4NormalPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pSTPMSTI4NormalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show MSTI4 Normal Port Configurations. " ::= { gs2352pSTPMSTI4Port 2 } gs2352pSTPMSTI4NormalPortEntry OBJECT-TYPE SYNTAX Gs2352pSTPMSTI4NormalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pSTPMSTI4NormalPortConfPort } ::= { gs2352pSTPMSTI4NormalPortTable 1 } Gs2352pSTPMSTI4NormalPortEntry ::= SEQUENCE { gs2352pSTPMSTI4NormalPortConfPort Integer32, gs2352pSTPMSTI4NormalPortPathCost Integer32, gs2352pSTPMSTI4NormalPortPriority Integer32 } gs2352pSTPMSTI4NormalPortConfPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pSTPMSTI4NormalPortEntry 1 } gs2352pSTPMSTI4NormalPortPathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Auto: 0, Specific Path Cost range: 1 - 200000000." ::= { gs2352pSTPMSTI4NormalPortEntry 2 } gs2352pSTPMSTI4NormalPortPriority OBJECT-TYPE SYNTAX Integer32(0..240) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)" ::= { gs2352pSTPMSTI4NormalPortEntry 3 } gs2352pSTPMSTI5Port OBJECT IDENTIFIER ::= { gs2352pSTPMSTIPort 5 } gs2352pSTPMSTI5AggregatedPort OBJECT IDENTIFIER ::= { gs2352pSTPMSTI5Port 1 } gs2352pSTPMSTI5AggregatedPortPathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Auto: 0, Specific Path Cost range: 1 - 200000000." ::= { gs2352pSTPMSTI5AggregatedPort 1 } gs2352pSTPMSTI5AggregatedPortPriority OBJECT-TYPE SYNTAX Integer32(0..240) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)" ::= { gs2352pSTPMSTI5AggregatedPort 2 } gs2352pSTPMSTI5NormalPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pSTPMSTI5NormalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show MSTI5 Normal Port Configurations. " ::= { gs2352pSTPMSTI5Port 2 } gs2352pSTPMSTI5NormalPortEntry OBJECT-TYPE SYNTAX Gs2352pSTPMSTI5NormalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pSTPMSTI5NormalPortConfPort } ::= { gs2352pSTPMSTI5NormalPortTable 1 } Gs2352pSTPMSTI5NormalPortEntry ::= SEQUENCE { gs2352pSTPMSTI5NormalPortConfPort Integer32, gs2352pSTPMSTI5NormalPortPathCost Integer32, gs2352pSTPMSTI5NormalPortPriority Integer32 } gs2352pSTPMSTI5NormalPortConfPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pSTPMSTI5NormalPortEntry 1 } gs2352pSTPMSTI5NormalPortPathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Auto: 0, Specific Path Cost range: 1 - 200000000." ::= { gs2352pSTPMSTI5NormalPortEntry 2 } gs2352pSTPMSTI5NormalPortPriority OBJECT-TYPE SYNTAX Integer32(0..240) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)" ::= { gs2352pSTPMSTI5NormalPortEntry 3 } gs2352pSTPMSTI6Port OBJECT IDENTIFIER ::= { gs2352pSTPMSTIPort 6 } gs2352pSTPMSTI6AggregatedPort OBJECT IDENTIFIER ::= { gs2352pSTPMSTI6Port 1 } gs2352pSTPMSTI6AggregatedPortPathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Auto: 0, Specific Path Cost range: 1 - 200000000." ::= { gs2352pSTPMSTI6AggregatedPort 1 } gs2352pSTPMSTI6AggregatedPortPriority OBJECT-TYPE SYNTAX Integer32(0..240) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)" ::= { gs2352pSTPMSTI6AggregatedPort 2 } gs2352pSTPMSTI6NormalPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pSTPMSTI6NormalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show MSTI6 Normal Port Configurations. " ::= { gs2352pSTPMSTI6Port 2 } gs2352pSTPMSTI6NormalPortEntry OBJECT-TYPE SYNTAX Gs2352pSTPMSTI6NormalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pSTPMSTI6NormalPortConfPort } ::= { gs2352pSTPMSTI6NormalPortTable 1 } Gs2352pSTPMSTI6NormalPortEntry ::= SEQUENCE { gs2352pSTPMSTI6NormalPortConfPort Integer32, gs2352pSTPMSTI6NormalPortPathCost Integer32, gs2352pSTPMSTI6NormalPortPriority Integer32 } gs2352pSTPMSTI6NormalPortConfPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pSTPMSTI6NormalPortEntry 1 } gs2352pSTPMSTI6NormalPortPathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Auto: 0, Specific Path Cost range: 1 - 200000000." ::= { gs2352pSTPMSTI6NormalPortEntry 2 } gs2352pSTPMSTI6NormalPortPriority OBJECT-TYPE SYNTAX Integer32(0..240) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)" ::= { gs2352pSTPMSTI6NormalPortEntry 3 } gs2352pSTPMSTI7Port OBJECT IDENTIFIER ::= { gs2352pSTPMSTIPort 7 } gs2352pSTPMSTI7AggregatedPort OBJECT IDENTIFIER ::= { gs2352pSTPMSTI7Port 1 } gs2352pSTPMSTI7AggregatedPortPathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Auto: 0, Specific Path Cost range: 1 - 200000000." ::= { gs2352pSTPMSTI7AggregatedPort 1 } gs2352pSTPMSTI7AggregatedPortPriority OBJECT-TYPE SYNTAX Integer32(0..240) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)" ::= { gs2352pSTPMSTI7AggregatedPort 2 } gs2352pSTPMSTI7NormalPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pSTPMSTI7NormalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show MSTI7 Normal Port Configurations. " ::= { gs2352pSTPMSTI7Port 2 } gs2352pSTPMSTI7NormalPortEntry OBJECT-TYPE SYNTAX Gs2352pSTPMSTI7NormalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pSTPMSTI7NormalPortConfPort } ::= { gs2352pSTPMSTI7NormalPortTable 1 } Gs2352pSTPMSTI7NormalPortEntry ::= SEQUENCE { gs2352pSTPMSTI7NormalPortConfPort Integer32, gs2352pSTPMSTI7NormalPortPathCost Integer32, gs2352pSTPMSTI7NormalPortPriority Integer32 } gs2352pSTPMSTI7NormalPortConfPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pSTPMSTI7NormalPortEntry 1 } gs2352pSTPMSTI7NormalPortPathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Auto: 0, Specific Path Cost range: 1 - 200000000." ::= { gs2352pSTPMSTI7NormalPortEntry 2 } gs2352pSTPMSTI7NormalPortPriority OBJECT-TYPE SYNTAX Integer32(0..240) MAX-ACCESS read-write STATUS current DESCRIPTION " default: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)" ::= { gs2352pSTPMSTI7NormalPortEntry 3 } gs2352pSTPBridgeStatus OBJECT IDENTIFIER ::= { gs2352pSTP 8 } gs2352pCISTBridgeSTP OBJECT IDENTIFIER ::= { gs2352pSTPBridgeStatus 1 } gs2352pCISTBridgeSTPStatus OBJECT IDENTIFIER ::= { gs2352pCISTBridgeSTP 1 } gs2352pCISTBridgeInstance OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge instance - CIST, MST1, ..." ::= { gs2352pCISTBridgeSTPStatus 1 } gs2352pCISTBridgeID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge ID of this Bridge instance." ::= { gs2352pCISTBridgeSTPStatus 2 } gs2352pCISTRootID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge ID of the currently elected root bridge." ::= { gs2352pCISTBridgeSTPStatus 3 } gs2352pCISTRootPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port currently assigned the root port role." ::= { gs2352pCISTBridgeSTPStatus 4 } gs2352pCISTRootCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Root Path Cost." ::= { gs2352pCISTBridgeSTPStatus 5 } gs2352pCISTRegionalRoot OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge ID of the currently elected regional root bridge, inside the MSTP region of this bridge." ::= { gs2352pCISTBridgeSTPStatus 6 } gs2352pCISTInternalRootCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The Regional Root Path Cost." ::= { gs2352pCISTBridgeSTPStatus 7 } gs2352pCISTTopologyFlag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the Topology Change Flag of this Bridge instance." ::= { gs2352pCISTBridgeSTPStatus 8 } gs2352pCISTTopologyChangeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times where the topology change flag has been set." ::= { gs2352pCISTBridgeSTPStatus 9 } gs2352pCISTTopologyChangeLast OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time passed since the Topology Flag was last set." ::= { gs2352pCISTBridgeSTPStatus 10 } gs2352pCISTPortStateTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pCISTPortStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show CIST Ports and Aggregations State Configurations. " ::= { gs2352pCISTBridgeSTP 2 } gs2352pCISTPortStateEntry OBJECT-TYPE SYNTAX Gs2352pCISTPortStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pCISTPortStateIndex } ::= { gs2352pCISTPortStateTable 1 } Gs2352pCISTPortStateEntry ::= SEQUENCE { gs2352pCISTPortStateIndex Integer32, gs2352pCISTPortStatePort DisplayString, gs2352pCISTPortStatePortID DisplayString, gs2352pCISTPortStateRole DisplayString, gs2352pCISTPortStateState DisplayString, gs2352pCISTPortStatePathCost Integer32, gs2352pCISTPortStateEdge DisplayString, gs2352pCISTPortStatePoint2Point DisplayString, gs2352pCISTPortStateUptime DisplayString } gs2352pCISTPortStateIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "table index." ::= { gs2352pCISTPortStateEntry 1 } gs2352pCISTPortStatePort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port number of the logical STP port." ::= { gs2352pCISTPortStateEntry 2 } gs2352pCISTPortStatePortID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port." ::= { gs2352pCISTPortStateEntry 3 } gs2352pCISTPortStateRole OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port role." ::= { gs2352pCISTPortStateEntry 4 } gs2352pCISTPortStateState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port state." ::= { gs2352pCISTPortStateEntry 5 } gs2352pCISTPortStatePathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port path cost." ::= { gs2352pCISTPortStateEntry 6 } gs2352pCISTPortStateEdge OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port Edge Flag." ::= { gs2352pCISTPortStateEntry 7 } gs2352pCISTPortStatePoint2Point OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port point-to-point flag." ::= { gs2352pCISTPortStateEntry 8 } gs2352pCISTPortStateUptime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the bridge port was last initialized." ::= { gs2352pCISTPortStateEntry 9 } gs2352pMSTI1BridgeSTP OBJECT IDENTIFIER ::= { gs2352pSTPBridgeStatus 2 } gs2352pMSTI1BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2352pMSTI1BridgeSTP 1 } gs2352pMSTI1BridgeInstance OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge instance - CIST, MST1, ..." ::= { gs2352pMSTI1BridgeSTPStatus 1 } gs2352pMSTI1BridgeID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge ID of this Bridge instance." ::= { gs2352pMSTI1BridgeSTPStatus 2 } gs2352pMSTI1RootID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge ID of the currently elected root bridge." ::= { gs2352pMSTI1BridgeSTPStatus 3 } gs2352pMSTI1RootPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port currently assigned the root port role." ::= { gs2352pMSTI1BridgeSTPStatus 4 } gs2352pMSTI1RootCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Root Path Cost." ::= { gs2352pMSTI1BridgeSTPStatus 5 } gs2352pMSTI1TopologyFlag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the Topology Change Flag of this Bridge instance." ::= { gs2352pMSTI1BridgeSTPStatus 8 } gs2352pMSTI1TopologyChangeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times where the topology change flag has been set." ::= { gs2352pMSTI1BridgeSTPStatus 9 } gs2352pMSTI1TopologyChangeLast OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time passed since the Topology Flag was last set." ::= { gs2352pMSTI1BridgeSTPStatus 10 } gs2352pMSTI1PortStateTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pMSTI1PortStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show MSTI1 Ports and Aggregations State Configurations. " ::= { gs2352pMSTI1BridgeSTP 2 } gs2352pMSTI1PortStateEntry OBJECT-TYPE SYNTAX Gs2352pMSTI1PortStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pMSTI1PortStateIndex } ::= { gs2352pMSTI1PortStateTable 1 } Gs2352pMSTI1PortStateEntry ::= SEQUENCE { gs2352pMSTI1PortStateIndex Integer32, gs2352pMSTI1PortStatePort DisplayString, gs2352pMSTI1PortStatePortID DisplayString, gs2352pMSTI1PortStateRole DisplayString, gs2352pMSTI1PortStateState DisplayString, gs2352pMSTI1PortStatePathCost Integer32, gs2352pMSTI1PortStateEdge DisplayString, gs2352pMSTI1PortStatePoint2Point DisplayString, gs2352pMSTI1PortStateUptime DisplayString } gs2352pMSTI1PortStateIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "table index." ::= { gs2352pMSTI1PortStateEntry 1 } gs2352pMSTI1PortStatePort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port number of the logical STP port." ::= { gs2352pMSTI1PortStateEntry 2 } gs2352pMSTI1PortStatePortID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port." ::= { gs2352pMSTI1PortStateEntry 3 } gs2352pMSTI1PortStateRole OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port role." ::= { gs2352pMSTI1PortStateEntry 4 } gs2352pMSTI1PortStateState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port state." ::= { gs2352pMSTI1PortStateEntry 5 } gs2352pMSTI1PortStatePathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port path cost." ::= { gs2352pMSTI1PortStateEntry 6 } gs2352pMSTI1PortStateEdge OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port Edge Flag." ::= { gs2352pMSTI1PortStateEntry 7 } gs2352pMSTI1PortStatePoint2Point OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port point-to-point flag." ::= { gs2352pMSTI1PortStateEntry 8 } gs2352pMSTI1PortStateUptime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the bridge port was last initialized." ::= { gs2352pMSTI1PortStateEntry 9 } gs2352pMSTI2BridgeSTP OBJECT IDENTIFIER ::= { gs2352pSTPBridgeStatus 3 } gs2352pMSTI2BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2352pMSTI2BridgeSTP 1 } gs2352pMSTI2BridgeInstance OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge instance - CIST, MST1, ..." ::= { gs2352pMSTI2BridgeSTPStatus 1 } gs2352pMSTI2BridgeID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge ID of this Bridge instance." ::= { gs2352pMSTI2BridgeSTPStatus 2 } gs2352pMSTI2RootID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge ID of the currently elected root bridge." ::= { gs2352pMSTI2BridgeSTPStatus 3 } gs2352pMSTI2RootPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port currently assigned the root port role." ::= { gs2352pMSTI2BridgeSTPStatus 4 } gs2352pMSTI2RootCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Root Path Cost." ::= { gs2352pMSTI2BridgeSTPStatus 5 } gs2352pMSTI2TopologyFlag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the Topology Change Flag of this Bridge instance." ::= { gs2352pMSTI2BridgeSTPStatus 8 } gs2352pMSTI2TopologyChangeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times where the topology change flag has been set." ::= { gs2352pMSTI2BridgeSTPStatus 9 } gs2352pMSTI2TopologyChangeLast OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time passed since the Topology Flag was last set." ::= { gs2352pMSTI2BridgeSTPStatus 10 } gs2352pMSTI2PortStateTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pMSTI2PortStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show MSTI2 Ports and Aggregations State Configurations. " ::= { gs2352pMSTI2BridgeSTP 2 } gs2352pMSTI2PortStateEntry OBJECT-TYPE SYNTAX Gs2352pMSTI2PortStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pMSTI2PortStateIndex } ::= { gs2352pMSTI2PortStateTable 1 } Gs2352pMSTI2PortStateEntry ::= SEQUENCE { gs2352pMSTI2PortStateIndex Integer32, gs2352pMSTI2PortStatePort DisplayString, gs2352pMSTI2PortStatePortID DisplayString, gs2352pMSTI2PortStateRole DisplayString, gs2352pMSTI2PortStateState DisplayString, gs2352pMSTI2PortStatePathCost Integer32, gs2352pMSTI2PortStateEdge DisplayString, gs2352pMSTI2PortStatePoint2Point DisplayString, gs2352pMSTI2PortStateUptime DisplayString } gs2352pMSTI2PortStateIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "table index." ::= { gs2352pMSTI2PortStateEntry 1 } gs2352pMSTI2PortStatePort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port number of the logical STP port." ::= { gs2352pMSTI2PortStateEntry 2 } gs2352pMSTI2PortStatePortID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port." ::= { gs2352pMSTI2PortStateEntry 3 } gs2352pMSTI2PortStateRole OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port role." ::= { gs2352pMSTI2PortStateEntry 4 } gs2352pMSTI2PortStateState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port state." ::= { gs2352pMSTI2PortStateEntry 5 } gs2352pMSTI2PortStatePathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port path cost." ::= { gs2352pMSTI2PortStateEntry 6 } gs2352pMSTI2PortStateEdge OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port Edge Flag." ::= { gs2352pMSTI2PortStateEntry 7 } gs2352pMSTI2PortStatePoint2Point OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port point-to-point flag." ::= { gs2352pMSTI2PortStateEntry 8 } gs2352pMSTI2PortStateUptime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the bridge port was last initialized." ::= { gs2352pMSTI2PortStateEntry 9 } gs2352pMSTI3BridgeSTP OBJECT IDENTIFIER ::= { gs2352pSTPBridgeStatus 4 } gs2352pMSTI3BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2352pMSTI3BridgeSTP 1 } gs2352pMSTI3BridgeInstance OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge instance - CIST, MST1, ..." ::= { gs2352pMSTI3BridgeSTPStatus 1 } gs2352pMSTI3BridgeID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge ID of this Bridge instance." ::= { gs2352pMSTI3BridgeSTPStatus 2 } gs2352pMSTI3RootID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge ID of the currently elected root bridge." ::= { gs2352pMSTI3BridgeSTPStatus 3 } gs2352pMSTI3RootPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port currently assigned the root port role." ::= { gs2352pMSTI3BridgeSTPStatus 4 } gs2352pMSTI3RootCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Root Path Cost." ::= { gs2352pMSTI3BridgeSTPStatus 5 } gs2352pMSTI3TopologyFlag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the Topology Change Flag of this Bridge instance." ::= { gs2352pMSTI3BridgeSTPStatus 8 } gs2352pMSTI3TopologyChangeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times where the topology change flag has been set." ::= { gs2352pMSTI3BridgeSTPStatus 9 } gs2352pMSTI3TopologyChangeLast OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time passed since the Topology Flag was last set." ::= { gs2352pMSTI3BridgeSTPStatus 10 } gs2352pMSTI3PortStateTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pMSTI3PortStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show MSTI3 Ports and Aggregations State Configurations. " ::= { gs2352pMSTI3BridgeSTP 2 } gs2352pMSTI3PortStateEntry OBJECT-TYPE SYNTAX Gs2352pMSTI3PortStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pMSTI3PortStateIndex } ::= { gs2352pMSTI3PortStateTable 1 } Gs2352pMSTI3PortStateEntry ::= SEQUENCE { gs2352pMSTI3PortStateIndex Integer32, gs2352pMSTI3PortStatePort DisplayString, gs2352pMSTI3PortStatePortID DisplayString, gs2352pMSTI3PortStateRole DisplayString, gs2352pMSTI3PortStateState DisplayString, gs2352pMSTI3PortStatePathCost Integer32, gs2352pMSTI3PortStateEdge DisplayString, gs2352pMSTI3PortStatePoint2Point DisplayString, gs2352pMSTI3PortStateUptime DisplayString } gs2352pMSTI3PortStateIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "table index." ::= { gs2352pMSTI3PortStateEntry 1 } gs2352pMSTI3PortStatePort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port number of the logical STP port." ::= { gs2352pMSTI3PortStateEntry 2 } gs2352pMSTI3PortStatePortID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port." ::= { gs2352pMSTI3PortStateEntry 3 } gs2352pMSTI3PortStateRole OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port role." ::= { gs2352pMSTI3PortStateEntry 4 } gs2352pMSTI3PortStateState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port state." ::= { gs2352pMSTI3PortStateEntry 5 } gs2352pMSTI3PortStatePathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port path cost." ::= { gs2352pMSTI3PortStateEntry 6 } gs2352pMSTI3PortStateEdge OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port Edge Flag." ::= { gs2352pMSTI3PortStateEntry 7 } gs2352pMSTI3PortStatePoint2Point OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port point-to-point flag." ::= { gs2352pMSTI3PortStateEntry 8 } gs2352pMSTI3PortStateUptime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the bridge port was last initialized." ::= { gs2352pMSTI3PortStateEntry 9 } gs2352pMSTI4BridgeSTP OBJECT IDENTIFIER ::= { gs2352pSTPBridgeStatus 5 } gs2352pMSTI4BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2352pMSTI4BridgeSTP 1 } gs2352pMSTI4BridgeInstance OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge instance - CIST, MST1, ..." ::= { gs2352pMSTI4BridgeSTPStatus 1 } gs2352pMSTI4BridgeID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge ID of this Bridge instance." ::= { gs2352pMSTI4BridgeSTPStatus 2 } gs2352pMSTI4RootID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge ID of the currently elected root bridge." ::= { gs2352pMSTI4BridgeSTPStatus 3 } gs2352pMSTI4RootPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port currently assigned the root port role." ::= { gs2352pMSTI4BridgeSTPStatus 4 } gs2352pMSTI4RootCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Root Path Cost." ::= { gs2352pMSTI4BridgeSTPStatus 5 } gs2352pMSTI4TopologyFlag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the Topology Change Flag of this Bridge instance." ::= { gs2352pMSTI4BridgeSTPStatus 8 } gs2352pMSTI4TopologyChangeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times where the topology change flag has been set." ::= { gs2352pMSTI4BridgeSTPStatus 9 } gs2352pMSTI4TopologyChangeLast OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time passed since the Topology Flag was last set." ::= { gs2352pMSTI4BridgeSTPStatus 10 } gs2352pMSTI4PortStateTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pMSTI4PortStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show MSTI4 Ports and Aggregations State Configurations. " ::= { gs2352pMSTI4BridgeSTP 2 } gs2352pMSTI4PortStateEntry OBJECT-TYPE SYNTAX Gs2352pMSTI4PortStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pMSTI4PortStateIndex } ::= { gs2352pMSTI4PortStateTable 1 } Gs2352pMSTI4PortStateEntry ::= SEQUENCE { gs2352pMSTI4PortStateIndex Integer32, gs2352pMSTI4PortStatePort DisplayString, gs2352pMSTI4PortStatePortID DisplayString, gs2352pMSTI4PortStateRole DisplayString, gs2352pMSTI4PortStateState DisplayString, gs2352pMSTI4PortStatePathCost Integer32, gs2352pMSTI4PortStateEdge DisplayString, gs2352pMSTI4PortStatePoint2Point DisplayString, gs2352pMSTI4PortStateUptime DisplayString } gs2352pMSTI4PortStateIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "table index." ::= { gs2352pMSTI4PortStateEntry 1 } gs2352pMSTI4PortStatePort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port number of the logical STP port." ::= { gs2352pMSTI4PortStateEntry 2 } gs2352pMSTI4PortStatePortID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port." ::= { gs2352pMSTI4PortStateEntry 3 } gs2352pMSTI4PortStateRole OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port role." ::= { gs2352pMSTI4PortStateEntry 4 } gs2352pMSTI4PortStateState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port state." ::= { gs2352pMSTI4PortStateEntry 5 } gs2352pMSTI4PortStatePathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port path cost." ::= { gs2352pMSTI4PortStateEntry 6 } gs2352pMSTI4PortStateEdge OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port Edge Flag." ::= { gs2352pMSTI4PortStateEntry 7 } gs2352pMSTI4PortStatePoint2Point OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port point-to-point flag." ::= { gs2352pMSTI4PortStateEntry 8 } gs2352pMSTI4PortStateUptime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the bridge port was last initialized." ::= { gs2352pMSTI4PortStateEntry 9 } gs2352pMSTI5BridgeSTP OBJECT IDENTIFIER ::= { gs2352pSTPBridgeStatus 6 } gs2352pMSTI5BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2352pMSTI5BridgeSTP 1 } gs2352pMSTI5BridgeInstance OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge instance - CIST, MST1, ..." ::= { gs2352pMSTI5BridgeSTPStatus 1 } gs2352pMSTI5BridgeID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge ID of this Bridge instance." ::= { gs2352pMSTI5BridgeSTPStatus 2 } gs2352pMSTI5RootID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge ID of the currently elected root bridge." ::= { gs2352pMSTI5BridgeSTPStatus 3 } gs2352pMSTI5RootPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port currently assigned the root port role." ::= { gs2352pMSTI5BridgeSTPStatus 4 } gs2352pMSTI5RootCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Root Path Cost." ::= { gs2352pMSTI5BridgeSTPStatus 5 } gs2352pMSTI5TopologyFlag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the Topology Change Flag of this Bridge instance." ::= { gs2352pMSTI5BridgeSTPStatus 8 } gs2352pMSTI5TopologyChangeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times where the topology change flag has been set." ::= { gs2352pMSTI5BridgeSTPStatus 9 } gs2352pMSTI5TopologyChangeLast OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time passed since the Topology Flag was last set." ::= { gs2352pMSTI5BridgeSTPStatus 10 } gs2352pMSTI5PortStateTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pMSTI5PortStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show MSTI5 Ports and Aggregations State Configurations. " ::= { gs2352pMSTI5BridgeSTP 2 } gs2352pMSTI5PortStateEntry OBJECT-TYPE SYNTAX Gs2352pMSTI5PortStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pMSTI5PortStateIndex } ::= { gs2352pMSTI5PortStateTable 1 } Gs2352pMSTI5PortStateEntry ::= SEQUENCE { gs2352pMSTI5PortStateIndex Integer32, gs2352pMSTI5PortStatePort DisplayString, gs2352pMSTI5PortStatePortID DisplayString, gs2352pMSTI5PortStateRole DisplayString, gs2352pMSTI5PortStateState DisplayString, gs2352pMSTI5PortStatePathCost Integer32, gs2352pMSTI5PortStateEdge DisplayString, gs2352pMSTI5PortStatePoint2Point DisplayString, gs2352pMSTI5PortStateUptime DisplayString } gs2352pMSTI5PortStateIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "table index." ::= { gs2352pMSTI5PortStateEntry 1 } gs2352pMSTI5PortStatePort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port number of the logical STP port." ::= { gs2352pMSTI5PortStateEntry 2 } gs2352pMSTI5PortStatePortID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port." ::= { gs2352pMSTI5PortStateEntry 3 } gs2352pMSTI5PortStateRole OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port role." ::= { gs2352pMSTI5PortStateEntry 4 } gs2352pMSTI5PortStateState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port state." ::= { gs2352pMSTI5PortStateEntry 5 } gs2352pMSTI5PortStatePathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port path cost." ::= { gs2352pMSTI5PortStateEntry 6 } gs2352pMSTI5PortStateEdge OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port Edge Flag." ::= { gs2352pMSTI5PortStateEntry 7 } gs2352pMSTI5PortStatePoint2Point OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port point-to-point flag." ::= { gs2352pMSTI5PortStateEntry 8 } gs2352pMSTI5PortStateUptime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the bridge port was last initialized." ::= { gs2352pMSTI5PortStateEntry 9 } gs2352pMSTI6BridgeSTP OBJECT IDENTIFIER ::= { gs2352pSTPBridgeStatus 7 } gs2352pMSTI6BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2352pMSTI6BridgeSTP 1 } gs2352pMSTI6BridgeInstance OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge instance - CIST, MST1, ..." ::= { gs2352pMSTI6BridgeSTPStatus 1 } gs2352pMSTI6BridgeID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge ID of this Bridge instance." ::= { gs2352pMSTI6BridgeSTPStatus 2 } gs2352pMSTI6RootID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge ID of the currently elected root bridge." ::= { gs2352pMSTI6BridgeSTPStatus 3 } gs2352pMSTI6RootPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port currently assigned the root port role." ::= { gs2352pMSTI6BridgeSTPStatus 4 } gs2352pMSTI6RootCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Root Path Cost." ::= { gs2352pMSTI6BridgeSTPStatus 5 } gs2352pMSTI6TopologyFlag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the Topology Change Flag of this Bridge instance." ::= { gs2352pMSTI6BridgeSTPStatus 8 } gs2352pMSTI6TopologyChangeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times where the topology change flag has been set." ::= { gs2352pMSTI6BridgeSTPStatus 9 } gs2352pMSTI6TopologyChangeLast OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time passed since the Topology Flag was last set." ::= { gs2352pMSTI6BridgeSTPStatus 10 } gs2352pMSTI6PortStateTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pMSTI6PortStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show MSTI6 Ports and Aggregations State Configurations. " ::= { gs2352pMSTI6BridgeSTP 2 } gs2352pMSTI6PortStateEntry OBJECT-TYPE SYNTAX Gs2352pMSTI6PortStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pMSTI6PortStateIndex } ::= { gs2352pMSTI6PortStateTable 1 } Gs2352pMSTI6PortStateEntry ::= SEQUENCE { gs2352pMSTI6PortStateIndex Integer32, gs2352pMSTI6PortStatePort DisplayString, gs2352pMSTI6PortStatePortID DisplayString, gs2352pMSTI6PortStateRole DisplayString, gs2352pMSTI6PortStateState DisplayString, gs2352pMSTI6PortStatePathCost Integer32, gs2352pMSTI6PortStateEdge DisplayString, gs2352pMSTI6PortStatePoint2Point DisplayString, gs2352pMSTI6PortStateUptime DisplayString } gs2352pMSTI6PortStateIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "table index." ::= { gs2352pMSTI6PortStateEntry 1 } gs2352pMSTI6PortStatePort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port number of the logical STP port." ::= { gs2352pMSTI6PortStateEntry 2 } gs2352pMSTI6PortStatePortID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port." ::= { gs2352pMSTI6PortStateEntry 3 } gs2352pMSTI6PortStateRole OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port role." ::= { gs2352pMSTI6PortStateEntry 4 } gs2352pMSTI6PortStateState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port state." ::= { gs2352pMSTI6PortStateEntry 5 } gs2352pMSTI6PortStatePathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port path cost." ::= { gs2352pMSTI6PortStateEntry 6 } gs2352pMSTI6PortStateEdge OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port Edge Flag." ::= { gs2352pMSTI6PortStateEntry 7 } gs2352pMSTI6PortStatePoint2Point OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port point-to-point flag." ::= { gs2352pMSTI6PortStateEntry 8 } gs2352pMSTI6PortStateUptime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the bridge port was last initialized." ::= { gs2352pMSTI6PortStateEntry 9 } gs2352pMSTI7BridgeSTP OBJECT IDENTIFIER ::= { gs2352pSTPBridgeStatus 8 } gs2352pMSTI7BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2352pMSTI7BridgeSTP 1 } gs2352pMSTI7BridgeInstance OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge instance - CIST, MST1, ..." ::= { gs2352pMSTI7BridgeSTPStatus 1 } gs2352pMSTI7BridgeID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge ID of this Bridge instance." ::= { gs2352pMSTI7BridgeSTPStatus 2 } gs2352pMSTI7RootID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge ID of the currently elected root bridge." ::= { gs2352pMSTI7BridgeSTPStatus 3 } gs2352pMSTI7RootPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port currently assigned the root port role." ::= { gs2352pMSTI7BridgeSTPStatus 4 } gs2352pMSTI7RootCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Root Path Cost." ::= { gs2352pMSTI7BridgeSTPStatus 5 } gs2352pMSTI7TopologyFlag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the Topology Change Flag of this Bridge instance." ::= { gs2352pMSTI7BridgeSTPStatus 8 } gs2352pMSTI7TopologyChangeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times where the topology change flag has been set." ::= { gs2352pMSTI7BridgeSTPStatus 9 } gs2352pMSTI7TopologyChangeLast OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time passed since the Topology Flag was last set." ::= { gs2352pMSTI7BridgeSTPStatus 10 } gs2352pMSTI7PortStateTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pMSTI7PortStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show MSTI7 Ports and Aggregations State Configurations. " ::= { gs2352pMSTI7BridgeSTP 2 } gs2352pMSTI7PortStateEntry OBJECT-TYPE SYNTAX Gs2352pMSTI7PortStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pMSTI7PortStateIndex } ::= { gs2352pMSTI7PortStateTable 1 } Gs2352pMSTI7PortStateEntry ::= SEQUENCE { gs2352pMSTI7PortStateIndex Integer32, gs2352pMSTI7PortStatePort DisplayString, gs2352pMSTI7PortStatePortID DisplayString, gs2352pMSTI7PortStateRole DisplayString, gs2352pMSTI7PortStateState DisplayString, gs2352pMSTI7PortStatePathCost Integer32, gs2352pMSTI7PortStateEdge DisplayString, gs2352pMSTI7PortStatePoint2Point DisplayString, gs2352pMSTI7PortStateUptime DisplayString } gs2352pMSTI7PortStateIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "table index." ::= { gs2352pMSTI7PortStateEntry 1 } gs2352pMSTI7PortStatePort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port number of the logical STP port." ::= { gs2352pMSTI7PortStateEntry 2 } gs2352pMSTI7PortStatePortID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port." ::= { gs2352pMSTI7PortStateEntry 3 } gs2352pMSTI7PortStateRole OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port role." ::= { gs2352pMSTI7PortStateEntry 4 } gs2352pMSTI7PortStateState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port state." ::= { gs2352pMSTI7PortStateEntry 5 } gs2352pMSTI7PortStatePathCost OBJECT-TYPE SYNTAX Integer32(0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port path cost." ::= { gs2352pMSTI7PortStateEntry 6 } gs2352pMSTI7PortStateEdge OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port Edge Flag." ::= { gs2352pMSTI7PortStateEntry 7 } gs2352pMSTI7PortStatePoint2Point OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current STP port point-to-point flag." ::= { gs2352pMSTI7PortStateEntry 8 } gs2352pMSTI7PortStateUptime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the bridge port was last initialized." ::= { gs2352pMSTI7PortStateEntry 9 } gs2352pSTPPortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pSTPPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show STP Port Status." ::= { gs2352pSTP 9 } gs2352pSTPPortStatusEntry OBJECT-TYPE SYNTAX Gs2352pSTPPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pSTPPortStatusPort } ::= { gs2352pSTPPortStatusTable 1 } Gs2352pSTPPortStatusEntry ::= SEQUENCE { gs2352pSTPPortStatusPort Integer32, gs2352pSTPPortStatusCISTRole DisplayString, gs2352pSTPPortStatusCISTState DisplayString, gs2352pSTPPortStatusUptime DisplayString } gs2352pSTPPortStatusPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pSTPPortStatusEntry 1 } gs2352pSTPPortStatusCISTRole OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The current STP port role of the CIST port. " ::= { gs2352pSTPPortStatusEntry 2 } gs2352pSTPPortStatusCISTState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The current STP port state of the CIST port. " ::= { gs2352pSTPPortStatusEntry 3 } gs2352pSTPPortStatusUptime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The time since the bridge port was last initialized. " ::= { gs2352pSTPPortStatusEntry 4 } gs2352pSTPPortStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pSTPPortStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show STP Port Statistics." ::= { gs2352pSTP 10 } gs2352pSTPPortStatisticsEntry OBJECT-TYPE SYNTAX Gs2352pSTPPortStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pSTPStatisticsIndex } ::= { gs2352pSTPPortStatisticsTable 1 } Gs2352pSTPPortStatisticsEntry ::= SEQUENCE { gs2352pSTPStatisticsIndex Integer32, gs2352pSTPStatisticsPort DisplayString, gs2352pSTPStatisticsTxMSTP Counter32, gs2352pSTPStatisticsTxRSTP Counter32, gs2352pSTPStatisticsTxSTP Counter32, gs2352pSTPStatisticsTxTCN Counter32, gs2352pSTPStatisticsRxMSTP Counter32, gs2352pSTPStatisticsRxRSTP Counter32, gs2352pSTPStatisticsRxSTP Counter32, gs2352pSTPStatisticsRxTCN Counter32, gs2352pSTPStatisticsDiscardedUnknown Counter32, gs2352pSTPStatisticsDiscardedIllegal Counter32 } gs2352pSTPStatisticsIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "table index." ::= { gs2352pSTPPortStatisticsEntry 1 } gs2352pSTPStatisticsPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pSTPPortStatisticsEntry 2 } gs2352pSTPStatisticsTxMSTP OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of MSTP Configuration BPDU's received/transmitted on the port." ::= { gs2352pSTPPortStatisticsEntry 3 } gs2352pSTPStatisticsTxRSTP OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of RSTP Configuration BPDU's received/transmitted on the port. " ::= { gs2352pSTPPortStatisticsEntry 4 } gs2352pSTPStatisticsTxSTP OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of legacy STP Configuration BPDU's received/transmitted on the port. " ::= { gs2352pSTPPortStatisticsEntry 5 } gs2352pSTPStatisticsTxTCN OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Topology Change Notification BPDU's received/transmitted on the port. " ::= { gs2352pSTPPortStatisticsEntry 6 } gs2352pSTPStatisticsRxMSTP OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of MSTP Configuration BPDU's received/transmitted on the port." ::= { gs2352pSTPPortStatisticsEntry 7 } gs2352pSTPStatisticsRxRSTP OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of RSTP Configuration BPDU's received/transmitted on the port. " ::= { gs2352pSTPPortStatisticsEntry 8 } gs2352pSTPStatisticsRxSTP OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of legacy STP Configuration BPDU's received/transmitted on the port. " ::= { gs2352pSTPPortStatisticsEntry 9 } gs2352pSTPStatisticsRxTCN OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Topology Change Notification BPDU's received/transmitted on the port. " ::= { gs2352pSTPPortStatisticsEntry 10 } gs2352pSTPStatisticsDiscardedUnknown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of unknown Spanning Tree BPDU's received and discarded on the port. " ::= { gs2352pSTPPortStatisticsEntry 11 } gs2352pSTPStatisticsDiscardedIllegal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of illegal Spanning Tree BPDU's received and discarded on the port. " ::= { gs2352pSTPPortStatisticsEntry 12 } gs2352pFilteringDataBase OBJECT IDENTIFIER ::= { gs2352pConfiguration 21 } gs2352pFilteringDataBaseConfig OBJECT IDENTIFIER ::= { gs2352pFilteringDataBase 1 } gs2352pFilteringDataBaseAgingTime OBJECT-TYPE SYNTAX Integer32(0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure aging time by entering a value here in seconds. default: 300, range: 10-1000000. Disable automatic aging : 0." ::= { gs2352pFilteringDataBaseConfig 1 } gs2352pFilteringDataBaseConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PFilteringDataBaseConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pFilteringDataBaseConfig 2 } gs2352pFilteringDataBaseConfigEntry OBJECT-TYPE SYNTAX GS2352PFilteringDataBaseConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pFilteringDataBaseConfigPort } ::= { gs2352pFilteringDataBaseConfigTable 1 } GS2352PFilteringDataBaseConfigEntry ::= SEQUENCE { gs2352pFilteringDataBaseConfigPort Integer32, gs2352pFilteringDataBaseConfigLearning INTEGER } gs2352pFilteringDataBaseConfigPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pFilteringDataBaseConfigEntry 1 } gs2352pFilteringDataBaseConfigLearning OBJECT-TYPE SYNTAX INTEGER { auto(0), disable(1), secure(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure learning mode of switch ports. default: 0, 0: auto, 1: disable, 2: secure. " ::= { gs2352pFilteringDataBaseConfigEntry 2 } gs2352pFilteringDataBaseStaticMAC OBJECT IDENTIFIER ::= { gs2352pFilteringDataBaseConfig 3 } gs2352pFilteringDataBaseStaticMACCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create Static MAC Table" ::= { gs2352pFilteringDataBaseStaticMAC 1 } gs2352pFilteringDataBaseStaticMACTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PFilteringDataBaseStaticMACEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pFilteringDataBaseStaticMAC 2 } gs2352pFilteringDataBaseStaticMACEntry OBJECT-TYPE SYNTAX GS2352PFilteringDataBaseStaticMACEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pFilteringDataBaseStaticMACIndex } ::= { gs2352pFilteringDataBaseStaticMACTable 1 } GS2352PFilteringDataBaseStaticMACEntry ::= SEQUENCE { gs2352pFilteringDataBaseStaticMACIndex Integer32, gs2352pFilteringDataBaseStaticMACVLANId Integer32, gs2352pFilteringDataBaseStaticMACAddress MacAddress, gs2352pFilteringDataBaseStaticMACPortMembers DisplayString, gs2352pFilteringDataBaseStaticMACRowStatus INTEGER } gs2352pFilteringDataBaseStaticMACIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pFilteringDataBaseStaticMACEntry 1 } gs2352pFilteringDataBaseStaticMACVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN ID, range: 1 - 4094. " ::= { gs2352pFilteringDataBaseStaticMACEntry 2 } gs2352pFilteringDataBaseStaticMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " MAC address, format 0a 1b 2c 3d 4e 5f " ::= { gs2352pFilteringDataBaseStaticMACEntry 3 } gs2352pFilteringDataBaseStaticMACPortMembers OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "To include the ports in a Static MAC Table" ::= { gs2352pFilteringDataBaseStaticMACEntry 4 } gs2352pFilteringDataBaseStaticMACRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy 5: undo" ::= { gs2352pFilteringDataBaseStaticMACEntry 5 } gs2352pFilteringDataBaseDynamicMACTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PFilteringDataBaseDynamicMACEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pFilteringDataBaseConfig 4 } gs2352pFilteringDataBaseDynamicMACEntry OBJECT-TYPE SYNTAX GS2352PFilteringDataBaseDynamicMACEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pFilteringDataBaseDynamicMACIndex } ::= { gs2352pFilteringDataBaseDynamicMACTable 1 } GS2352PFilteringDataBaseDynamicMACEntry ::= SEQUENCE { gs2352pFilteringDataBaseDynamicMACIndex Integer32, gs2352pFilteringDataBaseDynamicMACType INTEGER, gs2352pFilteringDataBaseDynamicMACVLAN Integer32, gs2352pFilteringDataBaseDynamicMACAddress MacAddress, gs2352pFilteringDataBaseDynamicPortMembers DisplayString } gs2352pFilteringDataBaseDynamicMACIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pFilteringDataBaseDynamicMACEntry 1 } gs2352pFilteringDataBaseDynamicMACType OBJECT-TYPE SYNTAX INTEGER { dynamic(0), static(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the entry is a static or a dynamic entry." ::= { gs2352pFilteringDataBaseDynamicMACEntry 2 } gs2352pFilteringDataBaseDynamicMACVLAN OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID of the entry." ::= { gs2352pFilteringDataBaseDynamicMACEntry 3 } gs2352pFilteringDataBaseDynamicMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the entry." ::= { gs2352pFilteringDataBaseDynamicMACEntry 4 } gs2352pFilteringDataBaseDynamicPortMembers OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The ports that are members of the entry." ::= { gs2352pFilteringDataBaseDynamicMACEntry 5 } gs2352pSFlowAgent OBJECT IDENTIFIER ::= { gs2352pConfiguration 22 } gs2352pSFlowAgentCollector OBJECT IDENTIFIER ::= { gs2352pSFlowAgent 1 } gs2352pSFlowAgentReceiverMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2352pSFlowAgentCollector 1 } gs2352pLMC OBJECT IDENTIFIER ::= { gs2352pConfiguration 1500 } gs2352pLMCOperating OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1), try(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "0: disabled 1: enabled 2: try" ::= { gs2352pLMC 1 } gs2352pLMCConfigViaDhcp OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0: disabled 1: enabled" ::= { gs2352pLMC 2 } gs2352pLMCDomain OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "0: disabled 1: enabled" ::= { gs2352pLMC 3 } gs2352pLMCDhcpClientAutoRenew OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0: disabled 1: enabled" ::= { gs2352pLMC 4 } gs2352pLMCZeroTouchSupport OBJECT-TYPE SYNTAX INTEGER { No(0), Yes(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "0: No 1: Yes" ::= { gs2352pLMC 50 } gs2352pLMCPairingTokenPresent OBJECT-TYPE SYNTAX INTEGER { No(0), Yes(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "0: No 1: Yes" ::= { gs2352pLMC 51 } gs2352pLMCClientStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pLMC 52 } gs2352pLMCManagementStatus OBJECT-TYPE SYNTAX INTEGER {Unpaired(0), Paired(1), PairedAndClaimed(14)} MAX-ACCESS read-only STATUS current DESCRIPTION "0: Unpaired 1: Paired 14: PairedAndClaimed" ::= { gs2352pLMC 53 } gs2352pLMCControlStatus OBJECT-TYPE SYNTAX INTEGER {Disabled(2), Operating(4)} MAX-ACCESS read-only STATUS current DESCRIPTION "2: Disabled 4: Operating" ::= { gs2352pLMC 54 } gs2352pLMCMonitoringStatus OBJECT-TYPE SYNTAX INTEGER {Disabled(2), Operating(4)} MAX-ACCESS read-only STATUS current DESCRIPTION "2: Disabled 4: Operating" ::= { gs2352pLMC 55 } gs2352pLMCConfigurationSource OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pLMC 56 } gs2352pLMCConfigModified OBJECT-TYPE SYNTAX INTEGER { No(0), Yes(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "0: No 1: Yes" ::= { gs2352pLMC 57 } gs2352pLMCDeviceID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pLMC 58 } gs2352pLMCRoundTripTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pLMC 100 } ---------------------------------------------------------------------------------------------------------------------------- gs2352pSecurity OBJECT IDENTIFIER ::= { lancomGS2352P 3 } gs2352pIPSourceGuard OBJECT IDENTIFIER ::= { gs2352pSecurity 1 } gs2352pIPSourceGuardConf OBJECT IDENTIFIER ::= { gs2352pIPSourceGuard 1 } gs2352pIPSourceGuardMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 0 0: disable 1: enable" ::= { gs2352pIPSourceGuardConf 1 } gs2352pIPSourceGuardPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PIPSourceGuardPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pIPSourceGuardConf 2 } gs2352pIPSourceGuardPortConfigEntry OBJECT-TYPE SYNTAX GS2352PIPSourceGuardPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pIPSourceGuardPortConfigPort } ::= { gs2352pIPSourceGuardPortConfigTable 1 } GS2352PIPSourceGuardPortConfigEntry ::= SEQUENCE { gs2352pIPSourceGuardPortConfigPort Integer32, gs2352pIPSourceGuardPortConfigMode INTEGER, gs2352pIPSourceGuardPortMaxDynamicClients Integer32 } gs2352pIPSourceGuardPortConfigPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pIPSourceGuardPortConfigEntry 1 } gs2352pIPSourceGuardPortConfigMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:disable 1:enable " ::= { gs2352pIPSourceGuardPortConfigEntry 2 } gs2352pIPSourceGuardPortMaxDynamicClients OBJECT-TYPE SYNTAX Integer32(0..2|99) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 99 0~2: Max Dynamic clients 99:Unlimited " ::= { gs2352pIPSourceGuardPortConfigEntry 3 } gs2352pIPSourceGuardStatic OBJECT IDENTIFIER ::= { gs2352pIPSourceGuard 2 } gs2352pIPSourceGuardStaticCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create a IP Source Guard" ::= { gs2352pIPSourceGuardStatic 1 } gs2352pIPSourceGuardStaticTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PIPSourceGuardStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pIPSourceGuardStatic 2 } gs2352pIPSourceGuardStaticEntry OBJECT-TYPE SYNTAX GS2352PIPSourceGuardStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pIPSourceGuardStaticIndex } ::= { gs2352pIPSourceGuardStaticTable 1 } GS2352PIPSourceGuardStaticEntry ::= SEQUENCE { gs2352pIPSourceGuardStaticIndex Integer32, gs2352pIPSourceGuardStaticPort Integer32, gs2352pIPSourceGuardStaticVLANId Integer32, gs2352pIPSourceGuardStaticIPAddress IpAddress, gs2352pIPSourceGuardStaticMACAddress MacAddress, gs2352pIPSourceGuardStaticRowStatus INTEGER } gs2352pIPSourceGuardStaticIndex OBJECT-TYPE SYNTAX Integer32(1..28) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pIPSourceGuardStaticEntry 1 } gs2352pIPSourceGuardStaticPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION " Port, range: 1 - port number. " ::= { gs2352pIPSourceGuardStaticEntry 2 } gs2352pIPSourceGuardStaticVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN ID, range: 1 - 4094. " ::= { gs2352pIPSourceGuardStaticEntry 3 } gs2352pIPSourceGuardStaticIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " IP address allowed for doing IP source guard. " ::= { gs2352pIPSourceGuardStaticEntry 4 } gs2352pIPSourceGuardStaticMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " Allowed Source MAC address, format 0a 1b 2c 3d 4e 5f " ::= { gs2352pIPSourceGuardStaticEntry 5 } gs2352pIPSourceGuardStaticRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), edit(3), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 3: edit 4: destroy 5: undo" ::= { gs2352pIPSourceGuardStaticEntry 6 } gs2352pIPSourceGuardDynamicTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PIPSourceGuardDynamicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pIPSourceGuard 3 } gs2352pIPSourceGuardDynamicEntry OBJECT-TYPE SYNTAX GS2352PIPSourceGuardDynamicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pIPSourceGuardDynamicIndex } ::= { gs2352pIPSourceGuardDynamicTable 1 } GS2352PIPSourceGuardDynamicEntry ::= SEQUENCE { gs2352pIPSourceGuardDynamicIndex Integer32, gs2352pIPSourceGuardDynamicPort Integer32, gs2352pIPSourceGuardDynamicVLANId Integer32, gs2352pIPSourceGuardDynamicIPAddress IpAddress, gs2352pIPSourceGuardDynamicMACAddress MacAddress } gs2352pIPSourceGuardDynamicIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pIPSourceGuardDynamicEntry 1 } gs2352pIPSourceGuardDynamicPort OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pIPSourceGuardDynamicEntry 2 } gs2352pIPSourceGuardDynamicVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pIPSourceGuardDynamicEntry 3 } gs2352pIPSourceGuardDynamicIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pIPSourceGuardDynamicEntry 4 } gs2352pIPSourceGuardDynamicMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pIPSourceGuardDynamicEntry 5 } gs2352pARPInspection OBJECT IDENTIFIER ::= { gs2352pSecurity 2 } gs2352pARPInspectionConf OBJECT IDENTIFIER ::= { gs2352pARPInspection 1 } gs2352pARPInspectionConfMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable" ::= { gs2352pARPInspectionConf 1 } gs2352pARPInspectionConfTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PARPInspectionConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pARPInspectionConf 2 } gs2352pARPInspectionConfEntry OBJECT-TYPE SYNTAX GS2352PARPInspectionConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pARPInspectionConfPortIndex } ::= { gs2352pARPInspectionConfTable 1 } GS2352PARPInspectionConfEntry ::= SEQUENCE { gs2352pARPInspectionConfPortIndex Integer32, gs2352pARPInspectionConfPortMode INTEGER } gs2352pARPInspectionConfPortIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pARPInspectionConfEntry 1 } gs2352pARPInspectionConfPortMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable" ::= { gs2352pARPInspectionConfEntry 2 } gs2352pARPInspectionStatic OBJECT IDENTIFIER ::= { gs2352pARPInspection 2 } gs2352pARPInspectionStaticCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: create" ::= { gs2352pARPInspectionStatic 1 } gs2352pARPInspectionStaticTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PARPInspectionStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pARPInspectionStatic 2 } gs2352pARPInspectionStaticEntry OBJECT-TYPE SYNTAX GS2352PARPInspectionStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pARPInspectionStaticIndex } ::= { gs2352pARPInspectionStaticTable 1 } GS2352PARPInspectionStaticEntry ::= SEQUENCE { gs2352pARPInspectionStaticIndex Integer32, gs2352pARPInspectionStaticPort Integer32, gs2352pARPInspectionStaticVLANId Integer32, gs2352pARPInspectionStaticIPAddress IpAddress, gs2352pARPInspectionStaticMACAddress MacAddress, gs2352pARPInspectionStaticRowStatus INTEGER } gs2352pARPInspectionStaticIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { gs2352pARPInspectionStaticEntry 1 } gs2352pARPInspectionStaticPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION " Port, range: 1 - port number. " ::= { gs2352pARPInspectionStaticEntry 2 } gs2352pARPInspectionStaticVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN ID, range: 1 - 4094. " ::= { gs2352pARPInspectionStaticEntry 3 } gs2352pARPInspectionStaticIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " IP address allowed for doing ARP request. " ::= { gs2352pARPInspectionStaticEntry 4 } gs2352pARPInspectionStaticMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " Allowed Source MAC address in ARP request packets, format 0a 1b 2c 3d 4e 5f " ::= { gs2352pARPInspectionStaticEntry 5 } gs2352pARPInspectionStaticRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), edit(3), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 3: edit 4: destroy 5: undo" ::= { gs2352pARPInspectionStaticEntry 6 } gs2352pARPInspectionDynamicTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PARPInspectionDynamicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pARPInspection 3 } gs2352pARPInspectionDynamicEntry OBJECT-TYPE SYNTAX GS2352PARPInspectionDynamicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pARPInspectionDynamicIndex } ::= { gs2352pARPInspectionDynamicTable 1 } GS2352PARPInspectionDynamicEntry ::= SEQUENCE { gs2352pARPInspectionDynamicIndex Integer32, gs2352pARPInspectionDynamicPort Integer32, gs2352pARPInspectionDynamicVLANId Integer32, gs2352pARPInspectionDynamicIPAddress IpAddress, gs2352pARPInspectionDynamicMACAddress MacAddress } gs2352pARPInspectionDynamicIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pARPInspectionDynamicEntry 1 } gs2352pARPInspectionDynamicPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pARPInspectionDynamicEntry 2 } gs2352pARPInspectionDynamicVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pARPInspectionDynamicEntry 3 } gs2352pARPInspectionDynamicIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pARPInspectionDynamicEntry 4 } gs2352pARPInspectionDynamicMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pARPInspectionDynamicEntry 5 } gs2352pARPStaticGatewayCtrl OBJECT IDENTIFIER ::= { gs2352pARPInspection 6 } gs2352pARPStaticGatewayCtrlSystemConf OBJECT IDENTIFIER ::= { gs2352pARPStaticGatewayCtrl 1 } gs2352pARPStaticGatewayCtrlMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2352pARPStaticGatewayCtrlSystemConf 1 } gs2352pARPStaticGatewayCtrlCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: create" ::= { gs2352pARPStaticGatewayCtrl 2 } gs2352pARPStaticGatewayCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PARPStaticGatewayCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pARPStaticGatewayCtrl 3 } gs2352pARPStaticGatewayCtrlEntry OBJECT-TYPE SYNTAX GS2352PARPStaticGatewayCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pARPStaticGatewayCtrlIndex } ::= { gs2352pARPStaticGatewayCtrlTable 1 } GS2352PARPStaticGatewayCtrlEntry ::= SEQUENCE { gs2352pARPStaticGatewayCtrlIndex Integer32, gs2352pARPStaticGatewayCtrlIPAddress IpAddress, gs2352pARPStaticGatewayCtrlMACAddress MacAddress, gs2352pARPStaticGatewayCtrlPort Integer32, gs2352pARPStaticGatewayCtrlAction INTEGER, gs2352pARPStaticGatewayCtrlState DisplayString, gs2352pARPStaticGatewayCtrlReOpen INTEGER, gs2352pARPStaticGatewayCtrlRowStatus INTEGER } gs2352pARPStaticGatewayCtrlIndex OBJECT-TYPE SYNTAX Integer32(1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { gs2352pARPStaticGatewayCtrlEntry 1 } gs2352pARPStaticGatewayCtrlIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " Source IP address. " ::= { gs2352pARPStaticGatewayCtrlEntry 2 } gs2352pARPStaticGatewayCtrlMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " Source MAC address , format 0a 1b 2c 3d 4e 5f " ::= { gs2352pARPStaticGatewayCtrlEntry 3 } gs2352pARPStaticGatewayCtrlPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION " Port, range: 1 - port number. " ::= { gs2352pARPStaticGatewayCtrlEntry 4 } gs2352pARPStaticGatewayCtrlAction OBJECT-TYPE SYNTAX INTEGER {none(0),trap(1),dropAndTrap(2), shutdown(3), trapAndShutdown(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: trap 2: drop&trap 3: shutdown 4: trap&shutdown" ::= { gs2352pARPStaticGatewayCtrlEntry 5 } gs2352pARPStaticGatewayCtrlState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pARPStaticGatewayCtrlEntry 6 } gs2352pARPStaticGatewayCtrlReOpen OBJECT-TYPE SYNTAX INTEGER { none(0), reopen(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: reopen" ::= { gs2352pARPStaticGatewayCtrlEntry 7 } gs2352pARPStaticGatewayCtrlRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), edit(3), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 3: edit 4: destroy 5: undo" ::= { gs2352pARPStaticGatewayCtrlEntry 8 } gs2352pARPSpoofingPrevention OBJECT IDENTIFIER ::= { gs2352pARPInspection 7 } gs2352pARPSpoofingPreventionSystemConf OBJECT IDENTIFIER ::= { gs2352pARPSpoofingPrevention 1 } gs2352pARPSpoofingPreventionMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2352pARPSpoofingPreventionSystemConf 1 } gs2352pARPSpoofingPreventionTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PARPSpoofingPreventionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pARPSpoofingPrevention 2 } gs2352pARPSpoofingPreventionEntry OBJECT-TYPE SYNTAX GS2352PARPSpoofingPreventionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pARPSpoofingPreventionPort } ::= { gs2352pARPSpoofingPreventionTable 1 } GS2352PARPSpoofingPreventionEntry ::= SEQUENCE { gs2352pARPSpoofingPreventionPort Integer32, gs2352pARPSpoofingPreventionPortMode INTEGER, gs2352pARPSpoofingPreventionPortLimit Integer32, gs2352pARPSpoofingPreventionPortAction INTEGER, gs2352pARPSpoofingPreventionPortState DisplayString, gs2352pARPSpoofingPreventionPortReOpen INTEGER } gs2352pARPSpoofingPreventionPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pARPSpoofingPreventionEntry 1 } gs2352pARPSpoofingPreventionPortMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable" ::= { gs2352pARPSpoofingPreventionEntry 2 } gs2352pARPSpoofingPreventionPortLimit OBJECT-TYPE SYNTAX Integer32(1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1, range: 1-100" ::= { gs2352pARPSpoofingPreventionEntry 3 } gs2352pARPSpoofingPreventionPortAction OBJECT-TYPE SYNTAX INTEGER { none(0), trap(1), dropAndTrap(2), shutdown(3), trapAndShutdown(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: trap 2: drop&trap 3: shutdown 4: trap&shutdown" ::= { gs2352pARPSpoofingPreventionEntry 4 } gs2352pARPSpoofingPreventionPortState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pARPSpoofingPreventionEntry 5 } gs2352pARPSpoofingPreventionPortReOpen OBJECT-TYPE SYNTAX INTEGER { none(0), reopen(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: reopen" ::= { gs2352pARPSpoofingPreventionEntry 6 } gs2352pARPIPDoSPrevention OBJECT IDENTIFIER ::= { gs2352pARPInspection 8 } gs2352pARPIPDoSPreventionTCPMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2352pARPIPDoSPrevention 1 } gs2352pARPIPDoSPreventionUDPMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2352pARPIPDoSPrevention 2 } gs2352pARPIPDoSPreventionICMPMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2352pARPIPDoSPrevention 3 } gs2352pARPIPDoSPreventionServerPort1 OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " Port, range: 0 - port number. 0: none. " ::= { gs2352pARPIPDoSPrevention 4 } gs2352pARPIPDoSPreventionServerPort2 OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " Port, range: 0 - port number. 0: none. " ::= { gs2352pARPIPDoSPrevention 5 } gs2352pARPIPDoSPreventionServerPort3 OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " Port, range: 0 - port number. 0: none. " ::= { gs2352pARPIPDoSPrevention 6 } gs2352pARPIPDoSPreventionServerPort4 OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " Port, range: 0 - port number. 0: none. " ::= { gs2352pARPIPDoSPrevention 7 } gs2352pDHCPSnooping OBJECT IDENTIFIER ::= { gs2352pSecurity 3 } gs2352pDHCPSnoopingConf OBJECT IDENTIFIER ::= { gs2352pDHCPSnooping 1 } gs2352pDHCPSnoopingMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable" ::= { gs2352pDHCPSnoopingConf 1 } gs2352pDHCPSnoopingPortModeConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PDHCPSnoopingPortModeConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingConf 2 } gs2352pDHCPSnoopingPortModeConfigurationEntry OBJECT-TYPE SYNTAX GS2352PDHCPSnoopingPortModeConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pDHCPSnoopingPortModeConfigurationPort } ::= { gs2352pDHCPSnoopingPortModeConfigurationTable 1 } GS2352PDHCPSnoopingPortModeConfigurationEntry ::= SEQUENCE { gs2352pDHCPSnoopingPortModeConfigurationPort Integer32, gs2352pDHCPSnoopingPortModeConfigurationMode INTEGER } gs2352pDHCPSnoopingPortModeConfigurationPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingPortModeConfigurationEntry 1 } gs2352pDHCPSnoopingPortModeConfigurationMode OBJECT-TYPE SYNTAX INTEGER { trust(0), untrust(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: trust port mode 1: untrust port mode" ::= { gs2352pDHCPSnoopingPortModeConfigurationEntry 2 } gs2352pDHCPSnoopingStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PDHCPSnoopingStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnooping 2 } gs2352pDHCPSnoopingStatisticsEntry OBJECT-TYPE SYNTAX GS2352PDHCPSnoopingStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pDHCPSnoopingStatisticsPort } ::= { gs2352pDHCPSnoopingStatisticsTable 1 } GS2352PDHCPSnoopingStatisticsEntry ::= SEQUENCE { gs2352pDHCPSnoopingStatisticsPort Integer32, gs2352pDHCPSnoopingStatisticsClear INTEGER, gs2352pDHCPSnoopingRxDiscover Counter32, gs2352pDHCPSnoopingRxOffer Counter32, gs2352pDHCPSnoopingRxRequest Counter32, gs2352pDHCPSnoopingRxDecline Counter32, gs2352pDHCPSnoopingRxACK Counter32, gs2352pDHCPSnoopingRxNAK Counter32, gs2352pDHCPSnoopingRxRelease Counter32, gs2352pDHCPSnoopingRxInform Counter32, gs2352pDHCPSnoopingRxLeaseQuery Counter32, gs2352pDHCPSnoopingRxLeaseUnassigned Counter32, gs2352pDHCPSnoopingRxLeaseUnknown Counter32, gs2352pDHCPSnoopingRxLeaseActive Counter32, gs2352pDHCPSnoopingTxDiscover Counter32, gs2352pDHCPSnoopingTxOffer Counter32, gs2352pDHCPSnoopingTxRequest Counter32, gs2352pDHCPSnoopingTxDecline Counter32, gs2352pDHCPSnoopingTxACK Counter32, gs2352pDHCPSnoopingTxNAK Counter32, gs2352pDHCPSnoopingTxRelease Counter32, gs2352pDHCPSnoopingTxInform Counter32, gs2352pDHCPSnoopingTxLeaseQuery Counter32, gs2352pDHCPSnoopingTxLeaseUnassigned Counter32, gs2352pDHCPSnoopingTxLeaseUnknown Counter32, gs2352pDHCPSnoopingTxLeaseActive Counter32 } gs2352pDHCPSnoopingStatisticsPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 1 } gs2352pDHCPSnoopingStatisticsClear OBJECT-TYPE SYNTAX INTEGER { none(0), clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: clear" ::= { gs2352pDHCPSnoopingStatisticsEntry 2 } gs2352pDHCPSnoopingRxDiscover OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 3 } gs2352pDHCPSnoopingRxOffer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 4 } gs2352pDHCPSnoopingRxRequest OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 5 } gs2352pDHCPSnoopingRxDecline OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 6 } gs2352pDHCPSnoopingRxACK OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 7 } gs2352pDHCPSnoopingRxNAK OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 8 } gs2352pDHCPSnoopingRxRelease OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 9 } gs2352pDHCPSnoopingRxInform OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 10 } gs2352pDHCPSnoopingRxLeaseQuery OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 11 } gs2352pDHCPSnoopingRxLeaseUnassigned OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 12 } gs2352pDHCPSnoopingRxLeaseUnknown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 13 } gs2352pDHCPSnoopingRxLeaseActive OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 14 } gs2352pDHCPSnoopingTxDiscover OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 15 } gs2352pDHCPSnoopingTxOffer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 16 } gs2352pDHCPSnoopingTxRequest OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 17 } gs2352pDHCPSnoopingTxDecline OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 18 } gs2352pDHCPSnoopingTxACK OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 19 } gs2352pDHCPSnoopingTxNAK OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 20 } gs2352pDHCPSnoopingTxRelease OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 21 } gs2352pDHCPSnoopingTxInform OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 22 } gs2352pDHCPSnoopingTxLeaseQuery OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 23 } gs2352pDHCPSnoopingTxLeaseUnassigned OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 24 } gs2352pDHCPSnoopingTxLeaseUnknown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 25 } gs2352pDHCPSnoopingTxLeaseActive OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPSnoopingStatisticsEntry 26 } gs2352pDHCPRelay OBJECT IDENTIFIER ::= { gs2352pSecurity 4 } gs2352pDHCPRelayConfiguration OBJECT IDENTIFIER ::= { gs2352pDHCPRelay 1 } gs2352pDHCPRelayMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable We need at least one server" ::= { gs2352pDHCPRelayConfiguration 1 } gs2352pDHCPRelayServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { gs2352pDHCPRelayConfiguration 2 } gs2352pDHCPRelayInformationMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2352pDHCPRelayConfiguration 3 } gs2352pDHCPRelayInformationPolicy OBJECT-TYPE SYNTAX INTEGER { replace(0), keep(1), drop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: replace 1: keep 2: drop " ::= { gs2352pDHCPRelayConfiguration 4 } gs2352pDHCPRelayInformationCustom OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP Option 82 Circuit ID custom information" ::= { gs2352pDHCPRelayConfiguration 1500 } gs2352pDHCPRelayConfigurationGateways OBJECT IDENTIFIER ::= { gs2352pDHCPRelayConfiguration 5 } gs2352pDHCPRelayConfigurationGatewaysCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create entry" ::= { gs2352pDHCPRelayConfigurationGateways 1 } gs2352pDHCPRelayConfigurationGatewaysTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pDHCPRelayConfigurationGatewaysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create DHCP Relay Gateway IP address entry." ::= { gs2352pDHCPRelayConfigurationGateways 2 } gs2352pDHCPRelayConfigurationGatewaysEntry OBJECT-TYPE SYNTAX Gs2352pDHCPRelayConfigurationGatewaysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pDHCPRelayConfigurationGatewaysIndex } ::= { gs2352pDHCPRelayConfigurationGatewaysTable 1 } Gs2352pDHCPRelayConfigurationGatewaysEntry ::= SEQUENCE { gs2352pDHCPRelayConfigurationGatewaysIndex Integer32, gs2352pDHCPRelayConfigurationGatewaysVLANId Integer32, gs2352pDHCPRelayConfigurationGatewaysIP IpAddress, gs2352pDHCPRelayConfigurationGatewaysRowStatus INTEGER } gs2352pDHCPRelayConfigurationGatewaysIndex OBJECT-TYPE SYNTAX Integer32(1..6) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pDHCPRelayConfigurationGatewaysEntry 1 } gs2352pDHCPRelayConfigurationGatewaysVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN ID " ::= { gs2352pDHCPRelayConfigurationGatewaysEntry 2 } gs2352pDHCPRelayConfigurationGatewaysIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP GIADDR address." ::= { gs2352pDHCPRelayConfigurationGatewaysEntry 3 } gs2352pDHCPRelayConfigurationGatewaysRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy 5: undo" ::= { gs2352pDHCPRelayConfigurationGatewaysEntry 4 } gs2352pDHCPRelayStatistics OBJECT IDENTIFIER ::= { gs2352pDHCPRelay 2 } gs2352pDHCPRelayServerStatistics OBJECT IDENTIFIER ::= { gs2352pDHCPRelayStatistics 1 } gs2352pServerStatTransmitToServer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPRelayServerStatistics 1 } gs2352pServerStatTransmitError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPRelayServerStatistics 2 } gs2352pServerStatReceiveFromServer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPRelayServerStatistics 3 } gs2352pServerStatReceiveMissingAgentOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPRelayServerStatistics 4 } gs2352pServerStatReceiveMissingCircuitID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPRelayServerStatistics 5 } gs2352pServerStatReceiveMissingRemoteID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPRelayServerStatistics 6 } gs2352pServerStatReceiveBadCircuitID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPRelayServerStatistics 7 } gs2352pServerStatReceiveBadRemoteID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPRelayServerStatistics 8 } gs2352pDHCPRelayClientStatistics OBJECT IDENTIFIER ::= { gs2352pDHCPRelayStatistics 2 } gs2352pClientStatTransmitToClient OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPRelayClientStatistics 1 } gs2352pClientStatTransmitError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPRelayClientStatistics 2 } gs2352pClientStatReceivefromClient OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPRelayClientStatistics 3 } gs2352pClientStatReceiveAgentOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPRelayClientStatistics 4 } gs2352pClientStatReplaceAgentOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPRelayClientStatistics 5 } gs2352pClientStatKeepAgentOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPRelayClientStatistics 6 } gs2352pClientStatDropAgentOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pDHCPRelayClientStatistics 7 } gs2352pPortSecurity OBJECT IDENTIFIER ::= { gs2352pSecurity 5 } gs2352pPortSecLimitCtrl OBJECT IDENTIFIER ::= { gs2352pPortSecurity 1 } gs2352pPortSecLimitCtrlSystemConf OBJECT IDENTIFIER ::= { gs2352pPortSecLimitCtrl 1 } gs2352pPortSecurityMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2352pPortSecLimitCtrlSystemConf 1 } gs2352pPortSecurityAging OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2352pPortSecLimitCtrlSystemConf 2 } gs2352pPortSecurityAgingPeriod OBJECT-TYPE SYNTAX INTEGER(10..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 3600, range: 10-10000000 " ::= { gs2352pPortSecLimitCtrlSystemConf 3 } gs2352pPortSecLimitCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PPortSecLimitCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pPortSecLimitCtrl 2 } gs2352pPortSecLimitCtrlEntry OBJECT-TYPE SYNTAX GS2352PPortSecLimitCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pPortSecLimitCtrlPort } ::= { gs2352pPortSecLimitCtrlTable 1 } GS2352PPortSecLimitCtrlEntry ::= SEQUENCE { gs2352pPortSecLimitCtrlPort Integer32, gs2352pPortSecLimitCtrlPortMode INTEGER, gs2352pPortSecLimitCtrlPortLimit Integer32, gs2352pPortSecLimitCtrlPortAction INTEGER, gs2352pPortSecLimitCtrlPortState DisplayString, gs2352pPortSecLimitCtrlPortReOpen INTEGER } gs2352pPortSecLimitCtrlPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pPortSecLimitCtrlEntry 1 } gs2352pPortSecLimitCtrlPortMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable" ::= { gs2352pPortSecLimitCtrlEntry 2 } gs2352pPortSecLimitCtrlPortLimit OBJECT-TYPE SYNTAX Integer32(1..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 4, range: 1-1024" ::= { gs2352pPortSecLimitCtrlEntry 3 } gs2352pPortSecLimitCtrlPortAction OBJECT-TYPE SYNTAX INTEGER { none(0), trap(1), shutdown(2), trapShutdown(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: trap 2: shutdown 3: trap&shutdown" ::= { gs2352pPortSecLimitCtrlEntry 4 } gs2352pPortSecLimitCtrlPortState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pPortSecLimitCtrlEntry 5 } gs2352pPortSecLimitCtrlPortReOpen OBJECT-TYPE SYNTAX INTEGER { none(0), reopen(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: reopen" ::= { gs2352pPortSecLimitCtrlEntry 6 } gs2352pPortSecSwitchStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PPortSecSwitchStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pPortSecurity 2 } gs2352pPortSecSwitchStatusEntry OBJECT-TYPE SYNTAX GS2352PPortSecSwitchStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pPortSecSwitchStatusPort } ::= { gs2352pPortSecSwitchStatusTable 1 } GS2352PPortSecSwitchStatusEntry ::= SEQUENCE { gs2352pPortSecSwitchStatusPort Integer32, gs2352pPortSecSwitchStatusUsers DisplayString, gs2352pPortSecSwitchStatusState DisplayString, gs2352pPortSecSwitchStatusMACCountCurrent Integer32, gs2352pPortSecSwitchStatusMACCountLimit Integer32 } gs2352pPortSecSwitchStatusPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pPortSecSwitchStatusEntry 1 } gs2352pPortSecSwitchStatusUsers OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Users Abbr: L = Limit Control, 8 = 802.1X, D = DHCP Snooping, V = Voice VLAN, '-' means that the corresponding user module is not enabled. " ::= { gs2352pPortSecSwitchStatusEntry 2 } gs2352pPortSecSwitchStatusState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Shows the current state of the port : Disabled, Ready, Limit Reached, Shutdown. " ::= { gs2352pPortSecSwitchStatusEntry 3 } gs2352pPortSecSwitchStatusMACCountCurrent OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pPortSecSwitchStatusEntry 4 } gs2352pPortSecSwitchStatusMACCountLimit OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2352pPortSecSwitchStatusEntry 5 } gs2352pPortSecPortStatus OBJECT IDENTIFIER ::= { gs2352pPortSecurity 3 } gs2352pPortSecPortStatusPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "port number default: 1 range: 1 - port number." ::= { gs2352pPortSecPortStatus 1 } gs2352pPortSecPortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PPortSecPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pPortSecPortStatus 2 } gs2352pPortSecPortStatusEntry OBJECT-TYPE SYNTAX GS2352PPortSecPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pPortSecPortStatusIndex } ::= { gs2352pPortSecPortStatusTable 1 } GS2352PPortSecPortStatusEntry ::= SEQUENCE { gs2352pPortSecPortStatusIndex Integer32, gs2352pPortSecPortStatusMACAddress MacAddress, gs2352pPortSecPortStatusVLANId Integer32, gs2352pPortSecPortStatusState DisplayString, gs2352pPortSecPortStatusTimeOfAddition DisplayString, gs2352pPortSecPortStatusAgeAndHold DisplayString } gs2352pPortSecPortStatusIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pPortSecPortStatusEntry 1 } gs2352pPortSecPortStatusMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortSecPortStatusEntry 2 } gs2352pPortSecPortStatusVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortSecPortStatusEntry 3 } gs2352pPortSecPortStatusState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Blocked / Forwarding " ::= { gs2352pPortSecPortStatusEntry 4 } gs2352pPortSecPortStatusTimeOfAddition OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortSecPortStatusEntry 5 } gs2352pPortSecPortStatusAgeAndHold OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pPortSecPortStatusEntry 6 } gs2352pAccessManagement OBJECT IDENTIFIER ::= { gs2352pSecurity 6 } gs2352pAccessMgtConf OBJECT IDENTIFIER ::= { gs2352pAccessManagement 1 } gs2352pAccessMgtConfMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2352pAccessMgtConf 1 } gs2352pAccessMgtConfCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: create " ::= { gs2352pAccessMgtConf 2 } gs2352pAccessMgtConfTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PAccessMgtConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pAccessMgtConf 3 } gs2352pAccessMgtConfEntry OBJECT-TYPE SYNTAX GS2352PAccessMgtConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pAccessMgtIndex } ::= { gs2352pAccessMgtConfTable 1 } GS2352PAccessMgtConfEntry ::= SEQUENCE { gs2352pAccessMgtIndex Integer32, gs2352pAccessMgtAddresstype INTEGER, gs2352pAccessMgtStartIpAddress DisplayString, gs2352pAccessMgtEndIpAddress DisplayString, gs2352pAccessMgtHttpHttps INTEGER, gs2352pAccessMgtSNMP INTEGER, gs2352pAccessMgtTelnetSSH INTEGER, gs2352pAccessMgtRowStatus INTEGER } gs2352pAccessMgtIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Set Access Management config index range : 1-16." ::= { gs2352pAccessMgtConfEntry 1 } gs2352pAccessMgtAddresstype OBJECT-TYPE SYNTAX INTEGER { ipv4(0), ipv6(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0: ipv4 1: ipv6 " ::= { gs2352pAccessMgtConfEntry 2 } gs2352pAccessMgtStartIpAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Start IP address. IP address doesn't allowed all zero or all 'ff'H." ::= { gs2352pAccessMgtConfEntry 3 } gs2352pAccessMgtEndIpAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " End IP address. IP address doesn't allowed all zero or all 'ff'H. End ip address is not less than start ip address." ::= { gs2352pAccessMgtConfEntry 4 } gs2352pAccessMgtHttpHttps OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2352pAccessMgtConfEntry 5 } gs2352pAccessMgtSNMP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2352pAccessMgtConfEntry 6 } gs2352pAccessMgtTelnetSSH OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2352pAccessMgtConfEntry 7 } gs2352pAccessMgtRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), edit(3),destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 3: edit 4: destroy 5: undo" ::= { gs2352pAccessMgtConfEntry 8 } gs2352pAccessMgtStatistics OBJECT IDENTIFIER ::= { gs2352pAccessManagement 2 } gs2352pHttpReceivedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pAccessMgtStatistics 1 } gs2352pHttpAllowedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pAccessMgtStatistics 2 } gs2352pHttpDiscardedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pAccessMgtStatistics 3 } gs2352pHttpsReceivedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pAccessMgtStatistics 4 } gs2352pHttpsAllowedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pAccessMgtStatistics 5 } gs2352pHttpsDiscardedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pAccessMgtStatistics 6 } gs2352pSnmpReceivedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pAccessMgtStatistics 7 } gs2352pSnmpAllowedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pAccessMgtStatistics 8 } gs2352pSnmpDiscardedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pAccessMgtStatistics 9 } gs2352pTelnetReceivedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pAccessMgtStatistics 10 } gs2352pTelnetAllowedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pAccessMgtStatistics 11 } gs2352pTelnetDiscardedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pAccessMgtStatistics 12 } gs2352pSSHReceivedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pAccessMgtStatistics 13 } gs2352pSSHAllowedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pAccessMgtStatistics 14 } gs2352pSSHDiscardedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2352pAccessMgtStatistics 15 } gs2352pAccessMgtStatisticsClearAll OBJECT-TYPE SYNTAX INTEGER { none(0), clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0: none 1: clear" ::= { gs2352pAccessMgtStatistics 16 } gs2352pSSH OBJECT IDENTIFIER ::= { gs2352pSecurity 7 } gs2352pSSHMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: disable 1: enable" ::= { gs2352pSSH 1 } gs2352pHTTPS OBJECT IDENTIFIER ::= { gs2352pSecurity 8 } gs2352pHTTPSMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: disable 1: enable" ::= { gs2352pHTTPS 1 } gs2352pHTTPSAutoRedirect OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable" ::= { gs2352pHTTPS 2 } gs2352pHTTPSCertRenew OBJECT-TYPE SYNTAX INTEGER { doNothing(0), renew(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 , 0: doNothing 1: renew" ::= { gs2352pHTTPS 3 } gs2352pHTTPSMinProtoVersion OBJECT-TYPE SYNTAX INTEGER { SSLv3(0), TLSv1(1), TLSv11(2), TLSv12(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: SSLv3 1: TLSv1 2: TLSv1.1 3: TLSv1.2" ::= { gs2352pHTTPS 4 } gs2352pHTTPMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: disable 1: enable" ::= { gs2352pHTTPS 5 } gs2352pAuthMethod OBJECT IDENTIFIER ::= { gs2352pSecurity 9 } gs2352pConsoleAuthMethod OBJECT-TYPE SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: none 1: local 2: RADIUS 3: TACACS+" ::= { gs2352pAuthMethod 1 } gs2352pConsoleFallback OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:disable 1:enable" ::= { gs2352pAuthMethod 2 } gs2352pTelnetAuthMethod OBJECT-TYPE SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: none 1: local 2: RADIUS 3: TACACS+" ::= { gs2352pAuthMethod 3 } gs2352pTelnetFallback OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:disable 1:enable" ::= { gs2352pAuthMethod 4 } gs2352pSshAuthMethod OBJECT-TYPE SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: none 1: local 2: RADIUS 3: TACACS+" ::= { gs2352pAuthMethod 5 } gs2352pSshFallback OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:disable 1:enable" ::= { gs2352pAuthMethod 6 } gs2352pTftpAuthMethod OBJECT-TYPE SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: none 1: local 2: RADIUS 3: TACACS+" ::= { gs2352pAuthMethod 9 } gs2352pTftpFallback OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:disable 1:enable" ::= { gs2352pAuthMethod 10 } gs2352pLoginFailures OBJECT-TYPE SYNTAX Integer32(0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "When login failures mechanism is triggered,the lock minutes will prevent to login in this periods. The value '0' should deactivate this feature. range: 0-99. default: 5." ::= { gs2352pAuthMethod 11 } gs2352pLockMinutes OBJECT-TYPE SYNTAX Integer32(1..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Lock time to login failures trigger. range: 1-99. default: 5." ::= { gs2352pAuthMethod 12 } gs2352pHttpAuthMethod OBJECT-TYPE SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: none 1: local 2: RADIUS 3: TACACS+" ::= { gs2352pAuthMethod 13 } gs2352pHttpFallback OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:disable 1:enable" ::= { gs2352pAuthMethod 14 } gs2352pHttpsAuthMethod OBJECT-TYPE SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: none 1: local 2: RADIUS 3: TACACS+" ::= { gs2352pAuthMethod 15 } gs2352pHttpsFallback OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:disable 1:enable" ::= { gs2352pAuthMethod 16 } gs2352pAAA OBJECT IDENTIFIER ::= { gs2352pSecurity 10 } gs2352pAAACommonServer OBJECT IDENTIFIER ::= { gs2352pAAA 1 } gs2352pAAACommonServerTimeout OBJECT-TYPE SYNTAX Integer32(3..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "The Timeout, which can be set to a number between 3 and 3600 seconds, is the maximum time to wait for a reply from a server. If the server does not reply within this timeframe, we will consider it to be dead and continue with the next enabled server (if any). RADIUS servers are using the UDP protocol, which is unreliable by design. In order to cope with lost frames, the timeout interval is divided into 3 subintervals of equal length. If a reply is not received within the subinterval, the request is transmitted again. This algorithm causes the RADIUS server to be queried up to 3 times before it is considered to be dead. default: 15." ::= { gs2352pAAACommonServer 1 } gs2352pAAACommonServerDeadTime OBJECT-TYPE SYNTAX Integer32(0..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "The Dead Time, which can be set to a number between 0 and 3600 seconds, is the period during which the switch will not send new requests to a server that has failed to respond to a previous request. This will stop the switch from continually trying to contact a server that it has already determined as dead. Setting the Dead Time to a value greater than 0 (zero) will enable this feature, but only if more than one server has been configured. default: 300." ::= { gs2352pAAACommonServer 2 } gs2352pAAATACACSPlusAuthAndAccounting OBJECT IDENTIFIER ::= { gs2352pAAA 2 } gs2352pAAAAuthorization OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Authorization is the action of determining what a user is allowed to do. An authorization request may indicate that the user is not authenticated. In this case it is up to the authorization agent to determine if an unauthenticated user is allowed the services in question. " ::= { gs2352pAAATACACSPlusAuthAndAccounting 1 } gs2352pAAAFallbackToLocalAuthorization OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This function is an auxiliary function of Authorization. When the DUT cannot communicate with TACACS+ Server normally, it will check the right/ permission level of the Local Account to execute the Authorization. " ::= { gs2352pAAATACACSPlusAuthAndAccounting 2 } gs2352pAAAAccounting OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Accounting is typically the third action after authentication and authorization. Accounting is the action of recording what a user is doing, and/or has done. TACACS+ accounting records contain all the information used in the authorization records and resource usage information. " ::= { gs2352pAAATACACSPlusAuthAndAccounting 3 } gs2352pRADIUSAuthenticationServerTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pRADIUSAuthenticationServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pAAA 3 } gs2352pRADIUSAuthenticationServerEntry OBJECT-TYPE SYNTAX Gs2352pRADIUSAuthenticationServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pRADIUSAuthenticationServerIndex } ::= { gs2352pRADIUSAuthenticationServerTable 1 } Gs2352pRADIUSAuthenticationServerEntry ::= SEQUENCE { gs2352pRADIUSAuthenticationServerIndex Integer32, gs2352pRADIUSAuthenticationServerEnable INTEGER, gs2352pRADIUSAuthenticationServerIP DisplayString, gs2352pRADIUSAuthenticationServerPort Integer32, gs2352pRADIUSAuthenticationServerSecret DisplayString } gs2352pRADIUSAuthenticationServerIndex OBJECT-TYPE SYNTAX Integer32(1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "RADIUS Authentication Server index range : 1-5." ::= { gs2352pRADIUSAuthenticationServerEntry 1 } gs2352pRADIUSAuthenticationServerEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the RADIUS Authentication Server. the RADIUSAuthenticationServerEnable can be set, when IP and Secret have value " ::= { gs2352pRADIUSAuthenticationServerEntry 2 } gs2352pRADIUSAuthenticationServerIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address or hostname of the RADIUS Authentication Server. IP address is expressed in dotted decimal notation. " ::= { gs2352pRADIUSAuthenticationServerEntry 3 } gs2352pRADIUSAuthenticationServerPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port to use on the RADIUS Authentication Server. If the port is set to 0 (zero), the default port (1812) is used on the RADIUS Authentication Server. " ::= { gs2352pRADIUSAuthenticationServerEntry 4 } gs2352pRADIUSAuthenticationServerSecret OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The secret - up to 64 characters long - shared between the RADIUS Authentication Server and the switch. " ::= { gs2352pRADIUSAuthenticationServerEntry 5 } gs2352pRADIUSAccountingServerTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pRADIUSAccountingServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pAAA 4 } gs2352pRADIUSAccountingServerEntry OBJECT-TYPE SYNTAX Gs2352pRADIUSAccountingServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pRADIUSAccountingServerIndex } ::= { gs2352pRADIUSAccountingServerTable 1 } Gs2352pRADIUSAccountingServerEntry ::= SEQUENCE { gs2352pRADIUSAccountingServerIndex Integer32, gs2352pRADIUSAccountingServerEnable INTEGER, gs2352pRADIUSAccountingServerIP DisplayString, gs2352pRADIUSAccountingServerPort Integer32, gs2352pRADIUSAccountingServerSecret DisplayString } gs2352pRADIUSAccountingServerIndex OBJECT-TYPE SYNTAX Integer32(1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "RADIUS Accounting Server index range : 1-5." ::= { gs2352pRADIUSAccountingServerEntry 1 } gs2352pRADIUSAccountingServerEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the RADIUS Accounting Server. The RADIUSAccountingServerEnable can be set, when IP and Secret have value. " ::= { gs2352pRADIUSAccountingServerEntry 2 } gs2352pRADIUSAccountingServerIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address or hostname of the RADIUS Accounting Server. IP address is expressed in dotted decimal notation. " ::= { gs2352pRADIUSAccountingServerEntry 3 } gs2352pRADIUSAccountingServerPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port to use on the RADIUS Accounting Server. If the port is set to 0 (zero), the default port (1812) is used on the RADIUS Accounting Server. " ::= { gs2352pRADIUSAccountingServerEntry 4 } gs2352pRADIUSAccountingServerSecret OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The secret - up to 64 characters long - shared between the RADIUS Accounting Server and the switch. " ::= { gs2352pRADIUSAccountingServerEntry 5 } gs2352pTACACSPlusAuthenticationServerTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pTACACSPlusAuthenticationServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pAAA 5 } gs2352pTACACSPlusAuthenticationServerEntry OBJECT-TYPE SYNTAX Gs2352pTACACSPlusAuthenticationServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pTACACSPlusAuthenticationServerIndex } ::= { gs2352pTACACSPlusAuthenticationServerTable 1 } Gs2352pTACACSPlusAuthenticationServerEntry ::= SEQUENCE { gs2352pTACACSPlusAuthenticationServerIndex Integer32, gs2352pTACACSPlusAuthenticationServerEnable INTEGER, gs2352pTACACSPlusAuthenticationServerIP DisplayString, gs2352pTACACSPlusAuthenticationServerPort Integer32, gs2352pTACACSPlusAuthenticationServerSecret DisplayString } gs2352pTACACSPlusAuthenticationServerIndex OBJECT-TYPE SYNTAX Integer32(1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "TACACSPlus Authentication Server index range : 1-5." ::= { gs2352pTACACSPlusAuthenticationServerEntry 1 } gs2352pTACACSPlusAuthenticationServerEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the TACACSPlus Authentication Server. The TACACSPlusAuthenticationServerEnable can be set, when IP and Secret have value." ::= { gs2352pTACACSPlusAuthenticationServerEntry 2 } gs2352pTACACSPlusAuthenticationServerIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address or hostname of the TACACSPlus Authentication Server. IP address is expressed in dotted decimal notation. " ::= { gs2352pTACACSPlusAuthenticationServerEntry 3 } gs2352pTACACSPlusAuthenticationServerPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port to use on the TACACSPlus Authentication Server. If the port is set to 0 (zero), the default port (1812) is used on the TACACSPlus Authentication Server. " ::= { gs2352pTACACSPlusAuthenticationServerEntry 4 } gs2352pTACACSPlusAuthenticationServerSecret OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The secret - up to 64 characters long - shared between the TACACSPlus Authentication Server and the switch. " ::= { gs2352pTACACSPlusAuthenticationServerEntry 5 } gs2352pRADIUSStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pRADIUSStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pAAA 6 } gs2352pRADIUSStatisticsEntry OBJECT-TYPE SYNTAX Gs2352pRADIUSStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pRADIUSAuthStatisticsServerIndex } ::= { gs2352pRADIUSStatisticsTable 1 } Gs2352pRADIUSStatisticsEntry ::= SEQUENCE { gs2352pRADIUSAuthStatisticsServerIndex Integer32, gs2352pRADIUSAuthStatisticsRecPktAccessAccepts Counter32, gs2352pRADIUSAuthStatisticsRecPktAccessRejects Counter32, gs2352pRADIUSAuthStatisticsRecPktAccessChallenges Counter32, gs2352pRADIUSAuthStatisticsRecPktMalformedAccResponses Counter32, gs2352pRADIUSAuthStatisticsRecPktBadAuthenticators Counter32, gs2352pRADIUSAuthStatisticsRecPktUnknownTypes Counter32, gs2352pRADIUSAuthStatisticsRecPktDropped Counter32, gs2352pRADIUSAuthStatisticsTransmitPktAccessRequests Counter32, gs2352pRADIUSAuthStatisticsTransmitPktAccessRetransmissions Counter32, gs2352pRADIUSAuthStatisticsTransmitPktPendingRequests Counter32, gs2352pRADIUSAuthStatisticsTransmitPktTimeouts Counter32, gs2352pRADIUSAuthIP DisplayString, gs2352pRADIUSAuthState DisplayString, gs2352pRADIUSAuthRoundTripTime DisplayString, gs2352pRADIUSAccountingStatisticsRecPktResponses Counter32, gs2352pRADIUSAccountingStatisticsRecPktMalformedResponses Counter32, gs2352pRADIUSAccountingStatisticsRecPktBadAuthenticators Counter32, gs2352pRADIUSAccountingStatisticsRecPktUnknownTypes Counter32, gs2352pRADIUSAccountingStatisticsRecPktDropped Counter32, gs2352pRADIUSAccountingStatisticsTransmitPktRequests Counter32, gs2352pRADIUSAccountingStatisticsTransmitPktRetransmissions Counter32, gs2352pRADIUSAccountingStatisticsTransmitPktPendingRequests Counter32, gs2352pRADIUSAccountingStatisticsTransmitPktTimeouts Counter32, gs2352pRADIUSAccountingIP DisplayString, gs2352pRADIUSAccountingState DisplayString, gs2352pRADIUSAccountingRoundTripTime DisplayString, gs2352pRADIUSStatisticsClear INTEGER } gs2352pRADIUSAuthStatisticsServerIndex OBJECT-TYPE SYNTAX Integer32(1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "RADIUS Authentication Server index range : 1-5." ::= { gs2352pRADIUSStatisticsEntry 1 } gs2352pRADIUSAuthStatisticsRecPktAccessAccepts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Accept packets (valid or invalid) received from the server." ::= { gs2352pRADIUSStatisticsEntry 2 } gs2352pRADIUSAuthStatisticsRecPktAccessRejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Reject packets (valid or invalid) received from the server." ::= { gs2352pRADIUSStatisticsEntry 3 } gs2352pRADIUSAuthStatisticsRecPktAccessChallenges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Challenge packets (valid or invalid) received from the server. " ::= { gs2352pRADIUSStatisticsEntry 4 } gs2352pRADIUSAuthStatisticsRecPktMalformedAccResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed RADIUS Access-Response packets received from the server. Malformed packets include packets with an invalid length. Bad authenticators or Message Authenticator attributes or unknown types are not included as malformed access responses. " ::= { gs2352pRADIUSStatisticsEntry 5 } gs2352pRADIUSAuthStatisticsRecPktBadAuthenticators OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Response packets containing invalid authenticators or Message Authenticator attributes received from the server." ::= { gs2352pRADIUSStatisticsEntry 6 } gs2352pRADIUSAuthStatisticsRecPktUnknownTypes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets that were received with unknown types from the server on the authentication port and dropped." ::= { gs2352pRADIUSStatisticsEntry 7 } gs2352pRADIUSAuthStatisticsRecPktDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets that were received from the server on the authentication port and dropped for some other reason." ::= { gs2352pRADIUSStatisticsEntry 8 } gs2352pRADIUSAuthStatisticsTransmitPktAccessRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets sent to the server. This does not include retransmissions." ::= { gs2352pRADIUSStatisticsEntry 9 } gs2352pRADIUSAuthStatisticsTransmitPktAccessRetransmissions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets retransmitted to the RADIUS authentication server." ::= { gs2352pRADIUSStatisticsEntry 10 } gs2352pRADIUSAuthStatisticsTransmitPktPendingRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets destined for the server that have not yet timed out or received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an Access-Accept, Access-Reject, Access-Challenge, timeout, or retransmission. " ::= { gs2352pRADIUSStatisticsEntry 11 } gs2352pRADIUSAuthStatisticsTransmitPktTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of authentication timeouts to the server. After a timeout, the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a Request as well as a timeout. " ::= { gs2352pRADIUSStatisticsEntry 12 } gs2352pRADIUSAuthIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IP address and UDP port for the authentication server in question." ::= { gs2352pRADIUSStatisticsEntry 13 } gs2352pRADIUSAuthState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the state of the server. It takes one of the following values: Disabled: The selected server is disabled. Not Ready: The server is enabled, but IP communication is not yet up and running. Ready: The server is enabled, IP communication is up and running, and the RADIUS module is ready to accept access attempts. Dead (X seconds left): Access attempts were made to this server, but it did not reply within the configured timeout. The server has temporarily been disabled, but will get re-enabled when the dead-time expires. The number of seconds left before this occurs is displayed in parentheses. This state is only reachable when more than one server is enabled. " ::= { gs2352pRADIUSStatisticsEntry 14 } gs2352pRADIUSAuthRoundTripTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval (measured in milliseconds) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from the RADIUS authentication server. The granularity of this measurement is 100 ms. A value of 0 ms indicates that there hasn't been round-trip communication with the server yet. " ::= { gs2352pRADIUSStatisticsEntry 15 } gs2352pRADIUSAccountingStatisticsRecPktResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets (valid or invalid) received from the server." ::= { gs2352pRADIUSStatisticsEntry 16 } gs2352pRADIUSAccountingStatisticsRecPktMalformedResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed RADIUS packets received from the server. Malformed packets include packets with an invalid length. Bad authenticators or unknown types are not included as malformed access responses. " ::= { gs2352pRADIUSStatisticsEntry 17 } gs2352pRADIUSAccountingStatisticsRecPktBadAuthenticators OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets containing invalid authenticators received from the server." ::= { gs2352pRADIUSStatisticsEntry 18 } gs2352pRADIUSAccountingStatisticsRecPktUnknownTypes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets of unknown types that were received from the server on the accounting port." ::= { gs2352pRADIUSStatisticsEntry 19 } gs2352pRADIUSAccountingStatisticsRecPktDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets that were received from the server on the accounting port and dropped for some other reason." ::= { gs2352pRADIUSStatisticsEntry 20 } gs2352pRADIUSAccountingStatisticsTransmitPktRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets sent to the server. This does not include retransmissions." ::= { gs2352pRADIUSStatisticsEntry 21 } gs2352pRADIUSAccountingStatisticsTransmitPktRetransmissions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets retransmitted to the RADIUS accounting server." ::= { gs2352pRADIUSStatisticsEntry 22 } gs2352pRADIUSAccountingStatisticsTransmitPktPendingRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets destined for the server that have not yet timed out or received a response. This variable is incremented when a Request is sent and decremented due to receipt of a Response, timeout, or retransmission. " ::= { gs2352pRADIUSStatisticsEntry 23 } gs2352pRADIUSAccountingStatisticsTransmitPktTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of accounting timeouts to the server. After a timeout, the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a Request as well as a timeout. " ::= { gs2352pRADIUSStatisticsEntry 24 } gs2352pRADIUSAccountingIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IP address and UDP port for the accounting server in question." ::= { gs2352pRADIUSStatisticsEntry 25 } gs2352pRADIUSAccountingState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Shows the state of the server. It takes one of the following values: Disabled: The selected server is disabled. Not Ready: The server is enabled, but IP communication is not yet up and running. Ready: The server is enabled, IP communication is up and running, and the RADIUS module is ready to accept accounting attempts. Dead (X seconds left): Accounting attempts were made to this server, but it did not reply within the configured timeout. The server has temporarily been disabled, but will get re-enabled when the dead-time expires. The number of seconds left before this occurs is displayed in parentheses. This state is only reachable when more than one server is enabled. " ::= { gs2352pRADIUSStatisticsEntry 26 } gs2352pRADIUSAccountingRoundTripTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval (measured in milliseconds) between the most recent Response and the Request that matched it from the RADIUS accounting server. The granularity of this measurement is 100 ms. A value of 0 ms indicates that there hasn't been round-trip communication with the server yet. " ::= { gs2352pRADIUSStatisticsEntry 27 } gs2352pRADIUSStatisticsClear OBJECT-TYPE SYNTAX INTEGER(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Clears the counters for the server. read: always 0 clear: set 1" ::= { gs2352pRADIUSStatisticsEntry 28 } gs2352pNAS OBJECT IDENTIFIER ::= { gs2352pSecurity 11 } gs2352pNASConfiguration OBJECT IDENTIFIER ::= { gs2352pNAS 1 } gs2352pNASConfigMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if NAS is globally enabled or disabled on the switch. If globally disabled, all ports are allowed forwarding of frames." ::= { gs2352pNASConfiguration 1 } gs2352pNASConfigReauthEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "If checked, successfully authenticated supplicants/clients are reauthenticated after the interval specified by the Reauthentication Period. Reauthentication for 802.1X-enabled ports can be used to detect if a new device is plugged into a switch port or if a supplicant is no longer attached. For MAC-based ports, reauthentication is only useful if the RADIUS server configuration has changed. It does not involve communication between the switch and the client, and therefore doesn't imply that a client is still present on a port." ::= { gs2352pNASConfiguration 2 } gs2352pNASConfigReauthPeriod OBJECT-TYPE SYNTAX Integer32(1..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the period, in seconds, after which a connected client must be reauthenticated. This is only active if the Reauthentication Enabled checkbox is checked. range: 1 - 3600 seconds." ::= { gs2352pNASConfiguration 3 } gs2352pNASConfigEAPOLTimeout OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the time for retransmission of Request Identity EAPOL frames. This has no effect for MAC-based ports. range: 1 - 65535 seconds." ::= { gs2352pNASConfiguration 4 } gs2352pNASConfigAgingPeriod OBJECT-TYPE SYNTAX Integer32(10..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "When the NAS module uses the Port Security module to secure MAC addresses, the Port Security module needs to check for activity on the MAC address in question at regular intervals and free resources if no activity is seen within a given period of time. Admin State supported : Single, Multi and MAC-Based Auth. 802.1X. range: 10 - 1000000 seconds." ::= { gs2352pNASConfiguration 5 } gs2352pNASConfigHoldTime OBJECT-TYPE SYNTAX Integer32(10..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "If a client is denied access - either because the RADIUS server denies the client access or because the RADIUS server request times out - the client is put on hold in the Unauthorized state. The hold timer does not count during an on-going authentication. In MAC-based Auth. mode, the switch will ignore new frames coming from the client during the hold time. Admin State supported : Single, Multi and MAC-Based Auth. 802.1X. range: 10 - 1000000 seconds." ::= { gs2352pNASConfiguration 6 } gs2352pNASConfigRADIUSAssignedQoSEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "RADIUS-assigned QoS provides a means to centrally control the traffic class to which traffic coming from a successfully authenticated supplicant is assigned on the switch. The RADIUS server must be configured to transmit special RADIUS attributes to take advantage of this feature." ::= { gs2352pNASConfiguration 7 } gs2352pNASConfigRADIUSAssignedVLANEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "RADIUS-assigned VLAN provides a means to centrally control the VLAN on which a successfully authenticated supplicant is placed on the switch. Incoming traffic will be classified to and switched on the RADIUS-assigned VLAN. The RADIUS server must be configured to transmit special RADIUS attributes to take advantage of this feature.When enable, the individual ports' ditto setting determine whether RADIUS-assigned VLAN is enabled on that port. When disable, RADIUS-server assigned VLAN is disabled on all ports. " ::= { gs2352pNASConfiguration 8 } gs2352pNASConfigGuestVLANEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "A Guest VLAN is a special VLAN - typically with limited network access - on which 802.1X-unaware clients are placed after a network administrator-defined timeout. The switch follows a set of rules for entering and leaving the Guest VLAN as listed below.When enable, the individual ports' ditto setting determines whether the port can be moved into Guest VLAN. When disable, the ability to move to the Guest VLAN is disabled on all ports. " ::= { gs2352pNASConfiguration 9 } gs2352pNASConfigGuestVLANID OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the value that a port's Port VLAN ID is set to if a port is moved into the Guest VLAN. It is only changeable if the Guest VLAN option is globally enabled. range: 1 - 4094." ::= { gs2352pNASConfiguration 10 } gs2352pNASConfigMaxReauthCount OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of times the switch transmits an EAPOL Request Identity frame without response before considering entering the Guest VLAN is adjusted with this setting. The value can only be changed if the Guest VLAN option is globally enabled. range: 1 - 255." ::= { gs2352pNASConfiguration 11 } gs2352pNASConfigAllowGuestVLANEAPOLSeen OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The switch remembers if an EAPOL frame has been received on the port for the life-time of the port. Once the switch considers whether to enter the Guest VLAN, it will first check if this option is enabled or disabled. If disabled, the switch will only enter the Guest VLAN if an EAPOL frame has not been received on the port for the life-time of the port. If enabled (checked), the switch will consider entering the Guest VLAN even if an EAPOL frame has been received on the port for the life-time of the port.The value can only be changed if the Guest VLAN option is globally enabled." ::= { gs2352pNASConfiguration 12 } gs2352pNASConfigMacBasedUseEAP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The switch can do the RADIUS authentication on behalf of the client in the MAC-based Auth. port authentication mode. It can either present itself as a normal 802.1X client to the RADIUS Server and use EAP, supporting only the MD5-Challenge, or alternativly can use plain RADIUS with username / passwort authentification without EAP if this setting is disabled." ::= { gs2352pNASConfiguration 101 } gs2352pNASPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pNASPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { gs2352pNASConfiguration 13 } gs2352pNASPortConfigEntry OBJECT-TYPE SYNTAX Gs2352pNASPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pNASPortConfigPort } ::= { gs2352pNASPortConfigTable 1 } Gs2352pNASPortConfigEntry ::= SEQUENCE { gs2352pNASPortConfigPort Integer32, gs2352pNASPortConfigAdminState INTEGER, gs2352pNASPortConfigRADIUSAssignedQoSEnabled INTEGER, gs2352pNASPortConfigRADIUSAssignedVLANEnabled INTEGER, gs2352pNASPortConfigGuestVLANEnabled INTEGER, gs2352pNASPortConfigPortState DisplayString, gs2352pNASPortConfigReauthenticate INTEGER, gs2352pNASPortConfigReinitialize INTEGER } gs2352pNASPortConfigPort OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2352pNASPortConfigEntry 1 } gs2352pNASPortConfigAdminState OBJECT-TYPE SYNTAX INTEGER{ forceAuthorized(1), forceUnauthorized(2), portBased(3), single(4), multi(5), macBased(6), macBasedSingle(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This selection controls the port's authentication mode. 1: Force Authorized, 2: Force Unauthorized, 3: Port-based 802.1X, 4: Single 802.1X, 5: Multi 802.1X, 6: MAC-based Auth, 7: MAC-based Single Auth." ::= { gs2352pNASPortConfigEntry 2 } gs2352pNASPortConfigRADIUSAssignedQoSEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When RADIUS-Assigned QoS is both globally enabled and enabled (checked) on a given port, the switch reacts to QoS Class information carried in the RADIUS Access-Accept packet transmitted by the RADIUS server when a supplicant is successfully authenticated. If present and valid, traffic received on the supplicant's port will be classified to the given QoS Class. Admin State supported : Port-based and Single 802.1X and MAC-based Single Auth." ::= { gs2352pNASPortConfigEntry 3 } gs2352pNASPortConfigRADIUSAssignedVLANEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When RADIUS-Assigned VLAN is both globally enabled and enabled (checked) for a given port, the switch reacts to VLAN ID information carried in the RADIUS Access-Accept packet transmitted by the RADIUS server when a supplicant is successfully authenticated. If present and valid, the port's Port VLAN ID will be changed to this VLAN ID, the port will be set to be a member of that VLAN ID, and the port will be forced into VLAN unaware mode. Once assigned, all traffic arriving on the port will be classified and switched on the RADIUS-assigned VLAN ID. Admin State supported : Port-based and Single 802.1X and MAC-based Single Auth." ::= { gs2352pNASPortConfigEntry 4 } gs2352pNASPortConfigGuestVLANEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When Guest VLAN is both globally enabled and enabled (checked) for a given port, the switch considers moving the port into the Guest VLAN according to the rules outlined below. Admin State supported : Port-based , Single and Multi 802.1X." ::= { gs2352pNASPortConfigEntry 5 } gs2352pNASPortConfigPortState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Globally Disabled: NAS is globally disabled. Link Down: NAS is globally enabled, but there is no link on the port. Authorized: The port is in Force Authorized or a single-supplicant mode and the supplicant is authorized. Unauthorized: The port is in Force Unauthorized or a single-supplicant mode and the supplicant is not successfully authorized by the RADIUS server. X Auth/Y Unauth: The port is in a multi-supplicant mode. Currently X clients are authorized and Y are unauthorized." ::= { gs2352pNASPortConfigEntry 6 } gs2352pNASPortConfigReauthenticate OBJECT-TYPE SYNTAX INTEGER { doNothing(0), do(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Schedules a reauthentication whenever the quiet-period of the port runs out (EAPOL-based authentication). For MAC-based authentication, reauthentication will be attempted immediately.The button only has effect for successfully authenticated clients on the port and will not cause the clients to get temporarily unauthorized." ::= { gs2352pNASPortConfigEntry 7 } gs2352pNASPortConfigReinitialize OBJECT-TYPE SYNTAX INTEGER { doNothing(0), do(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Forces a reinitialization of the clients on the port and thereby a reauthentication immediately. The clients will transfer to the unauthorized state while the reauthentication is in progress." ::= { gs2352pNASPortConfigEntry 8 } gs2352pNASSwitchStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pNASSwitchStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { gs2352pNAS 2 } gs2352pNASSwitchStatusEntry OBJECT-TYPE SYNTAX Gs2352pNASSwitchStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pNASPortConfigPort } ::= { gs2352pNASSwitchStatusTable 1 } Gs2352pNASSwitchStatusEntry ::= SEQUENCE { gs2352pNASSwitchStatusAdminState DisplayString, gs2352pNASSwitchStatusPortState DisplayString, gs2352pNASSwitchStatusLastSource DisplayString, gs2352pNASSwitchStatusLastID DisplayString, gs2352pNASSwitchStatusQoSClass DisplayString, gs2352pNASSwitchStatusPortVlanID DisplayString } gs2352pNASSwitchStatusAdminState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The port's current administrative state. Refer to NAS Admin State for a description of possible values." ::= { gs2352pNASSwitchStatusEntry 2 } gs2352pNASSwitchStatusPortState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the port. Refer to NAS Port State for a description of the individual states." ::= { gs2352pNASSwitchStatusEntry 3 } gs2352pNASSwitchStatusLastSource OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The source MAC address carried in the most recently received EAPOL frame for EAPOL-based authentication, and the most recently received frame from a new client for MAC-based authentication." ::= { gs2352pNASSwitchStatusEntry 4 } gs2352pNASSwitchStatusLastID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The user name (supplicant identity) carried in the most recently received Response Identity EAPOL frame for EAPOL-based authentication, and the source MAC address from the most recently received frame from a new client for MAC-based authentication." ::= { gs2352pNASSwitchStatusEntry 5 } gs2352pNASSwitchStatusQoSClass OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "QoS Class assigned to the port by the RADIUS server if enabled." ::= { gs2352pNASSwitchStatusEntry 6 } gs2352pNASSwitchStatusPortVlanID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID that NAS has put the port in. The field is blank, if the Port VLAN ID is not overridden by NAS." ::= { gs2352pNASSwitchStatusEntry 7 } gs2352pNASPortStatus OBJECT IDENTIFIER ::= { gs2352pNAS 3 } gs2352pNASPortStatusCountersTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pNASPortStatusCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { gs2352pNASPortStatus 1 } gs2352pNASPortStatusCountersEntry OBJECT-TYPE SYNTAX Gs2352pNASPortStatusCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pNASPortConfigPort } ::= { gs2352pNASPortStatusCountersTable 1 } Gs2352pNASPortStatusCountersEntry ::= SEQUENCE { gs2352pNASRxCountersEAPOLTotal Counter32, gs2352pNASRxCountersEAPOLResponseID Counter32, gs2352pNASRxCountersEAPOLResponses Counter32, gs2352pNASRxCountersEAPOLStart Counter32, gs2352pNASRxCountersEAPOLLogoff Counter32, gs2352pNASRxCountersEAPOLInvalidType Counter32, gs2352pNASRxCountersEAPOLInvalidLength Counter32, gs2352pNASTxCountersEAPOLTotal Counter32, gs2352pNASTxCountersEAPOLRequestID Counter32, gs2352pNASTxCountersEAPOLRequests Counter32, gs2352pNASRxBackendServerCountersAccessChallenges Counter32, gs2352pNASRxBackendServerCountersOtherRequests Counter32, gs2352pNASRxBackendServerCountersAuthSuccesses Counter32, gs2352pNASRxBackendServerCountersAuthFailures Counter32, gs2352pNASTxBackendServerCountersResponses Counter32, gs2352pNASLastSupplicantInfoMACAddress DisplayString, gs2352pNASLastSupplicantInfoVlanID Integer32, gs2352pNASLastSupplicantInfoVersion Integer32, gs2352pNASLastSupplicantInfoIdentity DisplayString, gs2352pNASCountersDoClear INTEGER } gs2352pNASRxCountersEAPOLTotal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL frames of any type that have been received by the switch." ::= { gs2352pNASPortStatusCountersEntry 2 } gs2352pNASRxCountersEAPOLResponseID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL Response Identity frames that have been received by the switch." ::= { gs2352pNASPortStatusCountersEntry 3 } gs2352pNASRxCountersEAPOLResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL response frames (other than Response Identity frames) that have been received by the switch." ::= { gs2352pNASPortStatusCountersEntry 4 } gs2352pNASRxCountersEAPOLStart OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL Start frames that have been received by the switch." ::= { gs2352pNASPortStatusCountersEntry 5 } gs2352pNASRxCountersEAPOLLogoff OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL Logoff frames that have been received by the switch." ::= { gs2352pNASPortStatusCountersEntry 6 } gs2352pNASRxCountersEAPOLInvalidType OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames that have been received by the switch in which the frame type is not recognized." ::= { gs2352pNASPortStatusCountersEntry 7 } gs2352pNASRxCountersEAPOLInvalidLength OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames that have been received by the switch in which the Packet Body Length field is invalid." ::= { gs2352pNASPortStatusCountersEntry 8 } gs2352pNASTxCountersEAPOLTotal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames of any type that have been transmitted by the switch." ::= { gs2352pNASPortStatusCountersEntry 9 } gs2352pNASTxCountersEAPOLRequestID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL Request Identity frames that have been transmitted by the switch." ::= { gs2352pNASPortStatusCountersEntry 10 } gs2352pNASTxCountersEAPOLRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL Request frames (other than Request Identity frames) that have been transmitted by the switch." ::= { gs2352pNASPortStatusCountersEntry 11 } gs2352pNASRxBackendServerCountersAccessChallenges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based: Counts the number of times that the switch receives the first request from the backend server following the first response from the supplicant. MAC-based: Counts all Access Challenges received from the backend server for this port or client." ::= { gs2352pNASPortStatusCountersEntry 12 } gs2352pNASRxBackendServerCountersOtherRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based: Counts the number of times that the switch sends an EAP Request packet following the first to the supplicant. MAC-based: Not applicable." ::= { gs2352pNASPortStatusCountersEntry 13 } gs2352pNASRxBackendServerCountersAuthSuccesses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the switch receives a success indication. Indicates that the supplicant/client has successfully authenticated to the backend server." ::= { gs2352pNASPortStatusCountersEntry 14 } gs2352pNASRxBackendServerCountersAuthFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the switch receives a failure message. This indicates that the supplicant/client has not authenticated to the backend server. " ::= { gs2352pNASPortStatusCountersEntry 15 } gs2352pNASTxBackendServerCountersResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based: Counts the number of times that the switch attempts to send a supplicant's first response packet to the backend server. Indicates the switch attempted communication with the backend server. Possible retransmissions are not counted. MAC-based: Counts all the backend server packets sent from the switch towards the backend server for a given port or client. Possible retransmissions are not counted." ::= { gs2352pNASPortStatusCountersEntry 16 } gs2352pNASLastSupplicantInfoMACAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the last supplicant/client." ::= { gs2352pNASPortStatusCountersEntry 17 } gs2352pNASLastSupplicantInfoVlanID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID on which the last frame from the last supplicant/client was received." ::= { gs2352pNASPortStatusCountersEntry 18 } gs2352pNASLastSupplicantInfoVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based: The protocol version number carried in the most recently received EAPOL frame. MAC-based: Not applicable." ::= { gs2352pNASPortStatusCountersEntry 19 } gs2352pNASLastSupplicantInfoIdentity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based: The user name (supplicant identity) carried in the most recently received Response Identity EAPOL frame. MAC-based: Not applicable." ::= { gs2352pNASPortStatusCountersEntry 20 } gs2352pNASCountersDoClear OBJECT-TYPE SYNTAX INTEGER { doNothing(0), do(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the counters for the selected port." ::= { gs2352pNASPortStatusCountersEntry 21 } gs2352pNASPortStatusClientsTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2352pNASPortStatusClientsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { gs2352pNASPortStatus 2 } gs2352pNASPortStatusClientsEntry OBJECT-TYPE SYNTAX Gs2352pNASPortStatusClientsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pNASPortConfigPort, gs2352pNASClientsIndex} ::= { gs2352pNASPortStatusClientsTable 1 } Gs2352pNASPortStatusClientsEntry ::= SEQUENCE { gs2352pNASClientsIndex Integer32, gs2352pNASClientsIdentity DisplayString, gs2352pNASClientsMACAddress DisplayString, gs2352pNASClientsVlanID Integer32, gs2352pNASClientsState DisplayString, gs2352pNASClientsLastAuth DisplayString, gs2352pNASRxClientsEAPOLTotal Counter32, gs2352pNASRxClientsEAPOLResponseID Counter32, gs2352pNASRxClientsEAPOLResponses Counter32, gs2352pNASRxClientsEAPOLStart Counter32, gs2352pNASRxClientsEAPOLLogoff Counter32, gs2352pNASRxClientsEAPOLInvalidType Counter32, gs2352pNASRxClientsEAPOLInvalidLength Counter32, gs2352pNASTxClientsEAPOLTotal Counter32, gs2352pNASTxClientsEAPOLRequestID Counter32, gs2352pNASTxClientsEAPOLRequests Counter32, gs2352pNASRxBackendServerClientsAccessChallenges Counter32, gs2352pNASRxBackendServerClientsOtherRequests Counter32, gs2352pNASRxBackendServerClientsAuthSuccesses Counter32, gs2352pNASRxBackendServerClientsAuthFailures Counter32, gs2352pNASTxBackendServerClientsResponses Counter32 } gs2352pNASClientsIndex OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of client table in the port." ::= { gs2352pNASPortStatusClientsEntry 1 } gs2352pNASClientsIdentity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the identity of the supplicant, as received in the Response Identity EAPOL frame.This isn't available for MAC-based Auth." ::= { gs2352pNASPortStatusClientsEntry 2 } gs2352pNASClientsMACAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Multi 802.1X, this column holds the MAC address of the attached supplicant. MAC-based Auth., this column holds the MAC address of the attached client." ::= { gs2352pNASPortStatusClientsEntry 3 } gs2352pNASClientsVlanID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "This column holds the VLAN ID that the corresponding client is currently secured through the Port Security module." ::= { gs2352pNASPortStatusClientsEntry 4 } gs2352pNASClientsState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The client can either be authenticated or unauthenticated. In the authenticated state, it is allowed to forward frames on the port, and in the unauthenticated state, it is blocked." ::= { gs2352pNASPortStatusClientsEntry 5 } gs2352pNASClientsLastAuth OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the date and time of the last authentication of the client." ::= { gs2352pNASPortStatusClientsEntry 6 } gs2352pNASRxClientsEAPOLTotal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL frames of any type that have been received by the switch." ::= { gs2352pNASPortStatusClientsEntry 7 } gs2352pNASRxClientsEAPOLResponseID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL Response Identity frames that have been received by the switch." ::= { gs2352pNASPortStatusClientsEntry 8 } gs2352pNASRxClientsEAPOLResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL response frames (other than Response Identity frames) that have been received by the switch." ::= { gs2352pNASPortStatusClientsEntry 9 } gs2352pNASRxClientsEAPOLStart OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL Start frames that have been received by the switch." ::= { gs2352pNASPortStatusClientsEntry 10 } gs2352pNASRxClientsEAPOLLogoff OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL Logoff frames that have been received by the switch." ::= { gs2352pNASPortStatusClientsEntry 11 } gs2352pNASRxClientsEAPOLInvalidType OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames that have been received by the switch in which the frame type is not recognized." ::= { gs2352pNASPortStatusClientsEntry 12 } gs2352pNASRxClientsEAPOLInvalidLength OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames that have been received by the switch in which the Packet Body Length field is invalid." ::= { gs2352pNASPortStatusClientsEntry 13 } gs2352pNASTxClientsEAPOLTotal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames of any type that have been transmitted by the switch." ::= { gs2352pNASPortStatusClientsEntry 14 } gs2352pNASTxClientsEAPOLRequestID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL Request Identity frames that have been transmitted by the switch." ::= { gs2352pNASPortStatusClientsEntry 15 } gs2352pNASTxClientsEAPOLRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL Request frames (other than Request Identity frames) that have been transmitted by the switch." ::= { gs2352pNASPortStatusClientsEntry 16 } gs2352pNASRxBackendServerClientsAccessChallenges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based: Counts the number of times that the switch receives the first request from the backend server following the first response from the supplicant. MAC-based: Counts all Access Challenges received from the backend server for this port or client." ::= { gs2352pNASPortStatusClientsEntry 17 } gs2352pNASRxBackendServerClientsOtherRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based: Counts the number of times that the switch sends an EAP Request packet following the first to the supplicant. MAC-based: Not applicable." ::= { gs2352pNASPortStatusClientsEntry 18 } gs2352pNASRxBackendServerClientsAuthSuccesses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the switch receives a success indication. Indicates that the supplicant/client has successfully authenticated to the backend server." ::= { gs2352pNASPortStatusClientsEntry 19 } gs2352pNASRxBackendServerClientsAuthFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the switch receives a failure message. This indicates that the supplicant/client has not authenticated to the backend server. " ::= { gs2352pNASPortStatusClientsEntry 20 } gs2352pNASTxBackendServerClientsResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based: Counts the number of times that the switch attempts to send a supplicant's first response packet to the backend server. Indicates the switch attempted communication with the backend server. Possible retransmissions are not counted. MAC-based: Counts all the backend server packets sent from the switch towards the backend server for a given port or client. Possible retransmissions are not counted." ::= { gs2352pNASPortStatusClientsEntry 21 } gs2352pMaintenance OBJECT IDENTIFIER ::= { lancomGS2352P 4 } gs2352pRestartDevice OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:none 1:yes" ::= { gs2352pMaintenance 1 } gs2352pColdRestartDevice OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:none 1:yes" ::= { gs2352pMaintenance 1500 } gs2352pFirmware OBJECT IDENTIFIER ::= { gs2352pMaintenance 2 } gs2352pFirmwareIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the firmware tftp server." ::= { gs2352pFirmware 1 } gs2352pFirmwareFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the path and filename for firmware upgrading." ::= { gs2352pFirmware 2 } gs2352pDoFirmwareUpgrade OBJECT-TYPE SYNTAX INTEGER { doNothing(0), do(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Do firmware upgrade. Get this OID always return zero. 1 - do firmware upgrade. 0 - do nothing." ::= { gs2352pFirmware 3 } gs2352pSaveOrRestore OBJECT IDENTIFIER ::= { gs2352pMaintenance 3 } gs2352pFactoryDefaults OBJECT-TYPE SYNTAX INTEGER { none(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:none 1:yes" ::= { gs2352pSaveOrRestore 1 } gs2352pSaveStart OBJECT-TYPE SYNTAX INTEGER { none(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:none 1:yes" ::= { gs2352pSaveOrRestore 2 } gs2352pSaveUser OBJECT-TYPE SYNTAX INTEGER { none(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:none 1:yes" ::= { gs2352pSaveOrRestore 3 } gs2352pRestoreUser OBJECT-TYPE SYNTAX INTEGER { none(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:none 1:yes" ::= { gs2352pSaveOrRestore 4 } gs2352pExportOrImport OBJECT IDENTIFIER ::= { gs2352pMaintenance 4 } gs2352pExportIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the export tftp server." ::= { gs2352pExportOrImport 1 } gs2352pExportConfigName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the export file path and name." ::= { gs2352pExportOrImport 2 } gs2352pDoExportConfig OBJECT-TYPE SYNTAX INTEGER{ doNothing(0), do(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Do export-config. Get this OID always return zero. 1 - export." ::= { gs2352pExportOrImport 3 } gs2352pImportIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the import tftp server." ::= { gs2352pExportOrImport 4 } gs2352pImportConfigName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the import file path and name." ::= { gs2352pExportOrImport 5 } gs2352pDoImportConfig OBJECT-TYPE SYNTAX INTEGER{ doNothing(0), do(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Do export-config. Get this OID always return zero. 1 - import." ::= { gs2352pExportOrImport 6 } gs2352pDiagnostics OBJECT IDENTIFIER ::= { gs2352pMaintenance 5 } gs2352pPingIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The destination IP Address. " ::= { gs2352pDiagnostics 1 } gs2352pPingSize OBJECT-TYPE SYNTAX Integer32(0|60..1400) MAX-ACCESS read-write STATUS current DESCRIPTION " Size of ICMP echo packet. range : 60-1400, default : 64. " ::= { gs2352pDiagnostics 2 } gs2352pDoPingConfig OBJECT-TYPE SYNTAX INTEGER{ doNothing(0), do(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Do ping-config. Get this OID always return zero. 1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host or gateway. " ::= { gs2352pDiagnostics 3 } gs2352pPingResult OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Show ping result. " ::= { gs2352pDiagnostics 4 } gs2352pPing6IpAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " The destination IPv6 Address. " ::= { gs2352pDiagnostics 5 } gs2352pPing6Size OBJECT-TYPE SYNTAX Integer32(0|60..1400) MAX-ACCESS read-write STATUS current DESCRIPTION " Size of ICMP echo packet. range : 60-1400, default : 64. " ::= { gs2352pDiagnostics 6 } gs2352pDoPing6Config OBJECT-TYPE SYNTAX INTEGER{ doNothing(0), do(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Do ping-config. Get this OID always return zero. 1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host or gateway. " ::= { gs2352pDiagnostics 7 } gs2352pPing6Result OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Show ping result. " ::= { gs2352pDiagnostics 8 } gs2352pVeriPHY OBJECT IDENTIFIER ::= { gs2352pDiagnostics 9 } gs2352pVeriPHYTest OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "Run VeriPHY Cable Diagnostics. port, range : 0 - port number. 0 : ALL " ::= { gs2352pVeriPHY 1 } gs2352pVeriPHYTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2352PVeriPHYEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2352pVeriPHY 2 } gs2352pVeriPHYEntry OBJECT-TYPE SYNTAX GS2352PVeriPHYEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2352pVeriPHYPort } ::= { gs2352pVeriPHYTable 1 } GS2352PVeriPHYEntry ::= SEQUENCE { gs2352pVeriPHYPort Integer32, gs2352pVeriPHYPairA DisplayString, gs2352pVeriPHYLengthA DisplayString, gs2352pVeriPHYPairB DisplayString, gs2352pVeriPHYLengthB DisplayString, gs2352pVeriPHYPairC DisplayString, gs2352pVeriPHYLengthC DisplayString, gs2352pVeriPHYPairD DisplayString, gs2352pVeriPHYLengthD DisplayString } gs2352pVeriPHYPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " The length (in meters) of the cable pair. " ::= { gs2352pVeriPHYEntry 1 } gs2352pVeriPHYPairA OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The status of the cable pair. " ::= { gs2352pVeriPHYEntry 2 } gs2352pVeriPHYLengthA OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The length (in meters) of the cable pair. " ::= { gs2352pVeriPHYEntry 3 } gs2352pVeriPHYPairB OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The status of the cable pair. " ::= { gs2352pVeriPHYEntry 4 } gs2352pVeriPHYLengthB OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The length (in meters) of the cable pair. " ::= { gs2352pVeriPHYEntry 5 } gs2352pVeriPHYPairC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The status of the cable pair. " ::= { gs2352pVeriPHYEntry 6 } gs2352pVeriPHYLengthC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The length (in meters) of the cable pair. " ::= { gs2352pVeriPHYEntry 7 } gs2352pVeriPHYPairD OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The status of the cable pair. " ::= { gs2352pVeriPHYEntry 8 } gs2352pVeriPHYLengthD OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The length (in meters) of the cable pair. " ::= { gs2352pVeriPHYEntry 9 } ------------------------------------------------------------------------------------------------------------------ gs2352pTrap OBJECT IDENTIFIER ::= { lancomGS2352P 5 } gs2352pTrapEvent OBJECT IDENTIFIER ::= { gs2352pTrap 1 } gs2352pEmergency NOTIFICATION-TYPE OBJECTS { gs2352pInformation } STATUS current DESCRIPTION "The severity level is Emergency. The system is unusable." ::= { gs2352pTrapEvent 1 } gs2352pAlert NOTIFICATION-TYPE OBJECTS { gs2352pInformation } STATUS current DESCRIPTION "The severity level is Alert. The action must be taken immediately." ::= { gs2352pTrapEvent 2 } gs2352pCritical NOTIFICATION-TYPE OBJECTS { gs2352pInformation } STATUS current DESCRIPTION "The severity level is Critical. Critical conditions." ::= { gs2352pTrapEvent 3 } gs2352pError NOTIFICATION-TYPE OBJECTS { gs2352pInformation } STATUS current DESCRIPTION "The severity level is Error. Error conditions." ::= { gs2352pTrapEvent 4 } gs2352pWarning NOTIFICATION-TYPE OBJECTS { gs2352pInformation } STATUS current DESCRIPTION "The severity level is Warning. Warning conditions." ::= { gs2352pTrapEvent 5 } gs2352pNotice NOTIFICATION-TYPE OBJECTS { gs2352pInformation } STATUS current DESCRIPTION "The severity level is Notice. Normal but significant condition." ::= { gs2352pTrapEvent 6 } gs2352pInformational NOTIFICATION-TYPE OBJECTS { gs2352pInformation } STATUS current DESCRIPTION "The severity level is Informational. Informational messages." ::= { gs2352pTrapEvent 7 } gs2352pDebug NOTIFICATION-TYPE OBJECTS { gs2352pInformation } STATUS current DESCRIPTION "The severity level is Debug. debug-level messages." ::= { gs2352pTrapEvent 8 } gs2352pTrapVariable OBJECT IDENTIFIER ::= { gs2352pTrap 2 } gs2352pInformation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Trap information." ::= { gs2352pTrapVariable 1 } END